用大于27内核就频繁死机

cbkid · 发表于 2008-12-2 13:45:39

新装的系统，用genkernel作了个2.6.27-r4内核，然后装上kde之后就频繁死机，以前用也有过类似的问题，所以换到26-r3,不死。
因为26-r3是用genkernel作的，不太想用（一开机他的亮度就被调到最低了。）所以考虑可能是显卡的问题。装了28内核用gem，用了一天没有死机，今天却连续死了三次。希望各位仁兄帮帮忙看看。

dmesg26
Initializing cgroup subsys cpuset
Linux version 2.6.26-gentoo-r3 (root@cbkidlll) (gcc version 4.3.2 (Gentoo 4.3.2 p1.2) ) #3 SMP Sat Nov 29 16:40:54 CST 2008
Command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda7 agp=try_unsupported
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
BIOS-e820: 000000003f6d0000 - 000000003f6df000 (ACPI NVS)
BIOS-e820: 000000003f6df000 - 0000000040000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 259792) 1 entries of 256 used
max_pfn_mapped = 1048576
init_memory_mapping
DMI present.
ACPI: RSDP 000F80B0, 0024 (r2 PTLTD )
ACPI: XSDT 3F6D433A, 008C (r1 HASEE PARADISE 6040000 LTP 0)
ACPI: FACP 3F6DBC2C, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
ACPI: DSDT 3F6D6252, 5966 (r2 ECS___ F43_____ 6040000 INTL 20050624)
ACPI: FACS 3F6DEFC0, 0040
ACPI: APIC 3F6DBD20, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: HPET 3F6DBD88, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: MCFG 3F6DBDC0, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
ACPI: TMOR 3F6DBDFC, 0026 (r1 PTLTD 6040000 PTL 3)
ACPI: APIC 3F6DBE22, 0068 (r1 PTLTD APIC 6040000 LTP 0)
ACPI: SLIC 3F6DBE8A, 0176 (r1 HASEE PARADISE 6040000 LTP 0)
ACPI: SSDT 3F6D5C03, 064F (r1 SataRe SataPri 1000 INTL 20050624)
ACPI: SSDT 3F6D5567, 069C (r1 SataRe SataSec 1000 INTL 20050624)
ACPI: SSDT 3F6D5497, 00D0 (r1 BrtRef DD01BRT 1000 INTL 20050624)
ACPI: SSDT 3F6D4A03, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
ACPI: SSDT 3F6D495D, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
ACPI: SSDT 3F6D43C6, 0597 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 259792) 1 entries of 256 used
early res: 0 [0-fff] BIOS data page
early res: 1 [6000-7fff] TRAMPOLINE
early res: 2 [200000-80d3a7] TEXT DATA BSS
early res: 3 [36b95000-37fef2b5] RAMDISK
early res: 4 [9f800-fffff] BIOS reserved
early res: 5 [8000-afff] PGTABLE
[ffffe20000000000-ffffe20000dfffff] PMD -> [ffff810001200000-ffff810001ffffff] on node 0
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 259792
On node 0 totalpages: 259695
DMA zone: 56 pages used for memmap
DMA zone: 1653 pages reserved
DMA zone: 2290 pages, LIFO batch:0
DMA32 zone: 3496 pages used for memmap
DMA32 zone: 252200 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 35632 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 2
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254490
Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda7 agp=try_unsupported
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC calibrated against PM_TIMER
time.c: Detected 1462.983 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 995088k/1039168k available (3798k kernel code, 43136k reserved, 1127k data, 280k init)
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay using timer specific routine.. 2929.09 BogoMIPS (lpj=14645459)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20080321
CPU0: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz stepping 0d
Using local APIC timer interrupts.
APIC timer calibration result 8312403
Detected 8.312 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 2926.00 BogoMIPS (lpj=14630017)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (5855.09 BogoMIPS).
net_namespace: 1176 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG at e0000000 - efffffff
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: HASEE
ACPI: DMI Product Name: HASEE
ACPI: DMI Product Version:
ACPI: DMI Board Name: HASEE
ACPI: DMI BIOS Vendor: Phoenix Technologies LTD
ACPI: DMI BIOS Date: 08/03/2007
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: mem resource (0xf0401000-0xf0401fff) overlaps 0000:00:1c.0 BAR 9 (0xf0000000-0xf1ffffff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
DMAR:parse DMAR table failure.
PCI-GART: No AMD northbridge found.
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
system 00:06: ioport range 0x200-0x20f has been reserved
system 00:06: ioport range 0x260-0x26f has been reserved
system 00:06: ioport range 0x300-0x30f has been reserved
system 00:06: ioport range 0x378-0x387 has been reserved
system 00:06: ioport range 0x3f0-0x3ff could not be reserved
system 00:06: ioport range 0x680-0x69f has been reserved
system 00:06: ioport range 0x800-0x80f has been reserved
system 00:06: ioport range 0x1000-0x107f has been reserved
system 00:06: ioport range 0x1180-0x11bf has been reserved
system 00:06: ioport range 0x1640-0x164f has been reserved
system 00:06: ioport range 0xfe00-0xfe00 has been reserved
PCI: Bridge: 0000:00:1c.0
IO window: 2000-2fff
MEM window: 0xf6000000-0xf7ffffff
PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
PCI: Bridge: 0000:00:1c.2
IO window: 3000-3fff
MEM window: 0xf8000000-0xf9ffffff
PREFETCH window: 0x00000000f2000000-0x00000000f3ffffff
PCI: Bridge: 0000:00:1c.3
IO window: 4000-4fff
MEM window: 0xfa000000-0xfbffffff
PREFETCH window: 0x00000000f4000000-0x00000000f5ffffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 20840k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1228223582.392:1): initialized
squashfs: version 3.3 (2007/10/31) Phillip Lougher
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
GFS2 (built Nov 28 2008 14:13:09) installed
Lock_Nolock (built Nov 28 2008 14:13:21) installed
msgmni has been set to 1985
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:00:02.0: Boot video device
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
Allocate Port Service[0000:00:1c.2:pcie03]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
Allocate Port Service[0000:00:1c.3:pcie03]
Linux agpgart interface v0.103
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery absent)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /class/input/input0
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
ICH8M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1810-0x1817
ide1: BM-DMA at 0x1818-0x181f
Probing IDE interface ide0...
hda: TSSTcorpCDW/DVD TS-L462D, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide_generic: I/O resource 0x1F0-0x1F7 not free.
ide_generic: I/O resource 0x170-0x177 not free.
hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache
Uniform CD-ROM driver Revision: 3.20
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 280k freed
No dock devices found.
libata version 3.00 loaded.
input: PS/2 Logitech Wheel Mouse as /class/input/input2
CAPI Subsystem Rev 1.1.2.8
b1: revision 1.1.2.2
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1c00 ctl 0x18f4 bmdma 0x18e0 irq 19
ata2: SATA max UDMA/133 cmd 0x18f8 ctl 0x18f0 bmdma 0x18e8 irq 19
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Hitachi HTS541610J9SA00, SBCAC7MP, max UDMA/133
ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
ata2: SATA link down (SStatus 0 SControl 0)
isa bounce pool size: 16 pages
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBCA PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi: <fdomain> Detection failed (no card)
GDT-HA: Storage RAID Controller Driver. Version: 3.05
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Adaptec aacraid driver 1.1-5[2456]-ms
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
QLogic Fibre Channel HBA Driver: 8.02.01-k4
Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Copyright(c) 2004-2008 Emulex. All rights reserved.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 3-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 3-1: configuration #1 chosen from 1 choice
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
usb 5-1: new low speed USB device using uhci_hcd and address 2
usb 5-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: HID 04f3:0103 as /class/input/input3
input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1a.0-1
input: HID 04f3:0103 as /class/input/input4
input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1a.0-1
input: USB Mouse as /class/input/input5
input,hidraw2: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
async_tx: api initialized (async)
xor: automatically using best checksumming function: generic_sse
generic_sse: 5357.200 MB/sec
xor: using function: generic_sse (5357.200 MB/sec)
raid6: int64x1 1425 MB/s
raid6: int64x2 1819 MB/s
raid6: int64x4 1360 MB/s
raid6: int64x8 1253 MB/s
raid6: sse2x1 2337 MB/s
raid6: sse2x2 2572 MB/s
raid6: sse2x4 4430 MB/s
raid6: using algorithm sse2x4 (4430 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 7943, nTxLock = 63548
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: Power Button (FF) as /class/input/input6
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input7
input: PC Speaker as /class/input/input8
ACPI: Power Button (CM) [PWRB]
input: Lid Switch as /class/input/input9
ACPI: SSDT 3F6D51D9, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 3F6D4C62, 04F2 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003f2c4348 [20080321]
ACPI: SSDT 3F6D53CF, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 3F6D5154, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2])
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: device:06 is registered as cooling_device2
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
input: Video Bus as /class/input/input10
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input11
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
ACPI: LNXTHERM:01 is registered as thermal_zone0
ACPI: Thermal Zone [THRM] (54 C)
agpgart: AGP aperture is 256M @ 0xd0000000
Clocksource tsc unstable (delta = -171629671 ns)
r8169 Gigabit Ethernet driver 2.2LK loaded
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth0: RTL8101e at 0xffffc20000056000, 00:03:0d:60:b4:d1, XID 34000000 IRQ 1276
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
EXT3 FS on sda7, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
r8169: eth0: link up
r8169: eth0: link up
Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k
ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003ac33ed0 [20080321]
ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003e5879c0 [20080321]
ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003ac33ed0 [20080321]
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
[drm:i915_getparam] *ERROR* Unknown parameter 5
ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003e587df8 [20080321]
ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003e587a08 [20080321]
ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003f2c6d68 [20080321]
[drm:i915_getparam] *ERROR* Unknown parameter 5
ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003e587ae0 [20080321]
ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003ac33390 [20080321]

