Debian用命令连接无线网的问题

wingfy01

用的是自带的驱动，然后我在/etc/network/interfaces里设置成非自动启动就是去掉auto；开机手动启动无线网卡，用ifup wlan0命令，当然在interfaces里设置成dhcp， mode是auto，但是每次用ifup wlan0 后总是显示：
Error for wireless request "Set Mode" (8B06) :
    SET failed on device wlan0 ; Invalid argument.
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
Listening on LPF/wlan0/00:1f:3b:44:11:27
Sending on   LPF/wlan0/00:1f:3b:44:11:27
Sending on   Socket/fallback
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 13
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 17
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 4
No DHCPOFFERS received.
No working leases in persistent database - sleeping.

我之只能ifdown wlan0,然后再ifup wlan0；反复多次后才连上无线网!这是为什么？
弱弱的问问下，我用ifup wlan0，系统会用到interfaces文件吗 ？我的interfaces是：
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
iface wlan0 inet dhcp
        # wireless-* options are implemented by the wireless-tools package
        wireless-mode auto
        wireless-essid NETCORE
        wireless-key1 ABCDEF0987
        # dns-* options are implemented by the resolvconf package, if installed
        dns-nameservers 192.168.1.1
#The primary network intreface
#auto eth0
#iface eth0 inet static
#address 192.168.1.110
#netmask 255.255.255.0
#gateway 192.168.1.1
#network 192.168.1.0
#broadcast 192.168.1.255

debian是5.01        
还有wmaster是干什么用的：


wmaster0  Link encap:UNSPEC  HWaddr 00-1F-3B-44-11-27-6C-6F-00-00-00-00-00-00-00-00  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)


谢谢！在线等

yangzhe1990

那就把wireless-mode那行去了
错误信息写得很清楚

wingfy01

Post by yangzhe1990;1984638
那就把wireless-mode那行去了
错误信息写得很清楚

注释掉是没问题了，那么还是显示：
wmaster0: unknown hardware address type 801
wmaster0: unknown hardware address type 801
这是怎么回事？
wmaster是干什么用的？
为什么不能手动配置mode？
谢谢
在线等

alonersir

wmaster0: unknown hardware address type 801
这个我也有，没什么影响。