我的combo驱动问题

terryshi

本人Panasonic notebook中的使用的是UJDA710(ATAPI)，无法被k3b识别，查找linuxsir中的文章，进行测试，结果如下：
-------------------------------------------------------------------
cdrecord -scanbus
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?g Schilling
cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
------------------------------------------------------------------
cdrecord dev=help
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J?g Schilling
Supported SCSI transports for this platform:

Transport name:         sg
Transport descr.:       Generic transport independent SCSI
Transp. layer ind.:
Target specifier:       bus,target,lun
Target example:         1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported

Transport name:         pg
Transport descr.:       SCSI transport for ATAPI over Parallel Port
Transp. layer ind.:
Target specifier:       bus,target,lun
Target example:         1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported

Transport name:         ATA
Transport descr.:       ATA Packet specific SCSI transport
Transp. layer ind.:     ATAPI:
Target specifier:       bus,target,lun
Target example:         ATAPI:1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported

Transport name:         RSCSI
Transport descr.:       Remote SCSI
Transp. layer ind.:     REMOTE:
Target specifier:       rscsi@host:bus,target,lun
Target example:         REMOTE:rscsi@host:1,2,0
SCSI Bus scanning:      supported
Open via UNIX device:   not supported
------------------------------------------------------------------
ls -lR /lib | grep ide-scsi
ide-scsi.o
------------------------------------------------------------------
是不是我的cdwriter不被支持？
或者我要重新编译内核？
请指教。谢谢！

北南南北

请弟兄们指点一下,多谢.

http://www.linuxsir.cn/forum.php?mod=viewthread&tid=31154