复制代码

cbkid · 发表于 2008-12-2 13:46:28

dmesg28

dmesg28
[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-rc6 (root@cbkidlll) (gcc version 4.3.2 (Gentoo 4.3.2 p1.2) ) #1 SMP Mon Dec 1 09:32:18 CST 2008
[ 0.000000] Command line: root=/dev/sda7 agp=try_unsupported
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6df000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6df000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3f6d0 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f6d0000
[ 0.000000] 0000000000 - 003f600000 page 2M
[ 0.000000] 003f600000 - 003f6d0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f6d0000 @ 10000-13000
[ 0.000000] last_map_addr: 3f6d0000 end: 3f6d0000
[ 0.000000] ACPI: RSDP 000F80B0, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 3F6D433A, 008C (r1 HASEE PARADISE 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3F6DBC2C, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 3F6D6252, 5966 (r2 ECS___ F43_____ 6040000 INTL 20050624)
[ 0.000000] ACPI: FACS 3F6DEFC0, 0040
[ 0.000000] ACPI: APIC 3F6DBD20, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3F6DBD88, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3F6DBDC0, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
[ 0.000000] ACPI: TMOR 3F6DBDFC, 0026 (r1 PTLTD 6040000 PTL 3)
[ 0.000000] ACPI: APIC 3F6DBE22, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: SLIC 3F6DBE8A, 0176 (r1 HASEE PARADISE 6040000 LTP 0)
[ 0.000000] ACPI: SSDT 3F6D5C03, 064F (r1 SataRe SataPri 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F6D5567, 069C (r1 SataRe SataSec 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F6D5497, 00D0 (r1 BrtRef DD01BRT 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F6D4A03, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F6D495D, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3F6D43C6, 0597 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003f6d0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003f6d0000
[ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
[ 0.000000] bootmap [0000000000016000 - 000000000001dedf] pages 8
[ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 003f6d0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000ba296c] TEXT DATA BSS ==> [0000200000 - 0000ba296c]
[ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] found SMP MP-table at [ffff8800000f80e0] 000f80e0
[ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f6d0
[ 0.000000] On node 0 totalpages: 259679
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2568 pages reserved
[ 0.000000] DMA zone: 1359 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3496 pages used for memmap
[ 0.000000] DMA32 zone: 252200 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] PERCPU: Allocating 57344 bytes of per cpu data
[ 0.000000] per cpu data for cpu0 on node0 at 000000000100a000
[ 0.000000] per cpu data for cpu1 on node0 at 0000000001018000
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 253559
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda7 agp=try_unsupported
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1463.044 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000999] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000999] Memory: 1014204k/1039168k available (4752k kernel code, 452k absent, 24512k reserved, 3151k data, 532k init)
[ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] hpet clockevent registered
[ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 2926.08 BogoMIPS (lpj=1463044)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] SELinux: Starting in permissive mode
[ 0.000999] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001814] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.002394] Mount-cache hash table entries: 256
[ 0.002769] Initializing cgroup subsys ns
[ 0.003012] Initializing cgroup subsys cpuacct
[ 0.003186] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003377] CPU: L2 cache: 1024K
[ 0.003524] CPU 0/0x0 -> Node 0
[ 0.003666] CPU: Physical Processor ID: 0
[ 0.003813] CPU: Processor Core ID: 0
[ 0.004009] CPU0: Thermal monitoring handled by SMI
[ 0.004012] using mwait in idle threads.
[ 0.004185] ACPI: Core revision 20080926
[ 0.017083] Setting APIC routing to flat
[ 0.017590] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028221] CPU0: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz stepping 0d
[ 0.028995] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 2925.86 BogoMIPS (lpj=1462932)
[ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000999] CPU: L2 cache: 1024K
[ 0.000999] CPU 1/0x1 -> Node 0
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] CPU1: Thermal monitoring enabled (TM2)
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.100355] CPU1: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz stepping 0d
[ 0.101198] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.102005] Brought up 2 CPUs
[ 0.102144] Total of 2 processors activated (5851.95 BogoMIPS).
[ 0.102391] khelper used greatest stack depth: 6000 bytes left
[ 0.103031] net_namespace: 1344 bytes
[ 0.103345] Time: 13:09:28 Date: 12/02/08
[ 0.103345] NET: Registered protocol family 16
[ 0.104024] ACPI: bus type pci registered
[ 0.104176] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.104182] PCI: MCFG area at e0000000 reserved in E820
[ 0.119356] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.119502] PCI: Using configuration type 1 for base access
[ 0.129333] ACPI: EC: Look up EC in DSDT
[ 0.133023] ACPI: BIOS _OSI(Linux) query ignored
[ 0.133174] ACPI: DMI System Vendor: HASEE
[ 0.133318] ACPI: DMI Product Name: HASEE
[ 0.133462] ACPI: DMI Product Version:
[ 0.133604] ACPI: DMI Board Name: HASEE
[ 0.133747] ACPI: DMI BIOS Vendor: Phoenix Technologies LTD
[ 0.133892] ACPI: DMI BIOS Date: 08/03/2007
[ 0.133981] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 0.134130] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 0.135163] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.139092] ACPI: Interpreter enabled
[ 0.139238] ACPI: (supports S0 S3 S4 S5)
[ 0.140117] ACPI: Using IOAPIC for interrupt routing
[ 0.148183] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.148262] ACPI: EC: driver started in interrupt mode
[ 0.149177] ACPI: No dock devices found.
[ 0.149335] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.149522] pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff]
[ 0.149522] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.149522] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.149522] pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff]
[ 0.149522] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
[ 0.149988] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
[ 0.150068] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc404000-0xfc4043ff]
[ 0.150122] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.150273] pci 0000:00:1a.7: PME# disabled
[ 0.150475] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
[ 0.150520] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.150668] pci 0000:00:1b.0: PME# disabled
[ 0.150887] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.150982] pci 0000:00:1c.0: PME# disabled
[ 0.151202] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.151349] pci 0000:00:1c.2: PME# disabled
[ 0.152055] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.152204] pci 0000:00:1c.3: PME# disabled
[ 0.152425] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
[ 0.152496] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
[ 0.152567] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
[ 0.152646] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc404400-0xfc4047ff]
[ 0.152699] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.152844] pci 0000:00:1d.7: PME# disabled
[ 0.153146] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.153382] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.153564] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.153574] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.153583] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.153592] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.153601] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.153662] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07]
[ 0.153672] pci 0000:00:1f.2: reg 14 io port: [0x18f4-0x18f7]
[ 0.153681] pci 0000:00:1f.2: reg 18 io port: [0x18f8-0x18ff]
[ 0.153690] pci 0000:00:1f.2: reg 1c io port: [0x18f0-0x18f3]
[ 0.153700] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ef]
[ 0.153709] pci 0000:00:1f.2: reg 24 io port: [0x18d0-0x18df]
[ 0.153731] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.153981] pci 0000:00:1f.2: PME# disabled
[ 0.154154] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.154182] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
[ 0.154276] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.154282] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
[ 0.154292] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.154359] pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff]
[ 0.154365] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
[ 0.154375] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
[ 0.154457] pci 0000:06:00.0: reg 10 io port: [0x4000-0x40ff]
[ 0.154488] pci 0000:06:00.0: reg 18 64bit mmio: [0xfa000000-0xfa000fff]
[ 0.154520] pci 0000:06:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.154538] pci 0000:06:00.0: supports D1 D2
[ 0.154541] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.154689] pci 0000:06:00.0: PME# disabled
[ 0.154907] pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]
[ 0.154913] pci 0000:00:1c.3: bridge 32bit mmio: [0xfa000000-0xfbffffff]
[ 0.154922] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
[ 0.155010] pci 0000:00:1e.0: transparent bridge
[ 0.155205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.155926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.156148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.156357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.156598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.156653] ACPI Warning (nspredef-0357): \_SB_.PCI0.PCIB._PRT: Return Package has no elements (empty) [20080926]
[ 0.172462] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.173763] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.174752] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.175576] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.176573] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.177575] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.178395] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.179391] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.181070] SCSI subsystem initialized
[ 0.181144] libata version 3.00 loaded.
[ 0.181144] usbcore: registered new interface driver usbfs
[ 0.181144] usbcore: registered new interface driver hub
[ 0.181999] usbcore: registered new device driver usb
[ 0.182126] dca service started, version 1.4
[ 0.182126] PCI: Using ACPI for IRQ routing
[ 0.191013] cfg80211: Using static regulatory domain info
[ 0.191137] cfg80211: Regulatory domain: US
[ 0.191277] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.191513] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.191660] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.191806] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.191973] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.192120] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.192266] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.192412] cfg80211: Calling CRDA for country: US
[ 0.192562] NetLabel: Initializing
[ 0.192562] NetLabel: domain hash size = 128
[ 0.192562] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.192989] NetLabel: unlabeled traffic allowed by default
[ 0.193160] PCI-GART: No AMD GART found.
[ 0.193313] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.193639] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.197978] pnp: PnP ACPI init
[ 0.198131] ACPI: bus type pnp registered
[ 0.199468] pnp 00:01: mem resource (0xf0401000-0xf0401fff) overlaps 0000:00:1c.0 BAR 9 (0xf0000000-0xf1ffffff), disabling
[ 0.201873] pnp: PnP ACPI: found 10 devices
[ 0.202025] ACPI: ACPI bus type pnp unregistered
[ 0.202182] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.202333] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.202487] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.202632] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.202780] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.202927] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.203081] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.203233] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.203387] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.203543] system 00:06: ioport range 0x200-0x20f has been reserved
[ 0.203691] system 00:06: ioport range 0x260-0x26f has been reserved
[ 0.203838] system 00:06: ioport range 0x300-0x30f has been reserved
[ 0.203986] system 00:06: ioport range 0x378-0x387 has been reserved
[ 0.204133] system 00:06: ioport range 0x3f0-0x3ff could not be reserved
[ 0.204282] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.204429] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.204577] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.204727] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.204871] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.205021] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.210520] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.210665] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.210813] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
[ 0.210960] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.211207] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.211355] pci 0000:00:1c.2: IO window: 0x3000-0x3fff
[ 0.211501] pci 0000:00:1c.2: MEM window: 0xf8000000-0xf9ffffff
[ 0.211648] pci 0000:00:1c.2: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[ 0.211890] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[ 0.212037] pci 0000:00:1c.3: IO window: 0x4000-0x4fff
[ 0.212185] pci 0000:00:1c.3: MEM window: 0xfa000000-0xfbffffff
[ 0.212335] pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f5ffffff
[ 0.212577] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
[ 0.212723] pci 0000:00:1e.0: IO window: disabled
[ 0.212869] pci 0000:00:1e.0: MEM window: disabled
[ 0.213017] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.213183] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.213333] pci 0000:00:1c.0: setting latency timer to 64
[ 0.213344] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.213494] pci 0000:00:1c.2: setting latency timer to 64
[ 0.213506] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.213653] pci 0000:00:1c.3: setting latency timer to 64
[ 0.213663] pci 0000:00:1e.0: setting latency timer to 64
[ 0.213668] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.213811] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.213956] bus: 02 index 0 io port: [0x2000-0x2fff]
[ 0.214104] bus: 02 index 1 mmio: [0xf6000000-0xf7ffffff]
[ 0.214249] bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff]
[ 0.214394] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.214536] bus: 04 index 0 io port: [0x3000-0x3fff]
[ 0.214678] bus: 04 index 1 mmio: [0xf8000000-0xf9ffffff]
[ 0.214825] bus: 04 index 2 mmio: [0xf2000000-0xf3ffffff]
[ 0.214970] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.215113] bus: 06 index 0 io port: [0x4000-0x4fff]
[ 0.215256] bus: 06 index 1 mmio: [0xfa000000-0xfbffffff]
[ 0.215401] bus: 06 index 2 mmio: [0xf4000000-0xf5ffffff]
[ 0.215546] bus: 06 index 3 mmio: [0x0-0x0]
[ 0.215689] bus: 08 index 0 mmio: [0x0-0x0]
[ 0.215833] bus: 08 index 1 mmio: [0x0-0x0]
[ 0.215976] bus: 08 index 2 mmio: [0x0-0x0]
[ 0.216117] bus: 08 index 3 io port: [0x00-0xffff]
[ 0.216263] bus: 08 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.216421] NET: Registered protocol family 2
[ 0.226075] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.226838] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.228559] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.229461] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.229611] TCP reno registered
[ 0.232138] NET: Registered protocol family 1
[ 0.233988] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.234584] audit: initializing netlink socket (disabled)
[ 0.234752] type=2000 audit(1228223368.233:1): initialized
[ 0.245019] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.248538] VFS: Disk quotas dquot_6.5.1
[ 0.248797] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.250010] NTFS driver 2.1.29 [Flags: R/W].
[ 0.250419] msgmni has been set to 1980
[ 0.250706] SELinux: Registering netfilter hooks
[ 0.251202] alg: No test for stdrng (krng)
[ 0.251494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.251727] io scheduler noop registered
[ 0.251867] io scheduler anticipatory registered
[ 0.252012] io scheduler deadline registered
[ 0.252308] io scheduler cfq registered (default)
[ 0.252466] pci 0000:00:02.0: Boot video device
[ 0.252478] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x1030
[ 0.252480] pci 0000:00:1a.0: Performing full reset
[ 0.252501] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.252504] pci 0000:00:1a.1: Performing full reset
[ 0.252564] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0030
[ 0.252567] pci 0000:00:1d.0: Performing full reset
[ 0.252588] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.252590] pci 0000:00:1d.1: Performing full reset
[ 0.252611] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
[ 0.252613] pci 0000:00:1d.2: Performing full reset
[ 0.255298] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.255357] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.255538] pcieport-driver 0000:00:1c.0: irq 47 for MSI/MSI-X
[ 0.255557] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.255616] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.255664] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.255788] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 0.255844] pcieport-driver 0000:00:1c.2: found MSI capability
[ 0.256021] pcieport-driver 0000:00:1c.2: irq 46 for MSI/MSI-X
[ 0.256040] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 0.256089] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 0.256138] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 0.256271] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.256327] pcieport-driver 0000:00:1c.3: found MSI capability
[ 0.256504] pcieport-driver 0000:00:1c.3: irq 45 for MSI/MSI-X
[ 0.256523] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 0.256571] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 0.256619] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 0.256815] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.257564] ACPI: AC Adapter [AC0] (on-line)
[ 0.258332] ACPI: Battery Slot [BAT0] (battery absent)
[ 0.258650] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.258876] ACPI: Power Button (FF) [PWRF]
[ 0.259130] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.259357] ACPI: Power Button (CM) [PWRB]
[ 0.259594] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.259878] ACPI: Lid Switch [LID]
[ 0.260136] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 0.260363] ACPI: Sleep Button (CM) [SLPB]
[ 0.261294] ACPI: SSDT 3F6D51D9, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 0.265426] ACPI: SSDT 3F6D4C62, 04F2 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 0.269755] Monitor-Mwait will be used to enter C-1 state
[ 0.269759] Monitor-Mwait will be used to enter C-2 state
[ 0.269833] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 0.270184] processor ACPI_CPU:00: registered as cooling_device0
[ 0.270327] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.271113] ACPI: SSDT 3F6D53CF, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 0.271872] ACPI: SSDT 3F6D5154, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 0.273460] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 0.273800] processor ACPI_CPU:01: registered as cooling_device1
[ 0.273942] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.277765] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.279005] ACPI: Thermal Zone [THRM] (55 C)
[ 0.294379] Non-volatile memory driver v1.2
[ 0.296866] Linux agpgart interface v0.103
[ 0.297024] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 0.297597] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 0.301126] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 0.301387] [drm] Initialized drm 1.1.0 20060810
[ 0.301599] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.301742] pci 0000:00:02.0: setting latency timer to 64
[ 0.301945] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 0.302116] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 0.304969] brd: module loaded
[ 0.306180] loop: module loaded
[ 0.306317] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 0.306457] Copyright (c) 1999-2006 Intel Corporation.
[ 0.306679] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 0.306830] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.307080] sky2 driver version 1.22
[ 0.307386] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.307551] r8169 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.307715] r8169 0000:06:00.0: setting latency timer to 64
[ 0.307861] r8169 0000:06:00.0: irq 44 for MSI/MSI-X
[ 0.308189] eth0: RTL8101e at 0xffffc200001fe000, 00:03:0d:60:b4:d1, XID 34000000 IRQ 44
[ 0.309415] console [netcon0] enabled
[ 0.309551] netconsole: network logging started
[ 0.309785] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 0.310029] Uniform Multi-Platform E-IDE driver
[ 0.310279] ide-gd driver 1.18
[ 0.310538] Loading iSCSI transport class v2.0-870.
[ 0.310986] Driver 'sd' needs updating - please use bus_type methods
[ 0.311169] Driver 'sr' needs updating - please use bus_type methods
[ 0.311493] ata_piix 0000:00:1f.1: version 2.12
[ 0.311507] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.311690] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.311780] scsi0 : ata_piix
[ 0.312099] scsi1 : ata_piix
[ 0.313266] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.313409] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.483259] ata1.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, CH00, max UDMA/33
[ 0.501770] Switched to high resolution mode on CPU 0
[ 0.501773] Switched to high resolution mode on CPU 1
[ 0.540436] ata1.00: configured for UDMA/33
[ 0.714447] isa bounce pool size: 16 pages
[ 0.747937] scsi 0:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D CH00 PQ: 0 ANSI: 5
[ 0.835228] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 0.835371] Uniform CD-ROM driver Revision: 3.20
[ 0.835740] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.835872] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.836120] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.836266] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.987052] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.987127] scsi2 : ata_piix
[ 0.987417] scsi3 : ata_piix
[ 0.989319] ata3: SATA max UDMA/133 cmd 0x1c00 ctl 0x18f4 bmdma 0x18e0 irq 19
[ 0.989469] ata4: SATA max UDMA/133 cmd 0x18f8 ctl 0x18f0 bmdma 0x18e8 irq 19
[ 1.750108] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.750265] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 1.753527] ata3.00: ATA-7: Hitachi HTS541610J9SA00, SBCAC7MP, max UDMA/133
[ 1.753671] ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.759548] ata3.00: configured for UDMA/133
[ 2.380415] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 2.380567] ata4.01: SATA link down (SStatus 0 SControl 0)
[ 2.380810] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54161 SBCA PQ: 0 ANSI: 5
[ 2.381283] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
