802.1x认证

wuhu

今天弄了一下802。1x，是用mdc-ssd

1. 
   
2. [root@macro mdc-ssd]# mdc-ssd&
   
3. [3] 4136
   
4. mdc-ssd options in effect:
   
5. nodetach                # (from /etc/mdc-ssd/options)
   
6. logfd 1         # (from /etc/mdc-ssd/options)
   
7. dump            # (from /etc/mdc-ssd/options)
   
8. TLSdebug                # (from /etc/mdc-ssd/options)
   
9. [root@macro mdc-ssd]# TLSstate          # (from /etc/mdc-ssd/options)
   
10. TLSbugs         # (from /etc/mdc-ssd/options)
    
11. cli.c:149: bind: Address already in use
    
12. mdc-ssd: Unable to open socket to communicate with p8021xc client. If mdc-ssd is already running, use clientPort option.
    
13. mdc-ssd: Unable to open socket to communicate with p8021xc client. If mdc-ssd is already running, use clientPort option.
    

复制代码

这个怎么回事啊？
用ifup eth0的时候，老是说决定ip的信息，然后就不动了，
而且还看不到mdc-ssd的代码，郁闷！
有成功的兄弟，指点一下小弟