[ 2.381526] sd 2:0:0:0: [sda] Write Protect is off
[ 2.381664] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.381698] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.382007] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
[ 2.382249] sd 2:0:0:0: [sda] Write Protect is off
[ 2.382388] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.382421] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.382649] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 2.869246] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.869524] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.870120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.870270] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
[ 2.870303] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.870471] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.870476] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.870692] drivers/usb/core/inode.c: creating file 'devices'
[ 2.870698] drivers/usb/core/inode.c: creating file '001'
[ 2.870768] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.870998] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
[ 2.871004] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[ 2.871030] ehci_hcd 0000:00:1a.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 2.874920] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.875063] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.875066] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
[ 2.875085] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404000
[ 2.875227] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.879119] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 2.884011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.884185] usb usb1: default language 0x0409
[ 2.884237] usb usb1: uevent
[ 2.884292] usb usb1: usb_probe_device
[ 2.884295] usb usb1: configuration #1 chosen from 1 choice
[ 2.884439] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.884459] usb 1-0:1.0: uevent
[ 2.884504] hub 1-0:1.0: usb_probe_interface
[ 2.884507] hub 1-0:1.0: usb_probe_interface - got id
[ 2.884510] hub 1-0:1.0: USB hub found
[ 2.884653] hub 1-0:1.0: 4 ports detected
[ 2.884789] hub 1-0:1.0: standalone hub
[ 2.884791] hub 1-0:1.0: no power switching (usb 1.0)
[ 2.884793] hub 1-0:1.0: individual port over-current protection
[ 2.884795] hub 1-0:1.0: power on to power good time: 20ms
[ 2.884801] hub 1-0:1.0: local power source is good
[ 2.884804] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 2.884944] drivers/usb/core/inode.c: creating file '001'
[ 2.885027] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.885169] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.885398] usb usb1: Product: EHCI Host Controller
[ 2.885536] usb usb1: Manufacturer: Linux 2.6.28-rc6 ehci_hcd
[ 2.885676] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.885843] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.886004] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.886008] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.886207] drivers/usb/core/inode.c: creating file '002'
[ 2.886281] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.886512] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
[ 2.886517] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
[ 2.886541] ehci_hcd 0000:00:1d.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[ 2.890424] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.890571] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.890573] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[ 2.890590] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404400
[ 2.890733] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.894623] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
[ 2.900010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.900187] usb usb2: default language 0x0409
[ 2.900239] usb usb2: uevent
[ 2.900294] usb usb2: usb_probe_device
[ 2.900297] usb usb2: configuration #1 chosen from 1 choice
[ 2.900442] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.900462] usb 2-0:1.0: uevent
[ 2.900505] hub 2-0:1.0: usb_probe_interface
[ 2.900507] hub 2-0:1.0: usb_probe_interface - got id
[ 2.900510] hub 2-0:1.0: USB hub found
[ 2.900652] hub 2-0:1.0: 6 ports detected
[ 2.900789] hub 2-0:1.0: standalone hub
[ 2.900791] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.900793] hub 2-0:1.0: individual port over-current protection
[ 2.900796] hub 2-0:1.0: power on to power good time: 20ms
[ 2.900801] hub 2-0:1.0: local power source is good
[ 2.900804] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.900902] drivers/usb/core/inode.c: creating file '001'
[ 2.900985] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.901127] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.901355] usb usb2: Product: EHCI Host Controller
[ 2.901495] usb usb2: Manufacturer: Linux 2.6.28-rc6 ehci_hcd
[ 2.901634] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.901829] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.901971] ohci_hcd: block sizes: ed 80 td 96
[ 2.902034] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.902226] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.902381] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.902386] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.902584] drivers/usb/core/inode.c: creating file '003'
[ 2.902662] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.902895] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 2.903038] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.903041] uhci_hcd 0000:00:1a.0: Performing full reset
[ 2.903059] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 2.903076] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 2.903265] usb usb3: default language 0x0409
[ 2.903317] usb usb3: uevent
[ 2.903363] usb usb3: usb_probe_device
[ 2.903366] usb usb3: configuration #1 chosen from 1 choice
[ 2.903509] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 2.903529] usb 3-0:1.0: uevent
[ 2.903572] hub 3-0:1.0: usb_probe_interface
[ 2.903575] hub 3-0:1.0: usb_probe_interface - got id
[ 2.903577] hub 3-0:1.0: USB hub found
[ 2.903722] hub 3-0:1.0: 2 ports detected
[ 2.903859] hub 3-0:1.0: standalone hub
[ 2.903861] hub 3-0:1.0: no power switching (usb 1.0)
[ 2.903863] hub 3-0:1.0: individual port over-current protection
[ 2.903865] hub 3-0:1.0: power on to power good time: 2ms
[ 2.903870] hub 3-0:1.0: local power source is good
[ 2.903873] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 2.903949] drivers/usb/core/inode.c: creating file '001'
[ 2.904034] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.904177] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.904407] usb usb3: Product: UHCI Host Controller
[ 2.904545] usb usb3: Manufacturer: Linux 2.6.28-rc6 uhci_hcd
[ 2.904686] usb usb3: SerialNumber: 0000:00:1a.0
[ 2.904853] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.905002] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.905006] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.905205] drivers/usb/core/inode.c: creating file '004'
[ 2.905279] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.905512] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 2.905653] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.905656] uhci_hcd 0000:00:1a.1: Performing full reset
[ 2.905675] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
[ 2.905690] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 2.905874] usb usb4: default language 0x0409
[ 2.905924] usb usb4: uevent
[ 2.905971] usb usb4: usb_probe_device
[ 2.905974] usb usb4: configuration #1 chosen from 1 choice
[ 2.906119] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 2.906139] usb 4-0:1.0: uevent
[ 2.906185] hub 4-0:1.0: usb_probe_interface
[ 2.906188] hub 4-0:1.0: usb_probe_interface - got id
[ 2.906190] hub 4-0:1.0: USB hub found
[ 2.906344] hub 4-0:1.0: 2 ports detected
[ 2.906481] hub 4-0:1.0: standalone hub
[ 2.906483] hub 4-0:1.0: no power switching (usb 1.0)
[ 2.906486] hub 4-0:1.0: individual port over-current protection
[ 2.906488] hub 4-0:1.0: power on to power good time: 2ms
[ 2.906493] hub 4-0:1.0: local power source is good
[ 2.906496] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 2.906578] drivers/usb/core/inode.c: creating file '001'
[ 2.906658] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.906800] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.907024] usb usb4: Product: UHCI Host Controller
[ 2.907162] usb usb4: Manufacturer: Linux 2.6.28-rc6 uhci_hcd
[ 2.907306] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.907474] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.907622] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.907626] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.907822] drivers/usb/core/inode.c: creating file '005'
[ 2.907903] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 2.908133] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 2.908279] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.908282] uhci_hcd 0000:00:1d.0: Performing full reset
[ 2.908301] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 2.908307] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 2.908490] usb usb5: default language 0x0409
[ 2.908538] usb usb5: uevent
[ 2.908586] usb usb5: usb_probe_device
[ 2.908589] usb usb5: configuration #1 chosen from 1 choice
[ 2.908732] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 2.908752] usb 5-0:1.0: uevent
[ 2.908795] hub 5-0:1.0: usb_probe_interface
[ 2.908798] hub 5-0:1.0: usb_probe_interface - got id
[ 2.908800] hub 5-0:1.0: USB hub found
[ 2.908942] hub 5-0:1.0: 2 ports detected
[ 2.909082] hub 5-0:1.0: standalone hub
[ 2.909083] hub 5-0:1.0: no power switching (usb 1.0)
[ 2.909086] hub 5-0:1.0: individual port over-current protection
[ 2.909088] hub 5-0:1.0: power on to power good time: 2ms
[ 2.909093] hub 5-0:1.0: local power source is good
[ 2.909096] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 2.909180] drivers/usb/core/inode.c: creating file '001'
[ 2.909266] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.909409] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.909633] usb usb5: Product: UHCI Host Controller
[ 2.909770] usb usb5: Manufacturer: Linux 2.6.28-rc6 uhci_hcd
[ 2.909910] usb usb5: SerialNumber: 0000:00:1d.0
[ 2.910072] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.910221] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.910225] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.910431] drivers/usb/core/inode.c: creating file '006'
[ 2.910501] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 2.910731] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 2.910873] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.910876] uhci_hcd 0000:00:1d.1: Performing full reset
[ 2.910894] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[ 2.910901] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 2.911085] usb usb6: default language 0x0409
[ 2.911133] usb usb6: uevent
[ 2.911179] usb usb6: usb_probe_device
[ 2.911182] usb usb6: configuration #1 chosen from 1 choice
[ 2.911331] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 2.911355] usb 6-0:1.0: uevent
[ 2.911399] hub 6-0:1.0: usb_probe_interface
[ 2.911402] hub 6-0:1.0: usb_probe_interface - got id
[ 2.911404] hub 6-0:1.0: USB hub found
[ 2.911546] hub 6-0:1.0: 2 ports detected
[ 2.911683] hub 6-0:1.0: standalone hub
[ 2.911684] hub 6-0:1.0: no power switching (usb 1.0)
[ 2.911687] hub 6-0:1.0: individual port over-current protection
[ 2.911689] hub 6-0:1.0: power on to power good time: 2ms
[ 2.911694] hub 6-0:1.0: local power source is good
[ 2.911697] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 2.911771] drivers/usb/core/inode.c: creating file '001'
[ 2.911851] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.911992] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.912217] usb usb6: Product: UHCI Host Controller
[ 2.912359] usb usb6: Manufacturer: Linux 2.6.28-rc6 uhci_hcd
[ 2.912498] usb usb6: SerialNumber: 0000:00:1d.1
[ 2.912662] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.912810] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.912814] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.913027] drivers/usb/core/inode.c: creating file '007'
[ 2.913105] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 2.913342] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 2.913483] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.913485] uhci_hcd 0000:00:1d.2: Performing full reset
[ 2.913504] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[ 2.913510] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 2.913692] usb usb7: default language 0x0409
[ 2.913743] usb usb7: uevent
[ 2.913791] usb usb7: usb_probe_device
[ 2.913794] usb usb7: configuration #1 chosen from 1 choice
[ 2.913937] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 2.913957] usb 7-0:1.0: uevent
[ 2.914002] hub 7-0:1.0: usb_probe_interface
[ 2.914004] hub 7-0:1.0: usb_probe_interface - got id
[ 2.914007] hub 7-0:1.0: USB hub found
[ 2.914150] hub 7-0:1.0: 2 ports detected
[ 2.914290] hub 7-0:1.0: standalone hub
[ 2.914292] hub 7-0:1.0: no power switching (usb 1.0)
[ 2.914294] hub 7-0:1.0: individual port over-current protection
[ 2.914297] hub 7-0:1.0: power on to power good time: 2ms
[ 2.914302] hub 7-0:1.0: local power source is good
[ 2.914305] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 2.914387] drivers/usb/core/inode.c: creating file '001'
[ 2.914479] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.914620] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.914844] usb usb7: Product: UHCI Host Controller
[ 2.914982] usb usb7: Manufacturer: Linux 2.6.28-rc6 uhci_hcd
[ 2.915122] usb usb7: SerialNumber: 0000:00:1d.2
[ 2.915389] usbcore: registered new interface driver usblp
[ 2.917872] Initializing USB Mass Storage driver...
[ 2.918085] usbcore: registered new interface driver usb-storage
[ 2.918226] USB Mass Storage support registered.
[ 2.918447] usbcore: registered new interface driver libusual
[ 2.918704] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.923506] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.926540] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.926683] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.926829] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.926972] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.927117] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.932067] mice: PS/2 mouse device common for all mice
[ 2.947337] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.947513] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.947733] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.947960] ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI region SMBI [0x1c20-0x1c2f]
[ 2.948193] ACPI: Device needs an ACPI driver
[ 2.948661] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.949217] cpuidle: using governor ladder
[ 2.949861] cpuidle: using governor menu
[ 2.950023] No iBFT detected.
[ 2.950254] Marking TSC unstable due to TSC halts in idle
[ 2.952110] usbcore: registered new interface driver hiddev
[ 2.952339] usbcore: registered new interface driver usbhid
[ 2.952480] usbhid: v2.6:USB HID core driver
[ 2.952708] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
[ 2.953463] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.953741] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 2.963412] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 2.980016] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.984293] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
[ 2.984299] hub 1-0:1.0: port 1: status 0501 change 0001
[ 2.991177] ALSA device list:
[ 2.991335] #0: HDA Intel at 0xfc400000 irq 22
[ 2.991614] Netfilter messages via NETLINK v0.30.
[ 2.991771] nf_conntrack version 0.5.0 (8118 buckets, 32472 max)
[ 2.992266] ctnetlink v0.93: registering with nfnetlink.
[ 2.993186] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.993370] TCP cubic registered
[ 2.993508] Initializing XFRM netlink socket
[ 2.993804] NET: Registered protocol family 10
[ 2.995214] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.995449] IPv6 over IPv4 tunneling driver
[ 2.996454] NET: Registered protocol family 17
[ 2.996899] RPC: Registered udp transport module.
[ 2.997061] RPC: Registered tcp transport module.
[ 2.998169] registered taskstats version 1
[ 2.998495] Magic number: 4:181:179
[ 2.998712] acpi device:0f: hash matches
[ 3.000303] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
[ 3.000309] hub 2-0:1.0: port 1: status 0501 change 0001
[ 3.003287] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00
[ 3.006056] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.009042] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
[ 3.011051] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.014051] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 3.084050] hub 1-0:1.0: state 7 ports 4 chg 0002 evt 0000
[ 3.084057] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 3.084067] ehci_hcd 0000:00:1a.7: port 1 low speed --> companion
[ 3.135038] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
[ 3.135061] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002
[ 3.135068] hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000
[ 3.135075] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 3.135081] ehci_hcd 0000:00:1d.7: port 1 low speed --> companion
[ 3.186040] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
[ 3.186061] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 3.186069] uhci_hcd 0000:00:1a.0: port 1 portsc 01a3,00
[ 3.186077] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
[ 3.290050] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
[ 3.392294] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 3.538278] usb 3-1: skipped 1 descriptor after interface
[ 3.538282] usb 3-1: skipped 1 descriptor after interface
[ 3.538339] usb 3-1: uevent
[ 3.538454] usb 3-1: usb_probe_device
[ 3.538457] usb 3-1: configuration #1 chosen from 1 choice
[ 3.541279] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 3.541305] usb 3-1:1.0: uevent
[ 3.541387] usbhid 3-1:1.0: usb_probe_interface
[ 3.541389] usbhid 3-1:1.0: usb_probe_interface - got id
[ 3.554708] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input6
[ 3.558042] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[ 3.561237] generic-usb 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1a.0-1/input0
[ 3.561600] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
[ 3.561627] usb 3-1:1.1: uevent
[ 3.561720] usbhid 3-1:1.1: usb_probe_interface
[ 3.561722] usbhid 3-1:1.1: usb_probe_interface - got id
[ 3.582492] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input7
[ 3.586284] uhci_hcd 0000:00:1a.0: reserve dev 2 ep82-INT, period 8, phase 4, 87 us
[ 3.589446] generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1a.0-1/input1
[ 3.589780] drivers/usb/core/inode.c: creating file '002'
[ 3.589894] usb 3-1: New USB device found, idVendor=04f3, idProduct=0103
[ 3.590053] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.590197] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
[ 3.590209] uhci_hcd 0000:00:1d.0: port 1 portsc 01a3,00
[ 3.590219] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
[ 3.694041] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
[ 3.796044] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 3.903264] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input8
[ 3.937509] usb 5-1: skipped 1 descriptor after interface
[ 3.942505] usb 5-1: default language 0x0409
[ 3.949552] usb 5-1: uevent
[ 3.949624] usb 5-1: usb_probe_device
[ 3.949628] usb 5-1: configuration #1 chosen from 1 choice
[ 3.952506] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
[ 3.952530] usb 5-1:1.0: uevent
[ 3.952637] usbhid 5-1:1.0: usb_probe_interface
[ 3.952640] usbhid 5-1:1.0: usb_probe_interface - got id
[ 3.954288] usb usb4: suspend_rh (auto-stop)
[ 3.954317] usb usb6: suspend_rh (auto-stop)
[ 3.954345] usb usb7: suspend_rh (auto-stop)
[ 3.965855] input: USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input9
[ 3.973434] generic-usb 0003:15D9:0A37.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-1/input0
[ 3.973771] drivers/usb/core/inode.c: creating file '002'
[ 3.973885] usb 5-1: New USB device found, idVendor=15d9, idProduct=0a37
[ 3.974042] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.974184] usb 5-1: Product: USB Mouse
[ 3.974333] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
[ 4.008064] md: Waiting for all devices to be available before autodetect
[ 4.008206] md: If you don't use raid, use raid=noautodetect
[ 4.008608] md: Autodetecting RAID arrays.
[ 4.008747] md: Scanned 0 and added 0 devices.
[ 4.008883] md: autorun ...
[ 4.009022] md: ... autorun DONE.
[ 4.035818] kjournald starting. Commit interval 5 seconds
[ 4.035978] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.036130] VFS: Mounted root (ext3 filesystem) readonly.
[ 4.036299] Freeing unused kernel memory: 532k freed
[ 4.036714] Write protecting the kernel read-only data: 7060k
[ 4.101621] khelper used greatest stack depth: 5504 bytes left
[ 4.931088] init-early.sh used greatest stack depth: 3912 bytes left
[ 5.036594] mount used greatest stack depth: 3720 bytes left
[ 5.701046] hub 4-0:1.0: hub_suspend
[ 5.701057] usb usb4: bus auto-suspend
[ 5.701060] usb usb4: suspend_rh
[ 5.701080] hub 6-0:1.0: hub_suspend
[ 5.701085] usb usb6: bus auto-suspend
[ 5.701087] usb usb6: suspend_rh
[ 5.701105] hub 7-0:1.0: hub_suspend
[ 5.701109] usb usb7: bus auto-suspend
[ 5.701111] usb usb7: suspend_rh
[ 5.701129] hub 1-0:1.0: hub_suspend
[ 5.701133] usb usb1: bus auto-suspend
[ 5.701136] ehci_hcd 0000:00:1a.7: suspend root hub
[ 5.977453] usb usb3: uevent
[ 5.977480] usb 3-0:1.0: uevent
[ 5.977528] usb 3-1: uevent
[ 5.977552] usb 3-1:1.0: uevent
[ 5.977691] usb 3-1:1.1: uevent
[ 5.977931] usb usb4: uevent
[ 5.977955] usb 4-0:1.0: uevent
[ 5.978109] usb usb1: uevent
[ 5.978132] usb 1-0:1.0: uevent
[ 5.978807] usb usb5: uevent
[ 5.978830] usb 5-0:1.0: uevent
[ 5.978877] usb 5-1: uevent
[ 5.978900] usb 5-1:1.0: uevent
[ 5.979165] usb usb6: uevent
[ 5.979187] usb 6-0:1.0: uevent
[ 5.979313] usb usb7: uevent
[ 5.979336] usb 7-0:1.0: uevent
[ 5.979459] usb usb2: uevent
[ 5.979485] usb 2-0:1.0: uevent
[ 6.701288] hub 2-0:1.0: hub_suspend
[ 6.701298] usb usb2: bus auto-suspend
[ 6.701301] ehci_hcd 0000:00:1d.7: suspend root hub
[ 71.439810] EXT3 FS on sda7, internal journal
[ 71.703618] kjournald starting. Commit interval 5 seconds
[ 71.714161] EXT3 FS on sda1, internal journal
[ 71.714168] EXT3-fs: mounted filesystem with ordered data mode.
[ 71.802609] kjournald starting. Commit interval 5 seconds
[ 71.802855] EXT3 FS on sda8, internal journal
[ 71.802860] EXT3-fs: mounted filesystem with ordered data mode.
[ 71.832332] kjournald starting. Commit interval 5 seconds
[ 71.832565] EXT3 FS on sda6, internal journal
[ 71.832569] EXT3-fs: mounted filesystem with ordered data mode.
[ 74.129070] r8169: eth0: link up
[ 74.129080] r8169: eth0: link up
[ 74.413491] Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k
[ 75.586993] usb usb3: uevent
[ 75.587076] usb 3-0:1.0: uevent
[ 75.587203] usb 3-1: uevent
[ 75.587617] usb 3-1:1.0: uevent
[ 75.588010] usb 3-1:1.1: uevent
[ 75.588900] usb usb4: uevent
[ 75.588976] usb 4-0:1.0: uevent
[ 75.589579] usb usb1: uevent
[ 75.589657] usb 1-0:1.0: uevent
[ 75.591678] usb usb5: uevent
[ 75.591756] usb 5-0:1.0: uevent
[ 75.591883] usb 5-1: uevent
[ 75.591959] usb 5-1:1.0: uevent
[ 75.593065] usb usb6: uevent
[ 75.593142] usb 6-0:1.0: uevent
[ 75.593698] usb usb7: uevent
[ 75.593774] usb 7-0:1.0: uevent
[ 75.594112] usb usb2: uevent
[ 75.594187] usb 2-0:1.0: uevent
[ 81.367312] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
[ 81.377520] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 93 us
[ 81.447307] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
[ 84.447277] eth0: no IPv6 routers present

复制代码

cbkid · 发表于 2008-12-2 13:48:43

26从开机到关机的/var/log/messages

Dec 2 13:13:30 cbkidlll syslog-ng[14885]: syslog-ng starting up; version='2.0.9'
Dec 2 13:13:30 cbkidlll Initializing cgroup subsys cpuset
Dec 2 13:13:30 cbkidlll Linux version 2.6.26-gentoo-r3 (root@cbkidlll) (gcc version 4.3.2 (Gentoo 4.3.2 p1.2) ) #3 SMP Sat Nov 29 16:40:54 CST 2008
Dec 2 13:13:30 cbkidlll Command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda7 agp=try_unsupported
Dec 2 13:13:30 cbkidlll BIOS-provided physical RAM map:
Dec 2 13:13:30 cbkidlll BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Dec 2 13:13:30 cbkidlll BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Dec 2 13:13:30 cbkidlll BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Dec 2 13:13:30 cbkidlll BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
Dec 2 13:13:30 cbkidlll BIOS-e820: 000000003f6d0000 - 000000003f6df000 (ACPI NVS)
Dec 2 13:13:30 cbkidlll BIOS-e820: 000000003f6df000 - 0000000040000000 (reserved)
Dec 2 13:13:30 cbkidlll BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Dec 2 13:13:30 cbkidlll BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Dec 2 13:13:30 cbkidlll BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Dec 2 13:13:30 cbkidlll BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Dec 2 13:13:30 cbkidlll BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Dec 2 13:13:30 cbkidlll BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Dec 2 13:13:30 cbkidlll BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Dec 2 13:13:30 cbkidlll Entering add_active_range(0, 0, 159) 0 entries of 256 used
Dec 2 13:13:30 cbkidlll Entering add_active_range(0, 256, 259792) 1 entries of 256 used
Dec 2 13:13:30 cbkidlll max_pfn_mapped = 1048576
Dec 2 13:13:30 cbkidlll init_memory_mapping
Dec 2 13:13:30 cbkidlll DMI present.
Dec 2 13:13:30 cbkidlll ACPI: RSDP 000F80B0, 0024 (r2 PTLTD )
Dec 2 13:13:30 cbkidlll ACPI: XSDT 3F6D433A, 008C (r1 HASEE PARADISE 6040000 LTP 0)
Dec 2 13:13:30 cbkidlll ACPI: FACP 3F6DBC2C, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
Dec 2 13:13:30 cbkidlll ACPI: DSDT 3F6D6252, 5966 (r2 ECS___ F43_____ 6040000 INTL 20050624)
Dec 2 13:13:30 cbkidlll ACPI: FACS 3F6DEFC0, 0040
Dec 2 13:13:30 cbkidlll ACPI: APIC 3F6DBD20, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Dec 2 13:13:30 cbkidlll ACPI: HPET 3F6DBD88, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Dec 2 13:13:30 cbkidlll ACPI: MCFG 3F6DBDC0, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Dec 2 13:13:30 cbkidlll ACPI: TMOR 3F6DBDFC, 0026 (r1 PTLTD 6040000 PTL 3)
Dec 2 13:13:30 cbkidlll ACPI: APIC 3F6DBE22, 0068 (r1 PTLTD APIC 6040000 LTP 0)
Dec 2 13:13:30 cbkidlll ACPI: SLIC 3F6DBE8A, 0176 (r1 HASEE PARADISE 6040000 LTP 0)
Dec 2 13:13:30 cbkidlll ACPI: SSDT 3F6D5C03, 064F (r1 SataRe SataPri 1000 INTL 20050624)
Dec 2 13:13:30 cbkidlll ACPI: SSDT 3F6D5567, 069C (r1 SataRe SataSec 1000 INTL 20050624)
Dec 2 13:13:30 cbkidlll ACPI: SSDT 3F6D5497, 00D0 (r1 BrtRef DD01BRT 1000 INTL 20050624)
Dec 2 13:13:30 cbkidlll ACPI: SSDT 3F6D4A03, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
Dec 2 13:13:30 cbkidlll ACPI: SSDT 3F6D495D, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
Dec 2 13:13:30 cbkidlll ACPI: SSDT 3F6D43C6, 0597 (r1 PmRef CpuPm 3000 INTL 20050624)
Dec 2 13:13:30 cbkidlll ACPI: BIOS bug: multiple APIC/MADT found, using 0
Dec 2 13:13:30 cbkidlll ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
Dec 2 13:13:30 cbkidlll Entering add_active_range(0, 0, 159) 0 entries of 256 used
Dec 2 13:13:30 cbkidlll Entering add_active_range(0, 256, 259792) 1 entries of 256 used
Dec 2 13:13:30 cbkidlll early res: 0 [0-fff] BIOS data page
Dec 2 13:13:30 cbkidlll early res: 1 [6000-7fff] TRAMPOLINE
Dec 2 13:13:30 cbkidlll early res: 2 [200000-80d3a7] TEXT DATA BSS
Dec 2 13:13:30 cbkidlll early res: 3 [36b95000-37fef2b5] RAMDISK
Dec 2 13:13:30 cbkidlll early res: 4 [9f800-fffff] BIOS reserved
Dec 2 13:13:30 cbkidlll early res: 5 [8000-afff] PGTABLE
Dec 2 13:13:30 cbkidlll [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff810001200000-ffff810001ffffff] on node 0
Dec 2 13:13:30 cbkidlll Zone PFN ranges:
Dec 2 13:13:30 cbkidlll DMA 0 -> 4096
Dec 2 13:13:30 cbkidlll DMA32 4096 -> 1048576
Dec 2 13:13:30 cbkidlll Normal 1048576 -> 1048576
Dec 2 13:13:30 cbkidlll Movable zone start PFN for each node
Dec 2 13:13:30 cbkidlll early_node_map[2] active PFN ranges
Dec 2 13:13:30 cbkidlll 0: 0 -> 159
Dec 2 13:13:30 cbkidlll 0: 256 -> 259792
Dec 2 13:13:30 cbkidlll On node 0 totalpages: 259695
Dec 2 13:13:30 cbkidlll DMA zone: 56 pages used for memmap
Dec 2 13:13:30 cbkidlll DMA zone: 1653 pages reserved
Dec 2 13:13:30 cbkidlll DMA zone: 2290 pages, LIFO batch:0
Dec 2 13:13:30 cbkidlll DMA32 zone: 3496 pages used for memmap
Dec 2 13:13:30 cbkidlll DMA32 zone: 252200 pages, LIFO batch:31
Dec 2 13:13:30 cbkidlll Normal zone: 0 pages used for memmap
Dec 2 13:13:30 cbkidlll Movable zone: 0 pages used for memmap
Dec 2 13:13:30 cbkidlll ACPI: PM-Timer IO Port: 0x1008
Dec 2 13:13:30 cbkidlll ACPI: Local APIC address 0xfee00000
Dec 2 13:13:30 cbkidlll ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Dec 2 13:13:30 cbkidlll ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Dec 2 13:13:30 cbkidlll ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Dec 2 13:13:30 cbkidlll ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Dec 2 13:13:30 cbkidlll ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Dec 2 13:13:30 cbkidlll IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
Dec 2 13:13:30 cbkidlll ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Dec 2 13:13:30 cbkidlll ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Dec 2 13:13:30 cbkidlll ACPI: IRQ0 used by override.
Dec 2 13:13:30 cbkidlll ACPI: IRQ2 used by override.
Dec 2 13:13:30 cbkidlll ACPI: IRQ9 used by override.
Dec 2 13:13:30 cbkidlll Setting APIC routing to flat
Dec 2 13:13:30 cbkidlll ACPI: HPET id: 0x8086a201 base: 0xfed00000
Dec 2 13:13:30 cbkidlll Using ACPI (MADT) for SMP configuration information
Dec 2 13:13:30 cbkidlll PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Dec 2 13:13:30 cbkidlll PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Dec 2 13:13:30 cbkidlll PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Dec 2 13:13:30 cbkidlll Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Dec 2 13:13:30 cbkidlll SMP: Allowing 2 CPUs, 0 hotplug CPUs
Dec 2 13:13:30 cbkidlll PERCPU: Allocating 35632 bytes of per cpu data
Dec 2 13:13:30 cbkidlll NR_CPUS: 32, nr_cpu_ids: 2
Dec 2 13:13:30 cbkidlll Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254490
Dec 2 13:13:30 cbkidlll Kernel command line: root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/sda7 agp=try_unsupported
Dec 2 13:13:30 cbkidlll Initializing CPU#0
Dec 2 13:13:30 cbkidlll PID hash table entries: 4096 (order: 12, 32768 bytes)
Dec 2 13:13:30 cbkidlll Extended CMOS year: 2000
Dec 2 13:13:30 cbkidlll TSC calibrated against PM_TIMER
Dec 2 13:13:30 cbkidlll time.c: Detected 1462.983 MHz processor.
Dec 2 13:13:30 cbkidlll Console: colour VGA+ 80x25
Dec 2 13:13:30 cbkidlll console [tty0] enabled
Dec 2 13:13:30 cbkidlll Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Dec 2 13:13:30 cbkidlll Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Dec 2 13:13:30 cbkidlll Checking aperture...
Dec 2 13:13:30 cbkidlll Calgary: detecting Calgary via BIOS EBDA area
Dec 2 13:13:30 cbkidlll Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Dec 2 13:13:30 cbkidlll Memory: 995088k/1039168k available (3798k kernel code, 43136k reserved, 1127k data, 280k init)
Dec 2 13:13:30 cbkidlll CPA: page pool initialized 1 of 1 pages preallocated
Dec 2 13:13:30 cbkidlll hpet clockevent registered
Dec 2 13:13:30 cbkidlll Calibrating delay using timer specific routine.. 2929.09 BogoMIPS (lpj=14645459)
Dec 2 13:13:30 cbkidlll Mount-cache hash table entries: 256
Dec 2 13:13:30 cbkidlll Initializing cgroup subsys ns
Dec 2 13:13:30 cbkidlll Initializing cgroup subsys cpuacct
Dec 2 13:13:30 cbkidlll CPU: L1 I cache: 32K, L1 D cache: 32K
Dec 2 13:13:30 cbkidlll CPU: L2 cache: 1024K
Dec 2 13:13:30 cbkidlll CPU: Physical Processor ID: 0
Dec 2 13:13:30 cbkidlll CPU: Processor Core ID: 0
Dec 2 13:13:30 cbkidlll CPU0: Thermal monitoring handled by SMI
Dec 2 13:13:30 cbkidlll using mwait in idle threads.
Dec 2 13:13:30 cbkidlll ACPI: Core revision 20080321
Dec 2 13:13:30 cbkidlll CPU0: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz stepping 0d
Dec 2 13:13:30 cbkidlll Using local APIC timer interrupts.
Dec 2 13:13:30 cbkidlll APIC timer calibration result 8312403
Dec 2 13:13:30 cbkidlll Detected 8.312 MHz APIC timer.
Dec 2 13:13:30 cbkidlll Booting processor 1/1 ip 6000
Dec 2 13:13:30 cbkidlll Initializing CPU#1
Dec 2 13:13:30 cbkidlll Calibrating delay using timer specific routine.. 2926.00 BogoMIPS (lpj=14630017)
Dec 2 13:13:30 cbkidlll CPU: L1 I cache: 32K, L1 D cache: 32K
Dec 2 13:13:30 cbkidlll CPU: L2 cache: 1024K
Dec 2 13:13:30 cbkidlll CPU: Physical Processor ID: 0
Dec 2 13:13:30 cbkidlll CPU: Processor Core ID: 1
Dec 2 13:13:30 cbkidlll CPU1: Thermal monitoring enabled (TM2)
Dec 2 13:13:30 cbkidlll CPU1: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz stepping 0d
Dec 2 13:13:30 cbkidlll checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Dec 2 13:13:30 cbkidlll Brought up 2 CPUs
Dec 2 13:13:30 cbkidlll Total of 2 processors activated (5855.09 BogoMIPS).
Dec 2 13:13:30 cbkidlll net_namespace: 1176 bytes
Dec 2 13:13:30 cbkidlll NET: Registered protocol family 16
Dec 2 13:13:30 cbkidlll ACPI: bus type pci registered
Dec 2 13:13:30 cbkidlll PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Dec 2 13:13:30 cbkidlll PCI: MCFG area at e0000000 reserved in E820
Dec 2 13:13:30 cbkidlll PCI: Using MMCONFIG at e0000000 - efffffff
Dec 2 13:13:30 cbkidlll PCI: Using configuration type 1 for base access
Dec 2 13:13:30 cbkidlll ACPI: EC: Look up EC in DSDT
Dec 2 13:13:30 cbkidlll ACPI: BIOS _OSI(Linux) query ignored
Dec 2 13:13:30 cbkidlll ACPI: DMI System Vendor: HASEE
Dec 2 13:13:30 cbkidlll ACPI: DMI Product Name: HASEE
Dec 2 13:13:30 cbkidlll ACPI: DMI Product Version:
Dec 2 13:13:30 cbkidlll ACPI: DMI Board Name: HASEE
Dec 2 13:13:30 cbkidlll ACPI: DMI BIOS Vendor: Phoenix Technologies LTD
Dec 2 13:13:30 cbkidlll ACPI: DMI BIOS Date: 08/03/2007
Dec 2 13:13:30 cbkidlll ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
Dec 2 13:13:30 cbkidlll ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
Dec 2 13:13:30 cbkidlll ACPI: Interpreter enabled
Dec 2 13:13:30 cbkidlll ACPI: (supports S0 S3 S4 S5)
Dec 2 13:13:30 cbkidlll ACPI: Using IOAPIC for interrupt routing
Dec 2 13:13:30 cbkidlll ACPI: EC: non-query interrupt received, switching to interrupt mode
Dec 2 13:13:30 cbkidlll ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
Dec 2 13:13:30 cbkidlll ACPI: EC: driver started in interrupt mode
Dec 2 13:13:30 cbkidlll ACPI: PCI Root Bridge [PCI0] (0000:00)
Dec 2 13:13:30 cbkidlll pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Dec 2 13:13:30 cbkidlll pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
Dec 2 13:13:30 cbkidlll PCI: Transparent bridge - 0000:00:1e.0
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Dec 2 13:13:30 cbkidlll Linux Plug and Play Support v0.97 (c) Adam Belay
Dec 2 13:13:30 cbkidlll pnp: PnP ACPI init
Dec 2 13:13:30 cbkidlll ACPI: bus type pnp registered
Dec 2 13:13:30 cbkidlll pnp 00:01: mem resource (0xf0401000-0xf0401fff) overlaps 0000:00:1c.0 BAR 9 (0xf0000000-0xf1ffffff), disabling
Dec 2 13:13:30 cbkidlll pnp: PnP ACPI: found 10 devices
Dec 2 13:13:30 cbkidlll ACPI: ACPI bus type pnp unregistered
Dec 2 13:13:30 cbkidlll SCSI subsystem initialized
Dec 2 13:13:30 cbkidlll PCI: Using ACPI for IRQ routing
Dec 2 13:13:30 cbkidlll DMAR:parse DMAR table failure.
Dec 2 13:13:30 cbkidlll PCI-GART: No AMD northbridge found.
Dec 2 13:13:30 cbkidlll Switched to high resolution mode on CPU 0
Dec 2 13:13:30 cbkidlll Switched to high resolution mode on CPU 1
Dec 2 13:13:30 cbkidlll system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
Dec 2 13:13:30 cbkidlll system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
Dec 2 13:13:30 cbkidlll system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
Dec 2 13:13:30 cbkidlll system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
Dec 2 13:13:30 cbkidlll system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
Dec 2 13:13:30 cbkidlll system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
Dec 2 13:13:30 cbkidlll system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
Dec 2 13:13:30 cbkidlll system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
Dec 2 13:13:30 cbkidlll system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
Dec 2 13:13:30 cbkidlll system 00:06: ioport range 0x200-0x20f has been reserved
Dec 2 13:13:30 cbkidlll system 00:06: ioport range 0x260-0x26f has been reserved
Dec 2 13:13:30 cbkidlll system 00:06: ioport range 0x300-0x30f has been reserved
Dec 2 13:13:30 cbkidlll system 00:06: ioport range 0x378-0x387 has been reserved
Dec 2 13:13:30 cbkidlll system 00:06: ioport range 0x3f0-0x3ff could not be reserved
Dec 2 13:13:30 cbkidlll system 00:06: ioport range 0x680-0x69f has been reserved
Dec 2 13:13:30 cbkidlll system 00:06: ioport range 0x800-0x80f has been reserved
Dec 2 13:13:30 cbkidlll system 00:06: ioport range 0x1000-0x107f has been reserved
Dec 2 13:13:30 cbkidlll system 00:06: ioport range 0x1180-0x11bf has been reserved
Dec 2 13:13:30 cbkidlll system 00:06: ioport range 0x1640-0x164f has been reserved
Dec 2 13:13:30 cbkidlll system 00:06: ioport range 0xfe00-0xfe00 has been reserved
Dec 2 13:13:30 cbkidlll PCI: Bridge: 0000:00:1c.0
Dec 2 13:13:30 cbkidlll IO window: 2000-2fff
Dec 2 13:13:30 cbkidlll MEM window: 0xf6000000-0xf7ffffff
Dec 2 13:13:30 cbkidlll PREFETCH window: 0x00000000f0000000-0x00000000f1ffffff
Dec 2 13:13:30 cbkidlll PCI: Bridge: 0000:00:1c.2
Dec 2 13:13:30 cbkidlll IO window: 3000-3fff
Dec 2 13:13:30 cbkidlll MEM window: 0xf8000000-0xf9ffffff
Dec 2 13:13:30 cbkidlll PREFETCH window: 0x00000000f2000000-0x00000000f3ffffff
Dec 2 13:13:30 cbkidlll PCI: Bridge: 0000:00:1c.3
Dec 2 13:13:30 cbkidlll IO window: 4000-4fff
Dec 2 13:13:30 cbkidlll MEM window: 0xfa000000-0xfbffffff
Dec 2 13:13:30 cbkidlll PREFETCH window: 0x00000000f4000000-0x00000000f5ffffff
Dec 2 13:13:30 cbkidlll PCI: Bridge: 0000:00:1e.0
Dec 2 13:13:30 cbkidlll IO window: disabled.
Dec 2 13:13:30 cbkidlll MEM window: disabled.
Dec 2 13:13:30 cbkidlll PREFETCH window: disabled.
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1c.0 to 64
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1c.2 to 64
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1c.3 to 64
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1e.0 to 64
Dec 2 13:13:30 cbkidlll NET: Registered protocol family 2
Dec 2 13:13:30 cbkidlll IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
Dec 2 13:13:30 cbkidlll TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Dec 2 13:13:30 cbkidlll TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Dec 2 13:13:30 cbkidlll TCP: Hash tables configured (established 131072 bind 65536)
Dec 2 13:13:30 cbkidlll TCP reno registered
Dec 2 13:13:30 cbkidlll NET: Registered protocol family 1
Dec 2 13:13:30 cbkidlll checking if image is initramfs... it is
Dec 2 13:13:30 cbkidlll Freeing initrd memory: 20840k freed
Dec 2 13:13:30 cbkidlll audit: initializing netlink socket (disabled)
Dec 2 13:13:30 cbkidlll type=2000 audit(1228223582.392:1): initialized
Dec 2 13:13:30 cbkidlll squashfs: version 3.3 (2007/10/31) Phillip Lougher
Dec 2 13:13:30 cbkidlll SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Dec 2 13:13:30 cbkidlll SGI XFS Quota Management subsystem
Dec 2 13:13:30 cbkidlll OCFS2 1.5.0
Dec 2 13:13:30 cbkidlll ocfs2: Registered cluster interface o2cb
Dec 2 13:13:30 cbkidlll OCFS2 Node Manager 1.5.0
Dec 2 13:13:30 cbkidlll OCFS2 DLM 1.5.0
Dec 2 13:13:30 cbkidlll OCFS2 DLMFS 1.5.0
Dec 2 13:13:30 cbkidlll OCFS2 User DLM kernel interface loaded
Dec 2 13:13:30 cbkidlll GFS2 (built Nov 28 2008 14:13:09) installed
Dec 2 13:13:30 cbkidlll Lock_Nolock (built Nov 28 2008 14:13:21) installed
Dec 2 13:13:30 cbkidlll msgmni has been set to 1985
Dec 2 13:13:30 cbkidlll Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
Dec 2 13:13:30 cbkidlll io scheduler noop registered
Dec 2 13:13:30 cbkidlll io scheduler anticipatory registered (default)
Dec 2 13:13:30 cbkidlll io scheduler deadline registered
Dec 2 13:13:30 cbkidlll io scheduler cfq registered
Dec 2 13:13:30 cbkidlll pci 0000:00:02.0: Boot video device
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1c.0 to 64
Dec 2 13:13:30 cbkidlll assign_interrupt_mode Found MSI capability
Dec 2 13:13:30 cbkidlll Allocate Port Service[0000:00:1c.0:pcie00]
Dec 2 13:13:30 cbkidlll Allocate Port Service[0000:00:1c.0:pcie02]
Dec 2 13:13:30 cbkidlll Allocate Port Service[0000:00:1c.0:pcie03]
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1c.2 to 64
Dec 2 13:13:30 cbkidlll assign_interrupt_mode Found MSI capability
Dec 2 13:13:30 cbkidlll Allocate Port Service[0000:00:1c.2:pcie00]
Dec 2 13:13:30 cbkidlll Allocate Port Service[0000:00:1c.2:pcie02]
Dec 2 13:13:30 cbkidlll Allocate Port Service[0000:00:1c.2:pcie03]
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1c.3 to 64
Dec 2 13:13:30 cbkidlll assign_interrupt_mode Found MSI capability
Dec 2 13:13:30 cbkidlll Allocate Port Service[0000:00:1c.3:pcie00]
Dec 2 13:13:30 cbkidlll Allocate Port Service[0000:00:1c.3:pcie02]
Dec 2 13:13:30 cbkidlll Allocate Port Service[0000:00:1c.3:pcie03]
Dec 2 13:13:30 cbkidlll Linux agpgart interface v0.103
Dec 2 13:13:30 cbkidlll ACPI: AC Adapter [AC0] (on-line)
Dec 2 13:13:30 cbkidlll ACPI: Battery Slot [BAT0] (battery absent)
Dec 2 13:13:30 cbkidlll Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Dec 2 13:13:30 cbkidlll brd: module loaded
Dec 2 13:13:30 cbkidlll loop: module loaded
Dec 2 13:13:30 cbkidlll input: Macintosh mouse button emulation as /class/input/input0
Dec 2 13:13:30 cbkidlll Uniform Multi-Platform E-IDE driver
Dec 2 13:13:30 cbkidlll ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Dec 2 13:13:30 cbkidlll ICH8M: IDE controller (0x8086:0x2850 rev 0x03) at PCI slot 0000:00:1f.1
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:13:30 cbkidlll ICH8M: not 100% native mode: will probe irqs later
Dec 2 13:13:30 cbkidlll ide0: BM-DMA at 0x1810-0x1817
Dec 2 13:13:30 cbkidlll ide1: BM-DMA at 0x1818-0x181f
Dec 2 13:13:30 cbkidlll Probing IDE interface ide0...
Dec 2 13:13:30 cbkidlll hda: TSSTcorpCDW/DVD TS-L462D, ATAPI CD/DVD-ROM drive
Dec 2 13:13:30 cbkidlll hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Dec 2 13:13:30 cbkidlll hda: UDMA/33 mode selected
Dec 2 13:13:30 cbkidlll Probing IDE interface ide1...
Dec 2 13:13:30 cbkidlll ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Dec 2 13:13:30 cbkidlll ide1 at 0x170-0x177,0x376 on irq 15
Dec 2 13:13:30 cbkidlll ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Dec 2 13:13:30 cbkidlll ide_generic: I/O resource 0x1F0-0x1F7 not free.
Dec 2 13:13:30 cbkidlll ide_generic: I/O resource 0x170-0x177 not free.
Dec 2 13:13:30 cbkidlll hda: ATAPI 24X DVD-ROM CD-R/RW drive, 1536kB Cache
Dec 2 13:13:30 cbkidlll Uniform CD-ROM driver Revision: 3.20
Dec 2 13:13:30 cbkidlll Driver 'sd' needs updating - please use bus_type methods
Dec 2 13:13:30 cbkidlll Driver 'sr' needs updating - please use bus_type methods
Dec 2 13:13:30 cbkidlll PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Dec 2 13:13:30 cbkidlll i8042.c: Detected active multiplexing controller, rev 1.1.
Dec 2 13:13:30 cbkidlll serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 2 13:13:30 cbkidlll serio: i8042 AUX0 port at 0x60,0x64 irq 12
Dec 2 13:13:30 cbkidlll serio: i8042 AUX1 port at 0x60,0x64 irq 12
Dec 2 13:13:30 cbkidlll serio: i8042 AUX2 port at 0x60,0x64 irq 12
Dec 2 13:13:30 cbkidlll serio: i8042 AUX3 port at 0x60,0x64 irq 12
Dec 2 13:13:30 cbkidlll mice: PS/2 mouse device common for all mice
Dec 2 13:13:30 cbkidlll input: AT Translated Set 2 keyboard as /class/input/input1
Dec 2 13:13:30 cbkidlll cpuidle: using governor ladder
Dec 2 13:13:30 cbkidlll cpuidle: using governor menu
Dec 2 13:13:30 cbkidlll TCP cubic registered
Dec 2 13:13:30 cbkidlll NET: Registered protocol family 17
Dec 2 13:13:30 cbkidlll registered taskstats version 1
Dec 2 13:13:30 cbkidlll Freeing unused kernel memory: 280k freed
Dec 2 13:13:30 cbkidlll No dock devices found.
Dec 2 13:13:30 cbkidlll libata version 3.00 loaded.
Dec 2 13:13:30 cbkidlll input: PS/2 Logitech Wheel Mouse as /class/input/input2
Dec 2 13:13:30 cbkidlll CAPI Subsystem Rev 1.1.2.8
Dec 2 13:13:30 cbkidlll b1: revision 1.1.2.2
Dec 2 13:13:30 cbkidlll ata_piix 0000:00:1f.2: version 2.12
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:13:30 cbkidlll ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1f.2 to 64
Dec 2 13:13:30 cbkidlll scsi0 : ata_piix
Dec 2 13:13:30 cbkidlll scsi1 : ata_piix
Dec 2 13:13:30 cbkidlll ata1: SATA max UDMA/133 cmd 0x1c00 ctl 0x18f4 bmdma 0x18e0 irq 19
Dec 2 13:13:30 cbkidlll ata2: SATA max UDMA/133 cmd 0x18f8 ctl 0x18f0 bmdma 0x18e8 irq 19
Dec 2 13:13:30 cbkidlll ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Dec 2 13:13:30 cbkidlll ata1.00: ATA-7: Hitachi HTS541610J9SA00, SBCAC7MP, max UDMA/133
Dec 2 13:13:30 cbkidlll ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
Dec 2 13:13:30 cbkidlll ata1.00: configured for UDMA/133
Dec 2 13:13:30 cbkidlll ata2: SATA link down (SStatus 0 SControl 0)
Dec 2 13:13:30 cbkidlll isa bounce pool size: 16 pages
Dec 2 13:13:30 cbkidlll scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBCA PQ: 0 ANSI: 5
Dec 2 13:13:30 cbkidlll sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
Dec 2 13:13:30 cbkidlll sd 0:0:0:0: [sda] Write Protect is off
Dec 2 13:13:30 cbkidlll sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 2 13:13:30 cbkidlll sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 2 13:13:30 cbkidlll sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
Dec 2 13:13:30 cbkidlll sd 0:0:0:0: [sda] Write Protect is off
Dec 2 13:13:30 cbkidlll sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 2 13:13:30 cbkidlll sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 2 13:13:30 cbkidlll sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Dec 2 13:13:30 cbkidlll sd 0:0:0:0: [sda] Attached SCSI disk
Dec 2 13:13:30 cbkidlll sd 0:0:0:0: Attached scsi generic sg0 type 0
Dec 2 13:13:30 cbkidlll scsi: <fdomain> Detection failed (no card)
Dec 2 13:13:30 cbkidlll GDT-HA: Storage RAID Controller Driver. Version: 3.05
Dec 2 13:13:30 cbkidlll Fusion MPT base driver 3.04.06
Dec 2 13:13:30 cbkidlll Copyright (c) 1999-2007 LSI Corporation
Dec 2 13:13:30 cbkidlll Fusion MPT SPI Host driver 3.04.06
Dec 2 13:13:30 cbkidlll Fusion MPT FC Host driver 3.04.06
Dec 2 13:13:30 cbkidlll Fusion MPT SAS Host driver 3.04.06
Dec 2 13:13:30 cbkidlll 3ware Storage Controller device driver for Linux v1.26.02.002.
Dec 2 13:13:30 cbkidlll 3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
Dec 2 13:13:30 cbkidlll Compaq SMART2 Driver (v 2.6.0)
Dec 2 13:13:30 cbkidlll HP CISS Driver (v 3.6.20)
Dec 2 13:13:30 cbkidlll Adaptec aacraid driver 1.1-5[2456]-ms
Dec 2 13:13:30 cbkidlll megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
Dec 2 13:13:30 cbkidlll megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
Dec 2 13:13:30 cbkidlll megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
Dec 2 13:13:30 cbkidlll QLogic Fibre Channel HBA Driver: 8.02.01-k4
Dec 2 13:13:30 cbkidlll Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Dec 2 13:13:30 cbkidlll Copyright(c) 2004-2008 Emulex. All rights reserved.
Dec 2 13:13:30 cbkidlll usbcore: registered new interface driver usbfs
Dec 2 13:13:30 cbkidlll usbcore: registered new interface driver hub
Dec 2 13:13:30 cbkidlll usbcore: registered new device driver usb
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1a.7 to 64
Dec 2 13:13:30 cbkidlll ehci_hcd 0000:00:1a.7: EHCI Host Controller
Dec 2 13:13:30 cbkidlll ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Dec 2 13:13:30 cbkidlll ehci_hcd 0000:00:1a.7: debug port 1
Dec 2 13:13:30 cbkidlll PCI: cache line size of 32 is not supported by device 0000:00:1a.7
Dec 2 13:13:30 cbkidlll ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404000
Dec 2 13:13:30 cbkidlll ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Dec 2 13:13:30 cbkidlll usb usb1: configuration #1 chosen from 1 choice
Dec 2 13:13:30 cbkidlll hub 1-0:1.0: USB hub found
Dec 2 13:13:30 cbkidlll hub 1-0:1.0: 4 ports detected
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1d.7 to 64
Dec 2 13:13:30 cbkidlll ehci_hcd 0000:00:1d.7: EHCI Host Controller
Dec 2 13:13:30 cbkidlll ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Dec 2 13:13:30 cbkidlll ehci_hcd 0000:00:1d.7: debug port 1
Dec 2 13:13:30 cbkidlll PCI: cache line size of 32 is not supported by device 0000:00:1d.7
Dec 2 13:13:30 cbkidlll ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404400
Dec 2 13:13:30 cbkidlll ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Dec 2 13:13:30 cbkidlll usb usb2: configuration #1 chosen from 1 choice
Dec 2 13:13:30 cbkidlll hub 2-0:1.0: USB hub found
Dec 2 13:13:30 cbkidlll hub 2-0:1.0: 6 ports detected
Dec 2 13:13:30 cbkidlll Initializing USB Mass Storage driver...
Dec 2 13:13:30 cbkidlll usbcore: registered new interface driver usb-storage
Dec 2 13:13:30 cbkidlll USB Mass Storage support registered.
Dec 2 13:13:30 cbkidlll USB Universal Host Controller Interface driver v3.0
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1a.0 to 64
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1a.0: UHCI Host Controller
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
Dec 2 13:13:30 cbkidlll usb usb3: configuration #1 chosen from 1 choice
Dec 2 13:13:30 cbkidlll hub 3-0:1.0: USB hub found
Dec 2 13:13:30 cbkidlll hub 3-0:1.0: 2 ports detected
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1a.1 to 64
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1a.1: UHCI Host Controller
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
Dec 2 13:13:30 cbkidlll usb usb4: configuration #1 chosen from 1 choice
Dec 2 13:13:30 cbkidlll hub 4-0:1.0: USB hub found
Dec 2 13:13:30 cbkidlll hub 4-0:1.0: 2 ports detected
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1d.0 to 64
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1d.0: UHCI Host Controller
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
Dec 2 13:13:30 cbkidlll usb usb5: configuration #1 chosen from 1 choice
Dec 2 13:13:30 cbkidlll hub 5-0:1.0: USB hub found
Dec 2 13:13:30 cbkidlll hub 5-0:1.0: 2 ports detected
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1d.1 to 64
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1d.1: UHCI Host Controller
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
Dec 2 13:13:30 cbkidlll usb usb6: configuration #1 chosen from 1 choice
Dec 2 13:13:30 cbkidlll hub 6-0:1.0: USB hub found
Dec 2 13:13:30 cbkidlll hub 6-0:1.0: 2 ports detected
Dec 2 13:13:30 cbkidlll usb 3-1: new low speed USB device using uhci_hcd and address 2
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1d.2 to 64
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1d.2: UHCI Host Controller
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Dec 2 13:13:30 cbkidlll uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
Dec 2 13:13:30 cbkidlll usb usb7: configuration #1 chosen from 1 choice
Dec 2 13:13:30 cbkidlll hub 7-0:1.0: USB hub found
Dec 2 13:13:30 cbkidlll hub 7-0:1.0: 2 ports detected
Dec 2 13:13:30 cbkidlll usb 3-1: configuration #1 chosen from 1 choice
Dec 2 13:13:30 cbkidlll ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 2 13:13:30 cbkidlll usb 5-1: new low speed USB device using uhci_hcd and address 2
Dec 2 13:13:30 cbkidlll usb 5-1: configuration #1 chosen from 1 choice
Dec 2 13:13:30 cbkidlll usbcore: registered new interface driver hiddev
Dec 2 13:13:30 cbkidlll input: HID 04f3:0103 as /class/input/input3
Dec 2 13:13:30 cbkidlll input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1a.0-1
Dec 2 13:13:30 cbkidlll input: HID 04f3:0103 as /class/input/input4
Dec 2 13:13:30 cbkidlll input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1a.0-1
Dec 2 13:13:30 cbkidlll input: USB Mouse as /class/input/input5
Dec 2 13:13:30 cbkidlll input,hidraw2: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-1
Dec 2 13:13:30 cbkidlll usbcore: registered new interface driver usbhid
Dec 2 13:13:30 cbkidlll usbhid: v2.6:USB HID core driver
Dec 2 13:13:30 cbkidlll sl811: driver sl811-hcd, 19 May 2005
Dec 2 13:13:30 cbkidlll device-mapper: uevent: version 1.0.3
Dec 2 13:13:30 cbkidlll device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
Dec 2 13:13:30 cbkidlll md: raid0 personality registered for level 0
Dec 2 13:13:30 cbkidlll md: raid1 personality registered for level 1
Dec 2 13:13:30 cbkidlll async_tx: api initialized (async)
Dec 2 13:13:30 cbkidlll xor: automatically using best checksumming function: generic_sse
Dec 2 13:13:30 cbkidlll generic_sse: 5357.200 MB/sec
Dec 2 13:13:30 cbkidlll xor: using function: generic_sse (5357.200 MB/sec)
Dec 2 13:13:30 cbkidlll raid6: int64x1 1425 MB/s
Dec 2 13:13:30 cbkidlll raid6: int64x2 1819 MB/s
Dec 2 13:13:30 cbkidlll raid6: int64x4 1360 MB/s
Dec 2 13:13:30 cbkidlll raid6: int64x8 1253 MB/s
Dec 2 13:13:30 cbkidlll raid6: sse2x1 2337 MB/s
Dec 2 13:13:30 cbkidlll raid6: sse2x2 2572 MB/s
Dec 2 13:13:30 cbkidlll raid6: sse2x4 4430 MB/s
Dec 2 13:13:30 cbkidlll raid6: using algorithm sse2x4 (4430 MB/s)
Dec 2 13:13:30 cbkidlll md: raid6 personality registered for level 6
Dec 2 13:13:30 cbkidlll md: raid5 personality registered for level 5
Dec 2 13:13:30 cbkidlll md: raid4 personality registered for level 4
Dec 2 13:13:30 cbkidlll md: raid10 personality registered for level 10
Dec 2 13:13:30 cbkidlll JFS: nTxBlock = 7943, nTxLock = 63548
Dec 2 13:13:30 cbkidlll RPC: Registered udp transport module.
Dec 2 13:13:30 cbkidlll RPC: Registered tcp transport module.
Dec 2 13:13:30 cbkidlll Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Dec 2 13:13:30 cbkidlll Copyright (c) 1999-2006 Intel Corporation.
Dec 2 13:13:30 cbkidlll kjournald starting. Commit interval 5 seconds
Dec 2 13:13:30 cbkidlll EXT3-fs: mounted filesystem with ordered data mode.
Dec 2 13:13:30 cbkidlll input: Power Button (FF) as /class/input/input6
Dec 2 13:13:30 cbkidlll ACPI: Power Button (FF) [PWRF]
Dec 2 13:13:30 cbkidlll input: Power Button (CM) as /class/input/input7
Dec 2 13:13:30 cbkidlll input: PC Speaker as /class/input/input8
Dec 2 13:13:30 cbkidlll ACPI: Power Button (CM) [PWRB]
Dec 2 13:13:30 cbkidlll input: Lid Switch as /class/input/input9
Dec 2 13:13:30 cbkidlll ACPI: SSDT 3F6D51D9, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
Dec 2 13:13:30 cbkidlll ACPI: SSDT 3F6D4C62, 04F2 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Dec 2 13:13:30 cbkidlll Monitor-Mwait will be used to enter C-1 state
Dec 2 13:13:30 cbkidlll Monitor-Mwait will be used to enter C-2 state
Dec 2 13:13:30 cbkidlll ACPI: CPU0 (power states: C1[C1] C2[C2])
Dec 2 13:13:30 cbkidlll ACPI: ACPI0007:00 is registered as cooling_device0
Dec 2 13:13:30 cbkidlll ACPI: Processor [CPU0] (supports 8 throttling states)
Dec 2 13:13:30 cbkidlll ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003f2c4348 [20080321]
Dec 2 13:13:30 cbkidlll ACPI: SSDT 3F6D53CF, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
Dec 2 13:13:30 cbkidlll ACPI: SSDT 3F6D5154, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
Dec 2 13:13:30 cbkidlll ACPI: CPU1 (power states: C1[C1] C2[C2])
Dec 2 13:13:30 cbkidlll ACPI: ACPI0007:01 is registered as cooling_device1
Dec 2 13:13:30 cbkidlll ACPI: Processor [CPU1] (supports 8 throttling states)
Dec 2 13:13:30 cbkidlll ACPI: device:06 is registered as cooling_device2
Dec 2 13:13:30 cbkidlll Monitor-Mwait will be used to enter C-3 state
Dec 2 13:13:30 cbkidlll Marking TSC unstable due to TSC halts in idle
Dec 2 13:13:30 cbkidlll input: Video Bus as /class/input/input10
Dec 2 13:13:30 cbkidlll ACPI: Lid Switch [LID]
Dec 2 13:13:30 cbkidlll input: Sleep Button (CM) as /class/input/input11
Dec 2 13:13:30 cbkidlll ACPI: Sleep Button (CM) [SLPB]
Dec 2 13:13:30 cbkidlll ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Dec 2 13:13:30 cbkidlll agpgart: Detected an Intel 965GM Chipset.
Dec 2 13:13:30 cbkidlll agpgart: Detected 7676K stolen memory.
Dec 2 13:13:30 cbkidlll ACPI: LNXTHERM:01 is registered as thermal_zone0
Dec 2 13:13:30 cbkidlll ACPI: Thermal Zone [THRM] (54 C)
Dec 2 13:13:30 cbkidlll agpgart: AGP aperture is 256M @ 0xd0000000
Dec 2 13:13:30 cbkidlll Clocksource tsc unstable (delta = -171629671 ns)
Dec 2 13:13:30 cbkidlll r8169 Gigabit Ethernet driver 2.2LK loaded
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:06:00.0 to 64
Dec 2 13:13:30 cbkidlll eth0: RTL8101e at 0xffffc20000056000, 00:03:0d:60:b4:d1, XID 34000000 IRQ 1276
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:13:30 cbkidlll ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
Dec 2 13:13:30 cbkidlll PCI: Setting latency timer of device 0000:00:1b.0 to 64
Dec 2 13:13:30 cbkidlll hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Dec 2 13:13:30 cbkidlll rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Dec 2 13:13:30 cbkidlll rtc0: alarms up to one month, y3k
Dec 2 13:13:30 cbkidlll EXT3 FS on sda7, internal journal
Dec 2 13:13:30 cbkidlll kjournald starting. Commit interval 5 seconds
Dec 2 13:13:30 cbkidlll EXT3 FS on sda1, internal journal
Dec 2 13:13:30 cbkidlll EXT3-fs: mounted filesystem with ordered data mode.
Dec 2 13:13:30 cbkidlll kjournald starting. Commit interval 5 seconds
Dec 2 13:13:30 cbkidlll EXT3 FS on sda8, internal journal
Dec 2 13:13:30 cbkidlll EXT3-fs: mounted filesystem with ordered data mode.
Dec 2 13:13:30 cbkidlll kjournald starting. Commit interval 5 seconds
Dec 2 13:13:30 cbkidlll EXT3 FS on sda6, internal journal
Dec 2 13:13:30 cbkidlll EXT3-fs: mounted filesystem with ordered data mode.
Dec 2 13:13:30 cbkidlll r8169: eth0: link up
Dec 2 13:13:30 cbkidlll r8169: eth0: link up
Dec 2 13:13:30 cbkidlll Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k
Dec 2 13:13:31 cbkidlll acpid: client connected from 14924[102:443]
Dec 2 13:13:31 cbkidlll acpid: 1 client rule loaded
Dec 2 13:13:32 cbkidlll cron[14997]: (CRON) STARTUP (V5.0)
Dec 2 13:13:33 cbkidlll acpid: client connected from 14986[0:0]
Dec 2 13:13:33 cbkidlll acpid: 1 client rule loaded
Dec 2 13:13:33 cbkidlll ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003ac33ed0 [20080321]
Dec 2 13:13:33 cbkidlll ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003e5879c0 [20080321]
Dec 2 13:13:34 cbkidlll ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003ac33ed0 [20080321]
Dec 2 13:13:35 cbkidlll [drm] Initialized drm 1.1.0 20060810
Dec 2 13:13:35 cbkidlll ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Dec 2 13:13:35 cbkidlll PCI: Setting latency timer of device 0000:00:02.0 to 64
Dec 2 13:13:35 cbkidlll [drm] Initialized i915 1.6.0 20060119 on minor 0
Dec 2 13:13:35 cbkidlll [drm:i915_getparam] *ERROR* Unknown parameter 5
Dec 2 13:13:35 cbkidlll ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003e587df8 [20080321]
Dec 2 13:13:35 cbkidlll ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003e587a08 [20080321]
Dec 2 13:13:36 cbkidlll ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003f2c6d68 [20080321]
Dec 2 13:13:36 cbkidlll [drm:i915_getparam] *ERROR* Unknown parameter 5
Dec 2 13:13:38 cbkidlll ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003e587ae0 [20080321]
Dec 2 13:13:46 cbkidlll kdm: :0[15044]: pam_unix(kde:session): session opened for user cbkid by (uid=0)
Dec 2 13:14:00 cbkidlll ACPI Error (utobject-0502): Unsupported Reference opcode=88 in object ffff81003ac33390 [20080321]
Dec 2 13:14:49 cbkidlll sudo: cbkid : TTY=pts/2 ; PWD=/home/cbkid ; USER=root ; COMMAND=/bin/mv /var/log/messages mes26
Dec 2 13:14:49 cbkidlll sudo: pam_unix(sudo:session): session opened for user root by cbkid(uid=0)
Dec 2 13:14:49 cbkidlll sudo: pam_unix(sudo:session): session closed for user root

复制代码

cbkid · 发表于 2008-12-2 13:50:08

28从开机到关机的/var/log/messages

Dec 2 13:10:43 cbkidlll syslog-ng[2224]: syslog-ng starting up; version='2.0.9'
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
Dec 2 13:10:43 cbkidlll [ 0.000000] Initializing cgroup subsys cpuset
Dec 2 13:10:43 cbkidlll [ 0.000000] Initializing cgroup subsys cpu
Dec 2 13:10:43 cbkidlll [ 0.000000] Linux version 2.6.28-rc6 (root@cbkidlll) (gcc version 4.3.2 (Gentoo 4.3.2 p1.2) ) #1 SMP Mon Dec 1 09:32:18 CST 2008
Dec 2 13:10:43 cbkidlll [ 0.000000] Command line: root=/dev/sda7 agp=try_unsupported
Dec 2 13:10:43 cbkidlll [ 0.000000] KERNEL supported cpus:
Dec 2 13:10:43 cbkidlll [ 0.000000] Intel GenuineIntel
Dec 2 13:10:43 cbkidlll [ 0.000000] AMD AuthenticAMD
Dec 2 13:10:43 cbkidlll [ 0.000000] Centaur CentaurHauls
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-provided physical RAM map:
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 000000003f6d0000 - 000000003f6df000 (ACPI NVS)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 000000003f6df000 - 0000000040000000 (reserved)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Dec 2 13:10:43 cbkidlll [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Dec 2 13:10:43 cbkidlll [ 0.000000] DMI present.
Dec 2 13:10:43 cbkidlll [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
Dec 2 13:10:43 cbkidlll [ 0.000000] last_pfn = 0x3f6d0 max_arch_pfn = 0x3ffffffff
Dec 2 13:10:43 cbkidlll [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Dec 2 13:10:43 cbkidlll [ 0.000000] init_memory_mapping: 0000000000000000-000000003f6d0000
Dec 2 13:10:43 cbkidlll [ 0.000000] 0000000000 - 003f600000 page 2M
Dec 2 13:10:43 cbkidlll [ 0.000000] 003f600000 - 003f6d0000 page 4k
Dec 2 13:10:43 cbkidlll [ 0.000000] kernel direct mapping tables up to 3f6d0000 @ 10000-13000
Dec 2 13:10:43 cbkidlll [ 0.000000] last_map_addr: 3f6d0000 end: 3f6d0000
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: RSDP 000F80B0, 0024 (r2 PTLTD )
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: XSDT 3F6D433A, 008C (r1 HASEE PARADISE 6040000 LTP 0)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: FACP 3F6DBC2C, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: DSDT 3F6D6252, 5966 (r2 ECS___ F43_____ 6040000 INTL 20050624)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: FACS 3F6DEFC0, 0040
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: APIC 3F6DBD20, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: HPET 3F6DBD88, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: MCFG 3F6DBDC0, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: TMOR 3F6DBDFC, 0026 (r1 PTLTD 6040000 PTL 3)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: APIC 3F6DBE22, 0068 (r1 PTLTD APIC 6040000 LTP 0)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: SLIC 3F6DBE8A, 0176 (r1 HASEE PARADISE 6040000 LTP 0)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: SSDT 3F6D5C03, 064F (r1 SataRe SataPri 1000 INTL 20050624)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: SSDT 3F6D5567, 069C (r1 SataRe SataSec 1000 INTL 20050624)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: SSDT 3F6D5497, 00D0 (r1 BrtRef DD01BRT 1000 INTL 20050624)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: SSDT 3F6D4A03, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: SSDT 3F6D495D, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: SSDT 3F6D43C6, 0597 (r1 PmRef CpuPm 3000 INTL 20050624)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: Local APIC address 0xfee00000
Dec 2 13:10:43 cbkidlll [ 0.000000] No NUMA configuration found
Dec 2 13:10:43 cbkidlll [ 0.000000] Faking a node at 0000000000000000-000000003f6d0000
Dec 2 13:10:43 cbkidlll [ 0.000000] Bootmem setup node 0 0000000000000000-000000003f6d0000
Dec 2 13:10:43 cbkidlll [ 0.000000] NODE_DATA [0000000000011000 - 0000000000015fff]
Dec 2 13:10:43 cbkidlll [ 0.000000] bootmap [0000000000016000 - 000000000001dedf] pages 8
Dec 2 13:10:43 cbkidlll [ 0.000000] (5 early reservations) ==> bootmem [0000000000 - 003f6d0000]
Dec 2 13:10:43 cbkidlll [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
Dec 2 13:10:43 cbkidlll [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
Dec 2 13:10:43 cbkidlll [ 0.000000] #2 [0000200000 - 0000ba296c] TEXT DATA BSS ==> [0000200000 - 0000ba296c]
Dec 2 13:10:43 cbkidlll [ 0.000000] #3 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
Dec 2 13:10:43 cbkidlll [ 0.000000] #4 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
Dec 2 13:10:43 cbkidlll [ 0.000000] found SMP MP-table at [ffff8800000f80e0] 000f80e0
Dec 2 13:10:43 cbkidlll [ 0.000000] [ffffe20000000000-ffffe20000dfffff] PMD -> [ffff880001200000-ffff880001ffffff] on node 0
Dec 2 13:10:43 cbkidlll [ 0.000000] Zone PFN ranges:
Dec 2 13:10:43 cbkidlll [ 0.000000] DMA 0x00000010 -> 0x00001000
Dec 2 13:10:43 cbkidlll [ 0.000000] DMA32 0x00001000 -> 0x00100000
Dec 2 13:10:43 cbkidlll [ 0.000000] Normal 0x00100000 -> 0x00100000
Dec 2 13:10:43 cbkidlll [ 0.000000] Movable zone start PFN for each node
Dec 2 13:10:43 cbkidlll [ 0.000000] early_node_map[2] active PFN ranges
Dec 2 13:10:43 cbkidlll [ 0.000000] 0: 0x00000010 -> 0x0000009f
Dec 2 13:10:43 cbkidlll [ 0.000000] 0: 0x00000100 -> 0x0003f6d0
Dec 2 13:10:43 cbkidlll [ 0.000000] On node 0 totalpages: 259679
Dec 2 13:10:43 cbkidlll [ 0.000000] DMA zone: 56 pages used for memmap
Dec 2 13:10:43 cbkidlll [ 0.000000] DMA zone: 2568 pages reserved
Dec 2 13:10:43 cbkidlll [ 0.000000] DMA zone: 1359 pages, LIFO batch:0
Dec 2 13:10:43 cbkidlll [ 0.000000] DMA32 zone: 3496 pages used for memmap
Dec 2 13:10:43 cbkidlll [ 0.000000] DMA32 zone: 252200 pages, LIFO batch:31
Dec 2 13:10:43 cbkidlll [ 0.000000] Normal zone: 0 pages used for memmap
Dec 2 13:10:43 cbkidlll [ 0.000000] Movable zone: 0 pages used for memmap
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: Local APIC address 0xfee00000
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Dec 2 13:10:43 cbkidlll [ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: IRQ0 used by override.
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: IRQ2 used by override.
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: IRQ9 used by override.
Dec 2 13:10:43 cbkidlll [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Dec 2 13:10:43 cbkidlll [ 0.000000] Using ACPI (MADT) for SMP configuration information
Dec 2 13:10:43 cbkidlll [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Dec 2 13:10:43 cbkidlll [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Dec 2 13:10:43 cbkidlll [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
Dec 2 13:10:43 cbkidlll [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Dec 2 13:10:43 cbkidlll [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
Dec 2 13:10:43 cbkidlll [ 0.000000] PERCPU: Allocating 57344 bytes of per cpu data
Dec 2 13:10:43 cbkidlll [ 0.000000] per cpu data for cpu0 on node0 at 000000000100a000
Dec 2 13:10:43 cbkidlll [ 0.000000] per cpu data for cpu1 on node0 at 0000000001018000
Dec 2 13:10:43 cbkidlll [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
Dec 2 13:10:43 cbkidlll [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 253559
Dec 2 13:10:43 cbkidlll [ 0.000000] Policy zone: DMA32
Dec 2 13:10:43 cbkidlll [ 0.000000] Kernel command line: root=/dev/sda7 agp=try_unsupported
Dec 2 13:10:43 cbkidlll [ 0.000000] Initializing CPU#0
Dec 2 13:10:43 cbkidlll [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
Dec 2 13:10:43 cbkidlll [ 0.000000] Extended CMOS year: 2000
Dec 2 13:10:43 cbkidlll [ 0.000000] Fast TSC calibration using PIT
Dec 2 13:10:43 cbkidlll [ 0.000000] Detected 1463.044 MHz processor.
Dec 2 13:10:43 cbkidlll [ 0.000999] Console: colour VGA+ 80x25
Dec 2 13:10:43 cbkidlll [ 0.000999] console [tty0] enabled
Dec 2 13:10:43 cbkidlll [ 0.000999] Checking aperture...
Dec 2 13:10:43 cbkidlll [ 0.000999] No AGP bridge found
Dec 2 13:10:43 cbkidlll [ 0.000999] Calgary: detecting Calgary via BIOS EBDA area
Dec 2 13:10:43 cbkidlll [ 0.000999] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Dec 2 13:10:43 cbkidlll [ 0.000999] Memory: 1014204k/1039168k available (4752k kernel code, 452k absent, 24512k reserved, 3151k data, 532k init)
Dec 2 13:10:43 cbkidlll [ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Dec 2 13:10:43 cbkidlll [ 0.000999] hpet clockevent registered
Dec 2 13:10:43 cbkidlll [ 0.000999] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Dec 2 13:10:43 cbkidlll [ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 2926.08 BogoMIPS (lpj=1463044)
Dec 2 13:10:43 cbkidlll [ 0.000999] Security Framework initialized
Dec 2 13:10:43 cbkidlll [ 0.000999] SELinux: Initializing.
Dec 2 13:10:43 cbkidlll [ 0.000999] SELinux: Starting in permissive mode
Dec 2 13:10:43 cbkidlll [ 0.000999] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Dec 2 13:10:43 cbkidlll [ 0.001814] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Dec 2 13:10:43 cbkidlll [ 0.002394] Mount-cache hash table entries: 256
Dec 2 13:10:43 cbkidlll [ 0.002769] Initializing cgroup subsys ns
Dec 2 13:10:43 cbkidlll [ 0.003012] Initializing cgroup subsys cpuacct
Dec 2 13:10:43 cbkidlll [ 0.003186] CPU: L1 I cache: 32K, L1 D cache: 32K
Dec 2 13:10:43 cbkidlll [ 0.003377] CPU: L2 cache: 1024K
Dec 2 13:10:43 cbkidlll [ 0.003524] CPU 0/0x0 -> Node 0
Dec 2 13:10:43 cbkidlll [ 0.003666] CPU: Physical Processor ID: 0
Dec 2 13:10:43 cbkidlll [ 0.003813] CPU: Processor Core ID: 0
Dec 2 13:10:43 cbkidlll [ 0.004009] CPU0: Thermal monitoring handled by SMI
Dec 2 13:10:43 cbkidlll [ 0.004012] using mwait in idle threads.
Dec 2 13:10:43 cbkidlll [ 0.004185] ACPI: Core revision 20080926
Dec 2 13:10:43 cbkidlll [ 0.017083] Setting APIC routing to flat
Dec 2 13:10:43 cbkidlll [ 0.017590] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Dec 2 13:10:43 cbkidlll [ 0.028221] CPU0: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz stepping 0d
Dec 2 13:10:43 cbkidlll [ 0.028995] Booting processor 1 APIC 0x1 ip 0x6000
Dec 2 13:10:43 cbkidlll [ 0.000999] Initializing CPU#1
Dec 2 13:10:43 cbkidlll [ 0.000999] Calibrating delay using timer specific routine.. 2925.86 BogoMIPS (lpj=1462932)
Dec 2 13:10:43 cbkidlll [ 0.000999] CPU: L1 I cache: 32K, L1 D cache: 32K
Dec 2 13:10:43 cbkidlll [ 0.000999] CPU: L2 cache: 1024K
Dec 2 13:10:43 cbkidlll [ 0.000999] CPU 1/0x1 -> Node 0
Dec 2 13:10:43 cbkidlll [ 0.000999] CPU: Physical Processor ID: 0
Dec 2 13:10:43 cbkidlll [ 0.000999] CPU: Processor Core ID: 1
Dec 2 13:10:43 cbkidlll [ 0.000999] CPU1: Thermal monitoring enabled (TM2)
Dec 2 13:10:43 cbkidlll [ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
Dec 2 13:10:43 cbkidlll [ 0.100355] CPU1: Intel(R) Pentium(R) Dual CPU T2310 @ 1.46GHz stepping 0d
Dec 2 13:10:43 cbkidlll [ 0.101198] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Dec 2 13:10:43 cbkidlll [ 0.102005] Brought up 2 CPUs
Dec 2 13:10:43 cbkidlll [ 0.102144] Total of 2 processors activated (5851.95 BogoMIPS).
Dec 2 13:10:43 cbkidlll [ 0.102391] khelper used greatest stack depth: 6000 bytes left
Dec 2 13:10:43 cbkidlll [ 0.103031] net_namespace: 1344 bytes
Dec 2 13:10:43 cbkidlll [ 0.103345] Time: 13:09:28 Date: 12/02/08
Dec 2 13:10:43 cbkidlll [ 0.103345] NET: Registered protocol family 16
Dec 2 13:10:43 cbkidlll [ 0.104024] ACPI: bus type pci registered
Dec 2 13:10:43 cbkidlll [ 0.104176] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
Dec 2 13:10:43 cbkidlll [ 0.104182] PCI: MCFG area at e0000000 reserved in E820
Dec 2 13:10:43 cbkidlll [ 0.119356] PCI: Using MMCONFIG at e0000000 - efffffff
Dec 2 13:10:43 cbkidlll [ 0.119502] PCI: Using configuration type 1 for base access
Dec 2 13:10:43 cbkidlll [ 0.129333] ACPI: EC: Look up EC in DSDT
Dec 2 13:10:43 cbkidlll [ 0.133023] ACPI: BIOS _OSI(Linux) query ignored
Dec 2 13:10:43 cbkidlll [ 0.133174] ACPI: DMI System Vendor: HASEE
Dec 2 13:10:43 cbkidlll [ 0.133318] ACPI: DMI Product Name: HASEE
Dec 2 13:10:43 cbkidlll [ 0.133462] ACPI: DMI Product Version:
Dec 2 13:10:43 cbkidlll [ 0.133604] ACPI: DMI Board Name: HASEE
Dec 2 13:10:43 cbkidlll [ 0.133747] ACPI: DMI BIOS Vendor: Phoenix Technologies LTD
Dec 2 13:10:43 cbkidlll [ 0.133892] ACPI: DMI BIOS Date: 08/03/2007
Dec 2 13:10:43 cbkidlll [ 0.133981] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
Dec 2 13:10:43 cbkidlll [ 0.134130] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
Dec 2 13:10:43 cbkidlll [ 0.135163] ACPI: EC: non-query interrupt received, switching to interrupt mode
Dec 2 13:10:43 cbkidlll [ 0.139092] ACPI: Interpreter enabled
Dec 2 13:10:43 cbkidlll [ 0.139238] ACPI: (supports S0 S3 S4 S5)
Dec 2 13:10:43 cbkidlll [ 0.140117] ACPI: Using IOAPIC for interrupt routing
Dec 2 13:10:43 cbkidlll [ 0.148183] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
Dec 2 13:10:43 cbkidlll [ 0.148262] ACPI: EC: driver started in interrupt mode
Dec 2 13:10:43 cbkidlll [ 0.149177] ACPI: No dock devices found.
Dec 2 13:10:43 cbkidlll [ 0.149335] ACPI: PCI Root Bridge [PCI0] (0000:00)
Dec 2 13:10:43 cbkidlll [ 0.149522] pci 0000:00:02.0: reg 10 64bit mmio: [0xfc000000-0xfc0fffff]
Dec 2 13:10:43 cbkidlll [ 0.149522] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
Dec 2 13:10:43 cbkidlll [ 0.149522] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
Dec 2 13:10:43 cbkidlll [ 0.149522] pci 0000:00:02.1: reg 10 64bit mmio: [0xfc100000-0xfc1fffff]
Dec 2 13:10:43 cbkidlll [ 0.149522] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f]
Dec 2 13:10:43 cbkidlll [ 0.149988] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f]
Dec 2 13:10:43 cbkidlll [ 0.150068] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc404000-0xfc4043ff]
Dec 2 13:10:43 cbkidlll [ 0.150122] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Dec 2 13:10:43 cbkidlll [ 0.150273] pci 0000:00:1a.7: PME# disabled
Dec 2 13:10:43 cbkidlll [ 0.150475] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc400000-0xfc403fff]
Dec 2 13:10:43 cbkidlll [ 0.150520] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Dec 2 13:10:43 cbkidlll [ 0.150668] pci 0000:00:1b.0: PME# disabled
Dec 2 13:10:43 cbkidlll [ 0.150887] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Dec 2 13:10:43 cbkidlll [ 0.150982] pci 0000:00:1c.0: PME# disabled
Dec 2 13:10:43 cbkidlll [ 0.151202] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
Dec 2 13:10:43 cbkidlll [ 0.151349] pci 0000:00:1c.2: PME# disabled
Dec 2 13:10:43 cbkidlll [ 0.152055] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Dec 2 13:10:43 cbkidlll [ 0.152204] pci 0000:00:1c.3: PME# disabled
Dec 2 13:10:43 cbkidlll [ 0.152425] pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f]
Dec 2 13:10:43 cbkidlll [ 0.152496] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f]
Dec 2 13:10:43 cbkidlll [ 0.152567] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf]
Dec 2 13:10:43 cbkidlll [ 0.152646] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc404400-0xfc4047ff]
Dec 2 13:10:43 cbkidlll [ 0.152699] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Dec 2 13:10:43 cbkidlll [ 0.152844] pci 0000:00:1d.7: PME# disabled
Dec 2 13:10:43 cbkidlll [ 0.153146] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
Dec 2 13:10:43 cbkidlll [ 0.153382] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
Dec 2 13:10:43 cbkidlll [ 0.153564] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
Dec 2 13:10:43 cbkidlll [ 0.153574] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
Dec 2 13:10:43 cbkidlll [ 0.153583] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
Dec 2 13:10:43 cbkidlll [ 0.153592] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
Dec 2 13:10:43 cbkidlll [ 0.153601] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
Dec 2 13:10:43 cbkidlll [ 0.153662] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07]
Dec 2 13:10:43 cbkidlll [ 0.153672] pci 0000:00:1f.2: reg 14 io port: [0x18f4-0x18f7]
Dec 2 13:10:43 cbkidlll [ 0.153681] pci 0000:00:1f.2: reg 18 io port: [0x18f8-0x18ff]
Dec 2 13:10:43 cbkidlll [ 0.153690] pci 0000:00:1f.2: reg 1c io port: [0x18f0-0x18f3]
Dec 2 13:10:43 cbkidlll [ 0.153700] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ef]
Dec 2 13:10:43 cbkidlll [ 0.153709] pci 0000:00:1f.2: reg 24 io port: [0x18d0-0x18df]
Dec 2 13:10:43 cbkidlll [ 0.153731] pci 0000:00:1f.2: PME# supported from D3hot
Dec 2 13:10:43 cbkidlll [ 0.153981] pci 0000:00:1f.2: PME# disabled
Dec 2 13:10:43 cbkidlll [ 0.154154] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
Dec 2 13:10:43 cbkidlll [ 0.154182] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
Dec 2 13:10:43 cbkidlll [ 0.154276] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
Dec 2 13:10:43 cbkidlll [ 0.154282] pci 0000:00:1c.0: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
Dec 2 13:10:43 cbkidlll [ 0.154292] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
Dec 2 13:10:43 cbkidlll [ 0.154359] pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff]
Dec 2 13:10:43 cbkidlll [ 0.154365] pci 0000:00:1c.2: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
Dec 2 13:10:43 cbkidlll [ 0.154375] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
Dec 2 13:10:43 cbkidlll [ 0.154457] pci 0000:06:00.0: reg 10 io port: [0x4000-0x40ff]
Dec 2 13:10:43 cbkidlll [ 0.154488] pci 0000:06:00.0: reg 18 64bit mmio: [0xfa000000-0xfa000fff]
Dec 2 13:10:43 cbkidlll [ 0.154520] pci 0000:06:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
Dec 2 13:10:43 cbkidlll [ 0.154538] pci 0000:06:00.0: supports D1 D2
Dec 2 13:10:43 cbkidlll [ 0.154541] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Dec 2 13:10:43 cbkidlll [ 0.154689] pci 0000:06:00.0: PME# disabled
Dec 2 13:10:43 cbkidlll [ 0.154907] pci 0000:00:1c.3: bridge io port: [0x4000-0x4fff]
Dec 2 13:10:43 cbkidlll [ 0.154913] pci 0000:00:1c.3: bridge 32bit mmio: [0xfa000000-0xfbffffff]
Dec 2 13:10:43 cbkidlll [ 0.154922] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf5ffffff]
Dec 2 13:10:43 cbkidlll [ 0.155010] pci 0000:00:1e.0: transparent bridge
Dec 2 13:10:43 cbkidlll [ 0.155205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Dec 2 13:10:43 cbkidlll [ 0.155926] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Dec 2 13:10:43 cbkidlll [ 0.156148] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
Dec 2 13:10:43 cbkidlll [ 0.156357] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Dec 2 13:10:43 cbkidlll [ 0.156598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
Dec 2 13:10:43 cbkidlll [ 0.156653] ACPI Warning (nspredef-0357): \_SB_.PCI0.PCIB._PRT: Return Package has no elements (empty) [20080926]
Dec 2 13:10:43 cbkidlll [ 0.172462] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
Dec 2 13:10:43 cbkidlll [ 0.173763] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Dec 2 13:10:43 cbkidlll [ 0.174752] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
Dec 2 13:10:43 cbkidlll [ 0.175576] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Dec 2 13:10:43 cbkidlll [ 0.176573] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
Dec 2 13:10:43 cbkidlll [ 0.177575] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
Dec 2 13:10:43 cbkidlll [ 0.178395] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
Dec 2 13:10:43 cbkidlll [ 0.179391] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
Dec 2 13:10:43 cbkidlll [ 0.181070] SCSI subsystem initialized
Dec 2 13:10:43 cbkidlll [ 0.181144] libata version 3.00 loaded.
Dec 2 13:10:43 cbkidlll [ 0.181144] usbcore: registered new interface driver usbfs
Dec 2 13:10:43 cbkidlll [ 0.181144] usbcore: registered new interface driver hub
Dec 2 13:10:43 cbkidlll [ 0.181999] usbcore: registered new device driver usb
Dec 2 13:10:43 cbkidlll [ 0.182126] dca service started, version 1.4
Dec 2 13:10:43 cbkidlll [ 0.182126] PCI: Using ACPI for IRQ routing
Dec 2 13:10:43 cbkidlll [ 0.191013] cfg80211: Using static regulatory domain info
Dec 2 13:10:43 cbkidlll [ 0.191137] cfg80211: Regulatory domain: US
Dec 2 13:10:43 cbkidlll [ 0.191277] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Dec 2 13:10:43 cbkidlll [ 0.191513] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
Dec 2 13:10:43 cbkidlll [ 0.191660] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Dec 2 13:10:43 cbkidlll [ 0.191806] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Dec 2 13:10:43 cbkidlll [ 0.191973] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Dec 2 13:10:43 cbkidlll [ 0.192120] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
Dec 2 13:10:43 cbkidlll [ 0.192266] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
Dec 2 13:10:43 cbkidlll [ 0.192412] cfg80211: Calling CRDA for country: US
Dec 2 13:10:43 cbkidlll [ 0.192562] NetLabel: Initializing
Dec 2 13:10:43 cbkidlll [ 0.192562] NetLabel: domain hash size = 128
Dec 2 13:10:43 cbkidlll [ 0.192562] NetLabel: protocols = UNLABELED CIPSOv4
Dec 2 13:10:43 cbkidlll [ 0.192989] NetLabel: unlabeled traffic allowed by default
Dec 2 13:10:43 cbkidlll [ 0.193160] PCI-GART: No AMD GART found.
Dec 2 13:10:43 cbkidlll [ 0.193313] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
Dec 2 13:10:43 cbkidlll [ 0.193639] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Dec 2 13:10:43 cbkidlll [ 0.197978] pnp: PnP ACPI init
Dec 2 13:10:43 cbkidlll [ 0.198131] ACPI: bus type pnp registered
Dec 2 13:10:43 cbkidlll [ 0.199468] pnp 00:01: mem resource (0xf0401000-0xf0401fff) overlaps 0000:00:1c.0 BAR 9 (0xf0000000-0xf1ffffff), disabling
Dec 2 13:10:43 cbkidlll [ 0.201873] pnp: PnP ACPI: found 10 devices
Dec 2 13:10:43 cbkidlll [ 0.202025] ACPI: ACPI bus type pnp unregistered
Dec 2 13:10:43 cbkidlll [ 0.202182] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
Dec 2 13:10:43 cbkidlll [ 0.202333] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
Dec 2 13:10:43 cbkidlll [ 0.202487] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
Dec 2 13:10:43 cbkidlll [ 0.202632] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
Dec 2 13:10:43 cbkidlll [ 0.202780] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
Dec 2 13:10:43 cbkidlll [ 0.202927] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
Dec 2 13:10:43 cbkidlll [ 0.203081] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
Dec 2 13:10:43 cbkidlll [ 0.203233] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
Dec 2 13:10:43 cbkidlll [ 0.203387] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
Dec 2 13:10:43 cbkidlll [ 0.203543] system 00:06: ioport range 0x200-0x20f has been reserved
Dec 2 13:10:43 cbkidlll [ 0.203691] system 00:06: ioport range 0x260-0x26f has been reserved
Dec 2 13:10:43 cbkidlll [ 0.203838] system 00:06: ioport range 0x300-0x30f has been reserved
Dec 2 13:10:43 cbkidlll [ 0.203986] system 00:06: ioport range 0x378-0x387 has been reserved
Dec 2 13:10:43 cbkidlll [ 0.204133] system 00:06: ioport range 0x3f0-0x3ff could not be reserved
Dec 2 13:10:43 cbkidlll [ 0.204282] system 00:06: ioport range 0x680-0x69f has been reserved
Dec 2 13:10:43 cbkidlll [ 0.204429] system 00:06: ioport range 0x800-0x80f has been reserved
Dec 2 13:10:43 cbkidlll [ 0.204577] system 00:06: ioport range 0x1000-0x107f has been reserved
Dec 2 13:10:43 cbkidlll [ 0.204727] system 00:06: ioport range 0x1180-0x11bf has been reserved
Dec 2 13:10:43 cbkidlll [ 0.204871] system 00:06: ioport range 0x1640-0x164f has been reserved
Dec 2 13:10:43 cbkidlll [ 0.205021] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
Dec 2 13:10:43 cbkidlll [ 0.210520] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
Dec 2 13:10:43 cbkidlll [ 0.210665] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
Dec 2 13:10:43 cbkidlll [ 0.210813] pci 0000:00:1c.0: MEM window: 0xf6000000-0xf7ffffff
Dec 2 13:10:43 cbkidlll [ 0.210960] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
Dec 2 13:10:43 cbkidlll [ 0.211207] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
Dec 2 13:10:43 cbkidlll [ 0.211355] pci 0000:00:1c.2: IO window: 0x3000-0x3fff
Dec 2 13:10:43 cbkidlll [ 0.211501] pci 0000:00:1c.2: MEM window: 0xf8000000-0xf9ffffff
Dec 2 13:10:43 cbkidlll [ 0.211648] pci 0000:00:1c.2: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
Dec 2 13:10:43 cbkidlll [ 0.211890] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
Dec 2 13:10:43 cbkidlll [ 0.212037] pci 0000:00:1c.3: IO window: 0x4000-0x4fff
Dec 2 13:10:43 cbkidlll [ 0.212185] pci 0000:00:1c.3: MEM window: 0xfa000000-0xfbffffff
Dec 2 13:10:43 cbkidlll [ 0.212335] pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f5ffffff
Dec 2 13:10:43 cbkidlll [ 0.212577] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:08
Dec 2 13:10:43 cbkidlll [ 0.212723] pci 0000:00:1e.0: IO window: disabled
Dec 2 13:10:43 cbkidlll [ 0.212869] pci 0000:00:1e.0: MEM window: disabled
Dec 2 13:10:43 cbkidlll [ 0.213017] pci 0000:00:1e.0: PREFETCH window: disabled
Dec 2 13:10:43 cbkidlll [ 0.213183] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Dec 2 13:10:43 cbkidlll [ 0.213333] pci 0000:00:1c.0: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 0.213344] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Dec 2 13:10:43 cbkidlll [ 0.213494] pci 0000:00:1c.2: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 0.213506] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:10:43 cbkidlll [ 0.213653] pci 0000:00:1c.3: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 0.213663] pci 0000:00:1e.0: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 0.213668] bus: 00 index 0 io port: [0x00-0xffff]
Dec 2 13:10:43 cbkidlll [ 0.213811] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
Dec 2 13:10:43 cbkidlll [ 0.213956] bus: 02 index 0 io port: [0x2000-0x2fff]
Dec 2 13:10:43 cbkidlll [ 0.214104] bus: 02 index 1 mmio: [0xf6000000-0xf7ffffff]
Dec 2 13:10:43 cbkidlll [ 0.214249] bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff]
Dec 2 13:10:43 cbkidlll [ 0.214394] bus: 02 index 3 mmio: [0x0-0x0]
Dec 2 13:10:43 cbkidlll [ 0.214536] bus: 04 index 0 io port: [0x3000-0x3fff]
Dec 2 13:10:43 cbkidlll [ 0.214678] bus: 04 index 1 mmio: [0xf8000000-0xf9ffffff]
Dec 2 13:10:43 cbkidlll [ 0.214825] bus: 04 index 2 mmio: [0xf2000000-0xf3ffffff]
Dec 2 13:10:43 cbkidlll [ 0.214970] bus: 04 index 3 mmio: [0x0-0x0]
Dec 2 13:10:43 cbkidlll [ 0.215113] bus: 06 index 0 io port: [0x4000-0x4fff]
Dec 2 13:10:43 cbkidlll [ 0.215256] bus: 06 index 1 mmio: [0xfa000000-0xfbffffff]
Dec 2 13:10:43 cbkidlll [ 0.215401] bus: 06 index 2 mmio: [0xf4000000-0xf5ffffff]
Dec 2 13:10:43 cbkidlll [ 0.215546] bus: 06 index 3 mmio: [0x0-0x0]
Dec 2 13:10:43 cbkidlll [ 0.215689] bus: 08 index 0 mmio: [0x0-0x0]
Dec 2 13:10:43 cbkidlll [ 0.215833] bus: 08 index 1 mmio: [0x0-0x0]
Dec 2 13:10:43 cbkidlll [ 0.215976] bus: 08 index 2 mmio: [0x0-0x0]
Dec 2 13:10:43 cbkidlll [ 0.216117] bus: 08 index 3 io port: [0x00-0xffff]
Dec 2 13:10:43 cbkidlll [ 0.216263] bus: 08 index 4 mmio: [0x000000-0xffffffffffffffff]
Dec 2 13:10:43 cbkidlll [ 0.216421] NET: Registered protocol family 2
Dec 2 13:10:43 cbkidlll [ 0.226075] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
Dec 2 13:10:43 cbkidlll [ 0.226838] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
Dec 2 13:10:43 cbkidlll [ 0.228559] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Dec 2 13:10:43 cbkidlll [ 0.229461] TCP: Hash tables configured (established 131072 bind 65536)
Dec 2 13:10:43 cbkidlll [ 0.229611] TCP reno registered
Dec 2 13:10:43 cbkidlll [ 0.232138] NET: Registered protocol family 1
Dec 2 13:10:43 cbkidlll [ 0.233988] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Dec 2 13:10:43 cbkidlll [ 0.234584] audit: initializing netlink socket (disabled)
Dec 2 13:10:43 cbkidlll [ 0.234752] type=2000 audit(1228223368.233:1): initialized
Dec 2 13:10:43 cbkidlll [ 0.245019] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Dec 2 13:10:43 cbkidlll [ 0.248538] VFS: Disk quotas dquot_6.5.1
Dec 2 13:10:43 cbkidlll [ 0.248797] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Dec 2 13:10:43 cbkidlll [ 0.250010] NTFS driver 2.1.29 [Flags: R/W].
Dec 2 13:10:43 cbkidlll [ 0.250419] msgmni has been set to 1980
Dec 2 13:10:43 cbkidlll [ 0.250706] SELinux: Registering netfilter hooks
Dec 2 13:10:43 cbkidlll [ 0.251202] alg: No test for stdrng (krng)
Dec 2 13:10:43 cbkidlll [ 0.251494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Dec 2 13:10:43 cbkidlll [ 0.251727] io scheduler noop registered
Dec 2 13:10:43 cbkidlll [ 0.251867] io scheduler anticipatory registered
Dec 2 13:10:43 cbkidlll [ 0.252012] io scheduler deadline registered
Dec 2 13:10:43 cbkidlll [ 0.252308] io scheduler cfq registered (default)
Dec 2 13:10:43 cbkidlll [ 0.252466] pci 0000:00:02.0: Boot video device
Dec 2 13:10:43 cbkidlll [ 0.252478] pci 0000:00:1a.0: uhci_check_and_reset_hc: legsup = 0x1030
Dec 2 13:10:43 cbkidlll [ 0.252480] pci 0000:00:1a.0: Performing full reset
Dec 2 13:10:43 cbkidlll [ 0.252501] pci 0000:00:1a.1: uhci_check_and_reset_hc: legsup = 0x0010
Dec 2 13:10:43 cbkidlll [ 0.252504] pci 0000:00:1a.1: Performing full reset
Dec 2 13:10:43 cbkidlll [ 0.252564] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0030
Dec 2 13:10:43 cbkidlll [ 0.252567] pci 0000:00:1d.0: Performing full reset
Dec 2 13:10:43 cbkidlll [ 0.252588] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010
Dec 2 13:10:43 cbkidlll [ 0.252590] pci 0000:00:1d.1: Performing full reset
Dec 2 13:10:43 cbkidlll [ 0.252611] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010
Dec 2 13:10:43 cbkidlll [ 0.252613] pci 0000:00:1d.2: Performing full reset
Dec 2 13:10:43 cbkidlll [ 0.255298] pcieport-driver 0000:00:1c.0: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 0.255357] pcieport-driver 0000:00:1c.0: found MSI capability
Dec 2 13:10:43 cbkidlll [ 0.255538] pcieport-driver 0000:00:1c.0: irq 47 for MSI/MSI-X
Dec 2 13:10:43 cbkidlll [ 0.255557] pci_express 0000:00:1c.0:pcie00: allocate port service
Dec 2 13:10:43 cbkidlll [ 0.255616] pci_express 0000:00:1c.0:pcie02: allocate port service
Dec 2 13:10:43 cbkidlll [ 0.255664] pci_express 0000:00:1c.0:pcie03: allocate port service
Dec 2 13:10:43 cbkidlll [ 0.255788] pcieport-driver 0000:00:1c.2: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 0.255844] pcieport-driver 0000:00:1c.2: found MSI capability
Dec 2 13:10:43 cbkidlll [ 0.256021] pcieport-driver 0000:00:1c.2: irq 46 for MSI/MSI-X
Dec 2 13:10:43 cbkidlll [ 0.256040] pci_express 0000:00:1c.2:pcie00: allocate port service
Dec 2 13:10:43 cbkidlll [ 0.256089] pci_express 0000:00:1c.2:pcie02: allocate port service
Dec 2 13:10:43 cbkidlll [ 0.256138] pci_express 0000:00:1c.2:pcie03: allocate port service
Dec 2 13:10:43 cbkidlll [ 0.256271] pcieport-driver 0000:00:1c.3: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 0.256327] pcieport-driver 0000:00:1c.3: found MSI capability
Dec 2 13:10:43 cbkidlll [ 0.256504] pcieport-driver 0000:00:1c.3: irq 45 for MSI/MSI-X
Dec 2 13:10:43 cbkidlll [ 0.256523] pci_express 0000:00:1c.3:pcie00: allocate port service
Dec 2 13:10:43 cbkidlll [ 0.256571] pci_express 0000:00:1c.3:pcie02: allocate port service
Dec 2 13:10:43 cbkidlll [ 0.256619] pci_express 0000:00:1c.3:pcie03: allocate port service
Dec 2 13:10:43 cbkidlll [ 0.256815] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Dec 2 13:10:43 cbkidlll [ 0.257564] ACPI: AC Adapter [AC0] (on-line)
Dec 2 13:10:43 cbkidlll [ 0.258332] ACPI: Battery Slot [BAT0] (battery absent)
Dec 2 13:10:43 cbkidlll [ 0.258650] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
Dec 2 13:10:43 cbkidlll [ 0.258876] ACPI: Power Button (FF) [PWRF]
Dec 2 13:10:43 cbkidlll [ 0.259130] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
Dec 2 13:10:43 cbkidlll [ 0.259357] ACPI: Power Button (CM) [PWRB]
Dec 2 13:10:43 cbkidlll [ 0.259594] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
Dec 2 13:10:43 cbkidlll [ 0.259878] ACPI: Lid Switch [LID]
Dec 2 13:10:43 cbkidlll [ 0.260136] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
Dec 2 13:10:43 cbkidlll [ 0.260363] ACPI: Sleep Button (CM) [SLPB]
Dec 2 13:10:43 cbkidlll [ 0.261294] ACPI: SSDT 3F6D51D9, 01F6 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
Dec 2 13:10:43 cbkidlll [ 0.265426] ACPI: SSDT 3F6D4C62, 04F2 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Dec 2 13:10:43 cbkidlll [ 0.269755] Monitor-Mwait will be used to enter C-1 state
Dec 2 13:10:43 cbkidlll [ 0.269759] Monitor-Mwait will be used to enter C-2 state
Dec 2 13:10:43 cbkidlll [ 0.269833] ACPI: CPU0 (power states: C1[C1] C2[C2])
Dec 2 13:10:43 cbkidlll [ 0.270184] processor ACPI_CPU:00: registered as cooling_device0
Dec 2 13:10:43 cbkidlll [ 0.270327] ACPI: Processor [CPU0] (supports 8 throttling states)
Dec 2 13:10:43 cbkidlll [ 0.271113] ACPI: SSDT 3F6D53CF, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
Dec 2 13:10:43 cbkidlll [ 0.271872] ACPI: SSDT 3F6D5154, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
Dec 2 13:10:43 cbkidlll [ 0.273460] ACPI: CPU1 (power states: C1[C1] C2[C2])
Dec 2 13:10:43 cbkidlll [ 0.273800] processor ACPI_CPU:01: registered as cooling_device1
Dec 2 13:10:43 cbkidlll [ 0.273942] ACPI: Processor [CPU1] (supports 8 throttling states)
Dec 2 13:10:43 cbkidlll [ 0.277765] thermal LNXTHERM:01: registered as thermal_zone0
Dec 2 13:10:43 cbkidlll [ 0.279005] ACPI: Thermal Zone [THRM] (55 C)
Dec 2 13:10:43 cbkidlll [ 0.294379] Non-volatile memory driver v1.2
Dec 2 13:10:43 cbkidlll [ 0.296866] Linux agpgart interface v0.103
Dec 2 13:10:43 cbkidlll [ 0.297024] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
Dec 2 13:10:43 cbkidlll [ 0.297597] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
Dec 2 13:10:43 cbkidlll [ 0.301126] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
Dec 2 13:10:43 cbkidlll [ 0.301387] [drm] Initialized drm 1.1.0 20060810
Dec 2 13:10:43 cbkidlll [ 0.301599] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 2 13:10:43 cbkidlll [ 0.301742] pci 0000:00:02.0: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 0.301945] [drm] Initialized i915 1.6.0 20080730 on minor 0
Dec 2 13:10:43 cbkidlll [ 0.302116] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
Dec 2 13:10:43 cbkidlll [ 0.304969] brd: module loaded
Dec 2 13:10:43 cbkidlll [ 0.306180] loop: module loaded
Dec 2 13:10:43 cbkidlll [ 0.306317] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
Dec 2 13:10:43 cbkidlll [ 0.306457] Copyright (c) 1999-2006 Intel Corporation.
Dec 2 13:10:43 cbkidlll [ 0.306679] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
Dec 2 13:10:43 cbkidlll [ 0.306830] e100: Copyright(c) 1999-2006 Intel Corporation
Dec 2 13:10:43 cbkidlll [ 0.307080] sky2 driver version 1.22
Dec 2 13:10:43 cbkidlll [ 0.307386] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Dec 2 13:10:43 cbkidlll [ 0.307551] r8169 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:10:43 cbkidlll [ 0.307715] r8169 0000:06:00.0: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 0.307861] r8169 0000:06:00.0: irq 44 for MSI/MSI-X
Dec 2 13:10:43 cbkidlll [ 0.308189] eth0: RTL8101e at 0xffffc200001fe000, 00:03:0d:60:b4:d1, XID 34000000 IRQ 44
Dec 2 13:10:43 cbkidlll [ 0.309415] console [netcon0] enabled
Dec 2 13:10:43 cbkidlll [ 0.309551] netconsole: network logging started
Dec 2 13:10:43 cbkidlll [ 0.309785] input: Macintosh mouse button emulation as /devices/virtual/input/input4
Dec 2 13:10:43 cbkidlll [ 0.310029] Uniform Multi-Platform E-IDE driver
Dec 2 13:10:43 cbkidlll [ 0.310279] ide-gd driver 1.18
Dec 2 13:10:43 cbkidlll [ 0.310538] Loading iSCSI transport class v2.0-870.
Dec 2 13:10:43 cbkidlll [ 0.310986] Driver 'sd' needs updating - please use bus_type methods
Dec 2 13:10:43 cbkidlll [ 0.311169] Driver 'sr' needs updating - please use bus_type methods
Dec 2 13:10:43 cbkidlll [ 0.311493] ata_piix 0000:00:1f.1: version 2.12
Dec 2 13:10:43 cbkidlll [ 0.311507] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:10:43 cbkidlll [ 0.311690] ata_piix 0000:00:1f.1: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 0.311780] scsi0 : ata_piix
Dec 2 13:10:43 cbkidlll [ 0.312099] scsi1 : ata_piix
Dec 2 13:10:43 cbkidlll [ 0.313266] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
Dec 2 13:10:43 cbkidlll [ 0.313409] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
Dec 2 13:10:43 cbkidlll [ 0.483259] ata1.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, CH00, max UDMA/33
Dec 2 13:10:43 cbkidlll [ 0.501770] Switched to high resolution mode on CPU 0
Dec 2 13:10:43 cbkidlll [ 0.501773] Switched to high resolution mode on CPU 1
Dec 2 13:10:43 cbkidlll [ 0.540436] ata1.00: configured for UDMA/33
Dec 2 13:10:43 cbkidlll [ 0.714447] isa bounce pool size: 16 pages
Dec 2 13:10:43 cbkidlll [ 0.747937] scsi 0:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D CH00 PQ: 0 ANSI: 5
Dec 2 13:10:43 cbkidlll [ 0.835228] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Dec 2 13:10:43 cbkidlll [ 0.835371] Uniform CD-ROM driver Revision: 3.20
Dec 2 13:10:43 cbkidlll [ 0.835740] sr 0:0:0:0: Attached scsi CD-ROM sr0
Dec 2 13:10:43 cbkidlll [ 0.835872] sr 0:0:0:0: Attached scsi generic sg0 type 5
Dec 2 13:10:43 cbkidlll [ 0.836120] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:10:43 cbkidlll [ 0.836266] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Dec 2 13:10:43 cbkidlll [ 0.987052] ata_piix 0000:00:1f.2: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 0.987127] scsi2 : ata_piix
Dec 2 13:10:43 cbkidlll [ 0.987417] scsi3 : ata_piix
Dec 2 13:10:43 cbkidlll [ 0.989319] ata3: SATA max UDMA/133 cmd 0x1c00 ctl 0x18f4 bmdma 0x18e0 irq 19
Dec 2 13:10:43 cbkidlll [ 0.989469] ata4: SATA max UDMA/133 cmd 0x18f8 ctl 0x18f0 bmdma 0x18e8 irq 19
Dec 2 13:10:43 cbkidlll [ 1.750108] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Dec 2 13:10:43 cbkidlll [ 1.750265] ata3.01: SATA link down (SStatus 0 SControl 300)
Dec 2 13:10:43 cbkidlll [ 1.753527] ata3.00: ATA-7: Hitachi HTS541610J9SA00, SBCAC7MP, max UDMA/133
Dec 2 13:10:43 cbkidlll [ 1.753671] ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
Dec 2 13:10:43 cbkidlll [ 1.759548] ata3.00: configured for UDMA/133
Dec 2 13:10:43 cbkidlll [ 2.380415] ata4.00: SATA link down (SStatus 0 SControl 300)
Dec 2 13:10:43 cbkidlll [ 2.380567] ata4.01: SATA link down (SStatus 0 SControl 0)
Dec 2 13:10:43 cbkidlll [ 2.380810] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54161 SBCA PQ: 0 ANSI: 5
Dec 2 13:10:43 cbkidlll [ 2.381283] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
Dec 2 13:10:43 cbkidlll [ 2.381526] sd 2:0:0:0: [sda] Write Protect is off
Dec 2 13:10:43 cbkidlll [ 2.381664] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 2 13:10:43 cbkidlll [ 2.381698] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 2 13:10:43 cbkidlll [ 2.382007] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
Dec 2 13:10:43 cbkidlll [ 2.382249] sd 2:0:0:0: [sda] Write Protect is off
Dec 2 13:10:43 cbkidlll [ 2.382388] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 2 13:10:43 cbkidlll [ 2.382421] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 2 13:10:43 cbkidlll [ 2.382649] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
Dec 2 13:10:43 cbkidlll [ 2.869246] sd 2:0:0:0: [sda] Attached SCSI disk
Dec 2 13:10:43 cbkidlll [ 2.869524] sd 2:0:0:0: Attached scsi generic sg1 type 0
Dec 2 13:10:43 cbkidlll [ 2.870120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Dec 2 13:10:43 cbkidlll [ 2.870270] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
Dec 2 13:10:43 cbkidlll [ 2.870303] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Dec 2 13:10:43 cbkidlll [ 2.870471] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 2.870476] ehci_hcd 0000:00:1a.7: EHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.870692] drivers/usb/core/inode.c: creating file 'devices'
Dec 2 13:10:43 cbkidlll [ 2.870698] drivers/usb/core/inode.c: creating file '001'
Dec 2 13:10:43 cbkidlll [ 2.870768] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
Dec 2 13:10:43 cbkidlll [ 2.870998] ehci_hcd 0000:00:1a.7: reset hcs_params 0x102204 dbg=1 cc=2 pcc=2 ordered !ppc ports=4
Dec 2 13:10:43 cbkidlll [ 2.871004] ehci_hcd 0000:00:1a.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
Dec 2 13:10:43 cbkidlll [ 2.871030] ehci_hcd 0000:00:1a.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
Dec 2 13:10:43 cbkidlll [ 2.874920] ehci_hcd 0000:00:1a.7: debug port 1
Dec 2 13:10:43 cbkidlll [ 2.875063] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
Dec 2 13:10:43 cbkidlll [ 2.875066] ehci_hcd 0000:00:1a.7: supports USB remote wakeup
Dec 2 13:10:43 cbkidlll [ 2.875085] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc404000
Dec 2 13:10:43 cbkidlll [ 2.875227] ehci_hcd 0000:00:1a.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Dec 2 13:10:43 cbkidlll [ 2.879119] ehci_hcd 0000:00:1a.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
Dec 2 13:10:43 cbkidlll [ 2.884011] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Dec 2 13:10:43 cbkidlll [ 2.884185] usb usb1: default language 0x0409
Dec 2 13:10:43 cbkidlll [ 2.884237] usb usb1: uevent
Dec 2 13:10:43 cbkidlll [ 2.884292] usb usb1: usb_probe_device
Dec 2 13:10:43 cbkidlll [ 2.884295] usb usb1: configuration #1 chosen from 1 choice
Dec 2 13:10:43 cbkidlll [ 2.884439] usb usb1: adding 1-0:1.0 (config #1, interface 0)
Dec 2 13:10:43 cbkidlll [ 2.884459] usb 1-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 2.884504] hub 1-0:1.0: usb_probe_interface
Dec 2 13:10:43 cbkidlll [ 2.884507] hub 1-0:1.0: usb_probe_interface - got id
Dec 2 13:10:43 cbkidlll [ 2.884510] hub 1-0:1.0: USB hub found
Dec 2 13:10:43 cbkidlll [ 2.884653] hub 1-0:1.0: 4 ports detected
Dec 2 13:10:43 cbkidlll [ 2.884789] hub 1-0:1.0: standalone hub
Dec 2 13:10:43 cbkidlll [ 2.884791] hub 1-0:1.0: no power switching (usb 1.0)
Dec 2 13:10:43 cbkidlll [ 2.884793] hub 1-0:1.0: individual port over-current protection
Dec 2 13:10:43 cbkidlll [ 2.884795] hub 1-0:1.0: power on to power good time: 20ms
Dec 2 13:10:43 cbkidlll [ 2.884801] hub 1-0:1.0: local power source is good
Dec 2 13:10:43 cbkidlll [ 2.884804] hub 1-0:1.0: trying to enable port power on non-switchable hub
Dec 2 13:10:43 cbkidlll [ 2.884944] drivers/usb/core/inode.c: creating file '001'
Dec 2 13:10:43 cbkidlll [ 2.885027] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Dec 2 13:10:43 cbkidlll [ 2.885169] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 2 13:10:43 cbkidlll [ 2.885398] usb usb1: Product: EHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.885536] usb usb1: Manufacturer: Linux 2.6.28-rc6 ehci_hcd
Dec 2 13:10:43 cbkidlll [ 2.885676] usb usb1: SerialNumber: 0000:00:1a.7
Dec 2 13:10:43 cbkidlll [ 2.885843] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Dec 2 13:10:43 cbkidlll [ 2.886004] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 2.886008] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.886207] drivers/usb/core/inode.c: creating file '002'
Dec 2 13:10:43 cbkidlll [ 2.886281] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
Dec 2 13:10:43 cbkidlll [ 2.886512] ehci_hcd 0000:00:1d.7: reset hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6
Dec 2 13:10:43 cbkidlll [ 2.886517] ehci_hcd 0000:00:1d.7: reset hcc_params 16871 thresh 7 uframes 1024 64 bit addr
Dec 2 13:10:43 cbkidlll [ 2.886541] ehci_hcd 0000:00:1d.7: reset command 080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
Dec 2 13:10:43 cbkidlll [ 2.890424] ehci_hcd 0000:00:1d.7: debug port 1
Dec 2 13:10:43 cbkidlll [ 2.890571] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
Dec 2 13:10:43 cbkidlll [ 2.890573] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
Dec 2 13:10:43 cbkidlll [ 2.890590] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc404400
Dec 2 13:10:43 cbkidlll [ 2.890733] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Dec 2 13:10:43 cbkidlll [ 2.894623] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN
Dec 2 13:10:43 cbkidlll [ 2.900010] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
Dec 2 13:10:43 cbkidlll [ 2.900187] usb usb2: default language 0x0409
Dec 2 13:10:43 cbkidlll [ 2.900239] usb usb2: uevent
Dec 2 13:10:43 cbkidlll [ 2.900294] usb usb2: usb_probe_device
Dec 2 13:10:43 cbkidlll [ 2.900297] usb usb2: configuration #1 chosen from 1 choice
Dec 2 13:10:43 cbkidlll [ 2.900442] usb usb2: adding 2-0:1.0 (config #1, interface 0)
Dec 2 13:10:43 cbkidlll [ 2.900462] usb 2-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 2.900505] hub 2-0:1.0: usb_probe_interface
Dec 2 13:10:43 cbkidlll [ 2.900507] hub 2-0:1.0: usb_probe_interface - got id
Dec 2 13:10:43 cbkidlll [ 2.900510] hub 2-0:1.0: USB hub found
Dec 2 13:10:43 cbkidlll [ 2.900652] hub 2-0:1.0: 6 ports detected
Dec 2 13:10:43 cbkidlll [ 2.900789] hub 2-0:1.0: standalone hub
Dec 2 13:10:43 cbkidlll [ 2.900791] hub 2-0:1.0: no power switching (usb 1.0)
Dec 2 13:10:43 cbkidlll [ 2.900793] hub 2-0:1.0: individual port over-current protection
Dec 2 13:10:43 cbkidlll [ 2.900796] hub 2-0:1.0: power on to power good time: 20ms
Dec 2 13:10:43 cbkidlll [ 2.900801] hub 2-0:1.0: local power source is good
Dec 2 13:10:43 cbkidlll [ 2.900804] hub 2-0:1.0: trying to enable port power on non-switchable hub
Dec 2 13:10:43 cbkidlll [ 2.900902] drivers/usb/core/inode.c: creating file '001'
Dec 2 13:10:43 cbkidlll [ 2.900985] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Dec 2 13:10:43 cbkidlll [ 2.901127] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 2 13:10:43 cbkidlll [ 2.901355] usb usb2: Product: EHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.901495] usb usb2: Manufacturer: Linux 2.6.28-rc6 ehci_hcd
Dec 2 13:10:43 cbkidlll [ 2.901634] usb usb2: SerialNumber: 0000:00:1d.7
Dec 2 13:10:43 cbkidlll [ 2.901829] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Dec 2 13:10:43 cbkidlll [ 2.901971] ohci_hcd: block sizes: ed 80 td 96
Dec 2 13:10:43 cbkidlll [ 2.902034] uhci_hcd: USB Universal Host Controller Interface driver
Dec 2 13:10:43 cbkidlll [ 2.902226] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Dec 2 13:10:43 cbkidlll [ 2.902381] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 2.902386] uhci_hcd 0000:00:1a.0: UHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.902584] drivers/usb/core/inode.c: creating file '003'
Dec 2 13:10:43 cbkidlll [ 2.902662] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
Dec 2 13:10:43 cbkidlll [ 2.902895] uhci_hcd 0000:00:1a.0: detected 2 ports
Dec 2 13:10:43 cbkidlll [ 2.903038] uhci_hcd 0000:00:1a.0: uhci_check_and_reset_hc: cmd = 0x0000
Dec 2 13:10:43 cbkidlll [ 2.903041] uhci_hcd 0000:00:1a.0: Performing full reset
Dec 2 13:10:43 cbkidlll [ 2.903059] uhci_hcd 0000:00:1a.0: supports USB remote wakeup
Dec 2 13:10:43 cbkidlll [ 2.903076] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
Dec 2 13:10:43 cbkidlll [ 2.903265] usb usb3: default language 0x0409
Dec 2 13:10:43 cbkidlll [ 2.903317] usb usb3: uevent
Dec 2 13:10:43 cbkidlll [ 2.903363] usb usb3: usb_probe_device
Dec 2 13:10:43 cbkidlll [ 2.903366] usb usb3: configuration #1 chosen from 1 choice
Dec 2 13:10:43 cbkidlll [ 2.903509] usb usb3: adding 3-0:1.0 (config #1, interface 0)

复制代码

cbkid · 发表于 2008-12-2 13:50:59

Dec 2 13:10:43 cbkidlll [ 2.903529] usb 3-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 2.903572] hub 3-0:1.0: usb_probe_interface
Dec 2 13:10:43 cbkidlll [ 2.903575] hub 3-0:1.0: usb_probe_interface - got id
Dec 2 13:10:43 cbkidlll [ 2.903577] hub 3-0:1.0: USB hub found
Dec 2 13:10:43 cbkidlll [ 2.903722] hub 3-0:1.0: 2 ports detected
Dec 2 13:10:43 cbkidlll [ 2.903859] hub 3-0:1.0: standalone hub
Dec 2 13:10:43 cbkidlll [ 2.903861] hub 3-0:1.0: no power switching (usb 1.0)
Dec 2 13:10:43 cbkidlll [ 2.903863] hub 3-0:1.0: individual port over-current protection
Dec 2 13:10:43 cbkidlll [ 2.903865] hub 3-0:1.0: power on to power good time: 2ms
Dec 2 13:10:43 cbkidlll [ 2.903870] hub 3-0:1.0: local power source is good
Dec 2 13:10:43 cbkidlll [ 2.903873] hub 3-0:1.0: trying to enable port power on non-switchable hub
Dec 2 13:10:43 cbkidlll [ 2.903949] drivers/usb/core/inode.c: creating file '001'
Dec 2 13:10:43 cbkidlll [ 2.904034] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Dec 2 13:10:43 cbkidlll [ 2.904177] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 2 13:10:43 cbkidlll [ 2.904407] usb usb3: Product: UHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.904545] usb usb3: Manufacturer: Linux 2.6.28-rc6 uhci_hcd
Dec 2 13:10:43 cbkidlll [ 2.904686] usb usb3: SerialNumber: 0000:00:1a.0
Dec 2 13:10:43 cbkidlll [ 2.904853] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Dec 2 13:10:43 cbkidlll [ 2.905002] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 2.905006] uhci_hcd 0000:00:1a.1: UHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.905205] drivers/usb/core/inode.c: creating file '004'
Dec 2 13:10:43 cbkidlll [ 2.905279] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
Dec 2 13:10:43 cbkidlll [ 2.905512] uhci_hcd 0000:00:1a.1: detected 2 ports
Dec 2 13:10:43 cbkidlll [ 2.905653] uhci_hcd 0000:00:1a.1: uhci_check_and_reset_hc: cmd = 0x0000
Dec 2 13:10:43 cbkidlll [ 2.905656] uhci_hcd 0000:00:1a.1: Performing full reset
Dec 2 13:10:43 cbkidlll [ 2.905675] uhci_hcd 0000:00:1a.1: supports USB remote wakeup
Dec 2 13:10:43 cbkidlll [ 2.905690] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
Dec 2 13:10:43 cbkidlll [ 2.905874] usb usb4: default language 0x0409
Dec 2 13:10:43 cbkidlll [ 2.905924] usb usb4: uevent
Dec 2 13:10:43 cbkidlll [ 2.905971] usb usb4: usb_probe_device
Dec 2 13:10:43 cbkidlll [ 2.905974] usb usb4: configuration #1 chosen from 1 choice
Dec 2 13:10:43 cbkidlll [ 2.906119] usb usb4: adding 4-0:1.0 (config #1, interface 0)
Dec 2 13:10:43 cbkidlll [ 2.906139] usb 4-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 2.906185] hub 4-0:1.0: usb_probe_interface
Dec 2 13:10:43 cbkidlll [ 2.906188] hub 4-0:1.0: usb_probe_interface - got id
Dec 2 13:10:43 cbkidlll [ 2.906190] hub 4-0:1.0: USB hub found
Dec 2 13:10:43 cbkidlll [ 2.906344] hub 4-0:1.0: 2 ports detected
Dec 2 13:10:43 cbkidlll [ 2.906481] hub 4-0:1.0: standalone hub
Dec 2 13:10:43 cbkidlll [ 2.906483] hub 4-0:1.0: no power switching (usb 1.0)
Dec 2 13:10:43 cbkidlll [ 2.906486] hub 4-0:1.0: individual port over-current protection
Dec 2 13:10:43 cbkidlll [ 2.906488] hub 4-0:1.0: power on to power good time: 2ms
Dec 2 13:10:43 cbkidlll [ 2.906493] hub 4-0:1.0: local power source is good
Dec 2 13:10:43 cbkidlll [ 2.906496] hub 4-0:1.0: trying to enable port power on non-switchable hub
Dec 2 13:10:43 cbkidlll [ 2.906578] drivers/usb/core/inode.c: creating file '001'
Dec 2 13:10:43 cbkidlll [ 2.906658] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
Dec 2 13:10:43 cbkidlll [ 2.906800] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 2 13:10:43 cbkidlll [ 2.907024] usb usb4: Product: UHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.907162] usb usb4: Manufacturer: Linux 2.6.28-rc6 uhci_hcd
Dec 2 13:10:43 cbkidlll [ 2.907306] usb usb4: SerialNumber: 0000:00:1a.1
Dec 2 13:10:43 cbkidlll [ 2.907474] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Dec 2 13:10:43 cbkidlll [ 2.907622] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 2.907626] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.907822] drivers/usb/core/inode.c: creating file '005'
Dec 2 13:10:43 cbkidlll [ 2.907903] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
Dec 2 13:10:43 cbkidlll [ 2.908133] uhci_hcd 0000:00:1d.0: detected 2 ports
Dec 2 13:10:43 cbkidlll [ 2.908279] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
Dec 2 13:10:43 cbkidlll [ 2.908282] uhci_hcd 0000:00:1d.0: Performing full reset
Dec 2 13:10:43 cbkidlll [ 2.908301] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
Dec 2 13:10:43 cbkidlll [ 2.908307] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
Dec 2 13:10:43 cbkidlll [ 2.908490] usb usb5: default language 0x0409
Dec 2 13:10:43 cbkidlll [ 2.908538] usb usb5: uevent
Dec 2 13:10:43 cbkidlll [ 2.908586] usb usb5: usb_probe_device
Dec 2 13:10:43 cbkidlll [ 2.908589] usb usb5: configuration #1 chosen from 1 choice
Dec 2 13:10:43 cbkidlll [ 2.908732] usb usb5: adding 5-0:1.0 (config #1, interface 0)
Dec 2 13:10:43 cbkidlll [ 2.908752] usb 5-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 2.908795] hub 5-0:1.0: usb_probe_interface
Dec 2 13:10:43 cbkidlll [ 2.908798] hub 5-0:1.0: usb_probe_interface - got id
Dec 2 13:10:43 cbkidlll [ 2.908800] hub 5-0:1.0: USB hub found
Dec 2 13:10:43 cbkidlll [ 2.908942] hub 5-0:1.0: 2 ports detected
Dec 2 13:10:43 cbkidlll [ 2.909082] hub 5-0:1.0: standalone hub
Dec 2 13:10:43 cbkidlll [ 2.909083] hub 5-0:1.0: no power switching (usb 1.0)
Dec 2 13:10:43 cbkidlll [ 2.909086] hub 5-0:1.0: individual port over-current protection
Dec 2 13:10:43 cbkidlll [ 2.909088] hub 5-0:1.0: power on to power good time: 2ms
Dec 2 13:10:43 cbkidlll [ 2.909093] hub 5-0:1.0: local power source is good
Dec 2 13:10:43 cbkidlll [ 2.909096] hub 5-0:1.0: trying to enable port power on non-switchable hub
Dec 2 13:10:43 cbkidlll [ 2.909180] drivers/usb/core/inode.c: creating file '001'
Dec 2 13:10:43 cbkidlll [ 2.909266] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
Dec 2 13:10:43 cbkidlll [ 2.909409] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 2 13:10:43 cbkidlll [ 2.909633] usb usb5: Product: UHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.909770] usb usb5: Manufacturer: Linux 2.6.28-rc6 uhci_hcd
Dec 2 13:10:43 cbkidlll [ 2.909910] usb usb5: SerialNumber: 0000:00:1d.0
Dec 2 13:10:43 cbkidlll [ 2.910072] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:10:43 cbkidlll [ 2.910221] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 2.910225] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.910431] drivers/usb/core/inode.c: creating file '006'
Dec 2 13:10:43 cbkidlll [ 2.910501] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
Dec 2 13:10:43 cbkidlll [ 2.910731] uhci_hcd 0000:00:1d.1: detected 2 ports
Dec 2 13:10:43 cbkidlll [ 2.910873] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
Dec 2 13:10:43 cbkidlll [ 2.910876] uhci_hcd 0000:00:1d.1: Performing full reset
Dec 2 13:10:43 cbkidlll [ 2.910894] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
Dec 2 13:10:43 cbkidlll [ 2.910901] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
Dec 2 13:10:43 cbkidlll [ 2.911085] usb usb6: default language 0x0409
Dec 2 13:10:43 cbkidlll [ 2.911133] usb usb6: uevent
Dec 2 13:10:43 cbkidlll [ 2.911179] usb usb6: usb_probe_device
Dec 2 13:10:43 cbkidlll [ 2.911182] usb usb6: configuration #1 chosen from 1 choice
Dec 2 13:10:43 cbkidlll [ 2.911331] usb usb6: adding 6-0:1.0 (config #1, interface 0)
Dec 2 13:10:43 cbkidlll [ 2.911355] usb 6-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 2.911399] hub 6-0:1.0: usb_probe_interface
Dec 2 13:10:43 cbkidlll [ 2.911402] hub 6-0:1.0: usb_probe_interface - got id
Dec 2 13:10:43 cbkidlll [ 2.911404] hub 6-0:1.0: USB hub found
Dec 2 13:10:43 cbkidlll [ 2.911546] hub 6-0:1.0: 2 ports detected
Dec 2 13:10:43 cbkidlll [ 2.911683] hub 6-0:1.0: standalone hub
Dec 2 13:10:43 cbkidlll [ 2.911684] hub 6-0:1.0: no power switching (usb 1.0)
Dec 2 13:10:43 cbkidlll [ 2.911687] hub 6-0:1.0: individual port over-current protection
Dec 2 13:10:43 cbkidlll [ 2.911689] hub 6-0:1.0: power on to power good time: 2ms
Dec 2 13:10:43 cbkidlll [ 2.911694] hub 6-0:1.0: local power source is good
Dec 2 13:10:43 cbkidlll [ 2.911697] hub 6-0:1.0: trying to enable port power on non-switchable hub
Dec 2 13:10:43 cbkidlll [ 2.911771] drivers/usb/core/inode.c: creating file '001'
Dec 2 13:10:43 cbkidlll [ 2.911851] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
Dec 2 13:10:43 cbkidlll [ 2.911992] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 2 13:10:43 cbkidlll [ 2.912217] usb usb6: Product: UHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.912359] usb usb6: Manufacturer: Linux 2.6.28-rc6 uhci_hcd
Dec 2 13:10:43 cbkidlll [ 2.912498] usb usb6: SerialNumber: 0000:00:1d.1
Dec 2 13:10:43 cbkidlll [ 2.912662] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Dec 2 13:10:43 cbkidlll [ 2.912810] uhci_hcd 0000:00:1d.2: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 2.912814] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.913027] drivers/usb/core/inode.c: creating file '007'
Dec 2 13:10:43 cbkidlll [ 2.913105] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
Dec 2 13:10:43 cbkidlll [ 2.913342] uhci_hcd 0000:00:1d.2: detected 2 ports
Dec 2 13:10:43 cbkidlll [ 2.913483] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
Dec 2 13:10:43 cbkidlll [ 2.913485] uhci_hcd 0000:00:1d.2: Performing full reset
Dec 2 13:10:43 cbkidlll [ 2.913504] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
Dec 2 13:10:43 cbkidlll [ 2.913510] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
Dec 2 13:10:43 cbkidlll [ 2.913692] usb usb7: default language 0x0409
Dec 2 13:10:43 cbkidlll [ 2.913743] usb usb7: uevent
Dec 2 13:10:43 cbkidlll [ 2.913791] usb usb7: usb_probe_device
Dec 2 13:10:43 cbkidlll [ 2.913794] usb usb7: configuration #1 chosen from 1 choice
Dec 2 13:10:43 cbkidlll [ 2.913937] usb usb7: adding 7-0:1.0 (config #1, interface 0)
Dec 2 13:10:43 cbkidlll [ 2.913957] usb 7-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 2.914002] hub 7-0:1.0: usb_probe_interface
Dec 2 13:10:43 cbkidlll [ 2.914004] hub 7-0:1.0: usb_probe_interface - got id
Dec 2 13:10:43 cbkidlll [ 2.914007] hub 7-0:1.0: USB hub found
Dec 2 13:10:43 cbkidlll [ 2.914150] hub 7-0:1.0: 2 ports detected
Dec 2 13:10:43 cbkidlll [ 2.914290] hub 7-0:1.0: standalone hub
Dec 2 13:10:43 cbkidlll [ 2.914292] hub 7-0:1.0: no power switching (usb 1.0)
Dec 2 13:10:43 cbkidlll [ 2.914294] hub 7-0:1.0: individual port over-current protection
Dec 2 13:10:43 cbkidlll [ 2.914297] hub 7-0:1.0: power on to power good time: 2ms
Dec 2 13:10:43 cbkidlll [ 2.914302] hub 7-0:1.0: local power source is good
Dec 2 13:10:43 cbkidlll [ 2.914305] hub 7-0:1.0: trying to enable port power on non-switchable hub
Dec 2 13:10:43 cbkidlll [ 2.914387] drivers/usb/core/inode.c: creating file '001'
Dec 2 13:10:43 cbkidlll [ 2.914479] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
Dec 2 13:10:43 cbkidlll [ 2.914620] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Dec 2 13:10:43 cbkidlll [ 2.914844] usb usb7: Product: UHCI Host Controller
Dec 2 13:10:43 cbkidlll [ 2.914982] usb usb7: Manufacturer: Linux 2.6.28-rc6 uhci_hcd
Dec 2 13:10:43 cbkidlll [ 2.915122] usb usb7: SerialNumber: 0000:00:1d.2
Dec 2 13:10:43 cbkidlll [ 2.915389] usbcore: registered new interface driver usblp
Dec 2 13:10:43 cbkidlll [ 2.917872] Initializing USB Mass Storage driver...
Dec 2 13:10:43 cbkidlll [ 2.918085] usbcore: registered new interface driver usb-storage
Dec 2 13:10:43 cbkidlll [ 2.918226] USB Mass Storage support registered.
Dec 2 13:10:43 cbkidlll [ 2.918447] usbcore: registered new interface driver libusual
Dec 2 13:10:43 cbkidlll [ 2.918704] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
Dec 2 13:10:43 cbkidlll [ 2.923506] i8042.c: Detected active multiplexing controller, rev 1.1.
Dec 2 13:10:43 cbkidlll [ 2.926540] serio: i8042 KBD port at 0x60,0x64 irq 1
Dec 2 13:10:43 cbkidlll [ 2.926683] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Dec 2 13:10:43 cbkidlll [ 2.926829] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Dec 2 13:10:43 cbkidlll [ 2.926972] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Dec 2 13:10:43 cbkidlll [ 2.927117] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Dec 2 13:10:43 cbkidlll [ 2.932067] mice: PS/2 mouse device common for all mice
Dec 2 13:10:43 cbkidlll [ 2.947337] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Dec 2 13:10:43 cbkidlll [ 2.947513] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
Dec 2 13:10:43 cbkidlll [ 2.947733] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
Dec 2 13:10:43 cbkidlll [ 2.947960] ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI region SMBI [0x1c20-0x1c2f]
Dec 2 13:10:43 cbkidlll [ 2.948193] ACPI: Device needs an ACPI driver
Dec 2 13:10:43 cbkidlll [ 2.948661] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
Dec 2 13:10:43 cbkidlll [ 2.949217] cpuidle: using governor ladder
Dec 2 13:10:43 cbkidlll [ 2.949861] cpuidle: using governor menu
Dec 2 13:10:43 cbkidlll [ 2.950023] No iBFT detected.
Dec 2 13:10:43 cbkidlll [ 2.950254] Marking TSC unstable due to TSC halts in idle
Dec 2 13:10:43 cbkidlll [ 2.952110] usbcore: registered new interface driver hiddev
Dec 2 13:10:43 cbkidlll [ 2.952339] usbcore: registered new interface driver usbhid
Dec 2 13:10:43 cbkidlll [ 2.952480] usbhid: v2.6:USB HID core driver
Dec 2 13:10:43 cbkidlll [ 2.952708] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
Dec 2 13:10:43 cbkidlll [ 2.953463] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Dec 2 13:10:43 cbkidlll [ 2.953741] HDA Intel 0000:00:1b.0: setting latency timer to 64
Dec 2 13:10:43 cbkidlll [ 2.963412] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
Dec 2 13:10:43 cbkidlll [ 2.980016] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
Dec 2 13:10:43 cbkidlll [ 2.984293] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
Dec 2 13:10:43 cbkidlll [ 2.984299] hub 1-0:1.0: port 1: status 0501 change 0001
Dec 2 13:10:43 cbkidlll [ 2.991177] ALSA device list:
Dec 2 13:10:43 cbkidlll [ 2.991335] #0: HDA Intel at 0xfc400000 irq 22
Dec 2 13:10:43 cbkidlll [ 2.991614] Netfilter messages via NETLINK v0.30.
Dec 2 13:10:43 cbkidlll [ 2.991771] nf_conntrack version 0.5.0 (8118 buckets, 32472 max)
Dec 2 13:10:43 cbkidlll [ 2.992266] ctnetlink v0.93: registering with nfnetlink.
Dec 2 13:10:43 cbkidlll [ 2.993186] ip_tables: (C) 2000-2006 Netfilter Core Team
Dec 2 13:10:43 cbkidlll [ 2.993370] TCP cubic registered
Dec 2 13:10:43 cbkidlll [ 2.993508] Initializing XFRM netlink socket
Dec 2 13:10:43 cbkidlll [ 2.993804] NET: Registered protocol family 10
Dec 2 13:10:43 cbkidlll [ 2.995214] ip6_tables: (C) 2000-2006 Netfilter Core Team
Dec 2 13:10:43 cbkidlll [ 2.995449] IPv6 over IPv4 tunneling driver
Dec 2 13:10:43 cbkidlll [ 2.996454] NET: Registered protocol family 17
Dec 2 13:10:43 cbkidlll [ 2.996899] RPC: Registered udp transport module.
Dec 2 13:10:43 cbkidlll [ 2.997061] RPC: Registered tcp transport module.
Dec 2 13:10:43 cbkidlll [ 2.998169] registered taskstats version 1
Dec 2 13:10:43 cbkidlll [ 2.998495] Magic number: 4:181:179
Dec 2 13:10:43 cbkidlll [ 2.998712] acpi device:0f: hash matches
Dec 2 13:10:43 cbkidlll [ 3.000303] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
Dec 2 13:10:43 cbkidlll [ 3.000309] hub 2-0:1.0: port 1: status 0501 change 0001
Dec 2 13:10:43 cbkidlll [ 3.003287] uhci_hcd 0000:00:1a.0: port 1 portsc 008a,00
Dec 2 13:10:43 cbkidlll [ 3.006056] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
Dec 2 13:10:43 cbkidlll [ 3.009042] uhci_hcd 0000:00:1d.0: port 1 portsc 008a,00
Dec 2 13:10:43 cbkidlll [ 3.011051] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000
Dec 2 13:10:43 cbkidlll [ 3.014051] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
Dec 2 13:10:43 cbkidlll [ 3.084050] hub 1-0:1.0: state 7 ports 4 chg 0002 evt 0000
Dec 2 13:10:43 cbkidlll [ 3.084057] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
Dec 2 13:10:43 cbkidlll [ 3.084067] ehci_hcd 0000:00:1a.7: port 1 low speed --> companion
Dec 2 13:10:43 cbkidlll [ 3.135038] ehci_hcd 0000:00:1a.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
Dec 2 13:10:43 cbkidlll [ 3.135061] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0002
Dec 2 13:10:43 cbkidlll [ 3.135068] hub 2-0:1.0: state 7 ports 6 chg 0002 evt 0000
Dec 2 13:10:43 cbkidlll [ 3.135075] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
Dec 2 13:10:43 cbkidlll [ 3.135081] ehci_hcd 0000:00:1d.7: port 1 low speed --> companion
Dec 2 13:10:43 cbkidlll [ 3.186040] ehci_hcd 0000:00:1d.7: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
Dec 2 13:10:43 cbkidlll [ 3.186061] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0002
Dec 2 13:10:43 cbkidlll [ 3.186069] uhci_hcd 0000:00:1a.0: port 1 portsc 01a3,00
Dec 2 13:10:43 cbkidlll [ 3.186077] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
Dec 2 13:10:43 cbkidlll [ 3.290050] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
Dec 2 13:10:43 cbkidlll [ 3.392294] usb 3-1: new low speed USB device using uhci_hcd and address 2
Dec 2 13:10:43 cbkidlll [ 3.538278] usb 3-1: skipped 1 descriptor after interface
Dec 2 13:10:43 cbkidlll [ 3.538282] usb 3-1: skipped 1 descriptor after interface
Dec 2 13:10:43 cbkidlll [ 3.538339] usb 3-1: uevent
Dec 2 13:10:43 cbkidlll [ 3.538454] usb 3-1: usb_probe_device
Dec 2 13:10:43 cbkidlll [ 3.538457] usb 3-1: configuration #1 chosen from 1 choice
Dec 2 13:10:43 cbkidlll [ 3.541279] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
Dec 2 13:10:43 cbkidlll [ 3.541305] usb 3-1:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 3.541387] usbhid 3-1:1.0: usb_probe_interface
Dec 2 13:10:43 cbkidlll [ 3.541389] usbhid 3-1:1.0: usb_probe_interface - got id
Dec 2 13:10:43 cbkidlll [ 3.554708] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input6
Dec 2 13:10:43 cbkidlll [ 3.558042] uhci_hcd 0000:00:1a.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
Dec 2 13:10:43 cbkidlll [ 3.561237] generic-usb 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1a.0-1/input0
Dec 2 13:10:43 cbkidlll [ 3.561600] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
Dec 2 13:10:43 cbkidlll [ 3.561627] usb 3-1:1.1: uevent
Dec 2 13:10:43 cbkidlll [ 3.561720] usbhid 3-1:1.1: usb_probe_interface
Dec 2 13:10:43 cbkidlll [ 3.561722] usbhid 3-1:1.1: usb_probe_interface - got id
Dec 2 13:10:43 cbkidlll [ 3.582492] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/input/input7
Dec 2 13:10:43 cbkidlll [ 3.586284] uhci_hcd 0000:00:1a.0: reserve dev 2 ep82-INT, period 8, phase 4, 87 us
Dec 2 13:10:43 cbkidlll [ 3.589446] generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1a.0-1/input1
Dec 2 13:10:43 cbkidlll [ 3.589780] drivers/usb/core/inode.c: creating file '002'
Dec 2 13:10:43 cbkidlll [ 3.589894] usb 3-1: New USB device found, idVendor=04f3, idProduct=0103
Dec 2 13:10:43 cbkidlll [ 3.590053] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Dec 2 13:10:43 cbkidlll [ 3.590197] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002
Dec 2 13:10:43 cbkidlll [ 3.590209] uhci_hcd 0000:00:1d.0: port 1 portsc 01a3,00
Dec 2 13:10:43 cbkidlll [ 3.590219] hub 5-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
Dec 2 13:10:43 cbkidlll [ 3.694041] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
Dec 2 13:10:43 cbkidlll [ 3.796044] usb 5-1: new low speed USB device using uhci_hcd and address 2
Dec 2 13:10:43 cbkidlll [ 3.903264] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input8
Dec 2 13:10:43 cbkidlll [ 3.937509] usb 5-1: skipped 1 descriptor after interface
Dec 2 13:10:43 cbkidlll [ 3.942505] usb 5-1: default language 0x0409
Dec 2 13:10:43 cbkidlll [ 3.949552] usb 5-1: uevent
Dec 2 13:10:43 cbkidlll [ 3.949624] usb 5-1: usb_probe_device
Dec 2 13:10:43 cbkidlll [ 3.949628] usb 5-1: configuration #1 chosen from 1 choice
Dec 2 13:10:43 cbkidlll [ 3.952506] usb 5-1: adding 5-1:1.0 (config #1, interface 0)
Dec 2 13:10:43 cbkidlll [ 3.952530] usb 5-1:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 3.952637] usbhid 5-1:1.0: usb_probe_interface
Dec 2 13:10:43 cbkidlll [ 3.952640] usbhid 5-1:1.0: usb_probe_interface - got id
Dec 2 13:10:43 cbkidlll [ 3.954288] usb usb4: suspend_rh (auto-stop)
Dec 2 13:10:43 cbkidlll [ 3.954317] usb usb6: suspend_rh (auto-stop)
Dec 2 13:10:43 cbkidlll [ 3.954345] usb usb7: suspend_rh (auto-stop)
Dec 2 13:10:43 cbkidlll [ 3.965855] input: USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input9
Dec 2 13:10:43 cbkidlll [ 3.973434] generic-usb 0003:15D9:0A37.0003: input,hidraw2: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-1/input0
Dec 2 13:10:43 cbkidlll [ 3.973771] drivers/usb/core/inode.c: creating file '002'
Dec 2 13:10:43 cbkidlll [ 3.973885] usb 5-1: New USB device found, idVendor=15d9, idProduct=0a37
Dec 2 13:10:43 cbkidlll [ 3.974042] usb 5-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Dec 2 13:10:43 cbkidlll [ 3.974184] usb 5-1: Product: USB Mouse
Dec 2 13:10:43 cbkidlll [ 3.974333] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
Dec 2 13:10:43 cbkidlll [ 4.008064] md: Waiting for all devices to be available before autodetect
Dec 2 13:10:43 cbkidlll [ 4.008206] md: If you don't use raid, use raid=noautodetect
Dec 2 13:10:43 cbkidlll [ 4.008608] md: Autodetecting RAID arrays.
Dec 2 13:10:43 cbkidlll [ 4.008747] md: Scanned 0 and added 0 devices.
Dec 2 13:10:43 cbkidlll [ 4.008883] md: autorun ...
Dec 2 13:10:43 cbkidlll [ 4.009022] md: ... autorun DONE.
Dec 2 13:10:43 cbkidlll [ 4.035818] kjournald starting. Commit interval 5 seconds
Dec 2 13:10:43 cbkidlll [ 4.035978] EXT3-fs: mounted filesystem with ordered data mode.
Dec 2 13:10:43 cbkidlll [ 4.036130] VFS: Mounted root (ext3 filesystem) readonly.
Dec 2 13:10:43 cbkidlll [ 4.036299] Freeing unused kernel memory: 532k freed
Dec 2 13:10:43 cbkidlll [ 4.036714] Write protecting the kernel read-only data: 7060k
Dec 2 13:10:43 cbkidlll [ 4.101621] khelper used greatest stack depth: 5504 bytes left
Dec 2 13:10:43 cbkidlll [ 4.931088] init-early.sh used greatest stack depth: 3912 bytes left
Dec 2 13:10:43 cbkidlll [ 5.036594] mount used greatest stack depth: 3720 bytes left
Dec 2 13:10:43 cbkidlll [ 5.701046] hub 4-0:1.0: hub_suspend
Dec 2 13:10:43 cbkidlll [ 5.701057] usb usb4: bus auto-suspend
Dec 2 13:10:43 cbkidlll [ 5.701060] usb usb4: suspend_rh
Dec 2 13:10:43 cbkidlll [ 5.701080] hub 6-0:1.0: hub_suspend
Dec 2 13:10:43 cbkidlll [ 5.701085] usb usb6: bus auto-suspend
Dec 2 13:10:43 cbkidlll [ 5.701087] usb usb6: suspend_rh
Dec 2 13:10:43 cbkidlll [ 5.701105] hub 7-0:1.0: hub_suspend
Dec 2 13:10:43 cbkidlll [ 5.701109] usb usb7: bus auto-suspend
Dec 2 13:10:43 cbkidlll [ 5.701111] usb usb7: suspend_rh
Dec 2 13:10:43 cbkidlll [ 5.701129] hub 1-0:1.0: hub_suspend
Dec 2 13:10:43 cbkidlll [ 5.701133] usb usb1: bus auto-suspend
Dec 2 13:10:43 cbkidlll [ 5.701136] ehci_hcd 0000:00:1a.7: suspend root hub
Dec 2 13:10:43 cbkidlll [ 5.977453] usb usb3: uevent
Dec 2 13:10:43 cbkidlll [ 5.977480] usb 3-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 5.977528] usb 3-1: uevent
Dec 2 13:10:43 cbkidlll [ 5.977552] usb 3-1:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 5.977691] usb 3-1:1.1: uevent
Dec 2 13:10:43 cbkidlll [ 5.977931] usb usb4: uevent
Dec 2 13:10:43 cbkidlll [ 5.977955] usb 4-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 5.978109] usb usb1: uevent
Dec 2 13:10:43 cbkidlll [ 5.978132] usb 1-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 5.978807] usb usb5: uevent
Dec 2 13:10:43 cbkidlll [ 5.978830] usb 5-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 5.978877] usb 5-1: uevent
Dec 2 13:10:43 cbkidlll [ 5.978900] usb 5-1:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 5.979165] usb usb6: uevent
Dec 2 13:10:43 cbkidlll [ 5.979187] usb 6-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 5.979313] usb usb7: uevent
Dec 2 13:10:43 cbkidlll [ 5.979336] usb 7-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 5.979459] usb usb2: uevent
Dec 2 13:10:43 cbkidlll [ 5.979485] usb 2-0:1.0: uevent
Dec 2 13:10:43 cbkidlll [ 6.701288] hub 2-0:1.0: hub_suspend
Dec 2 13:10:43 cbkidlll [ 6.701298] usb usb2: bus auto-suspend
Dec 2 13:10:43 cbkidlll [ 6.701301] ehci_hcd 0000:00:1d.7: suspend root hub
Dec 2 13:10:43 cbkidlll [ 71.439810] EXT3 FS on sda7, internal journal
Dec 2 13:10:43 cbkidlll [ 71.703618] kjournald starting. Commit interval 5 seconds
Dec 2 13:10:43 cbkidlll [ 71.714161] EXT3 FS on sda1, internal journal
Dec 2 13:10:43 cbkidlll [ 71.714168] EXT3-fs: mounted filesystem with ordered data mode.
Dec 2 13:10:43 cbkidlll [ 71.802609] kjournald starting. Commit interval 5 seconds
Dec 2 13:10:43 cbkidlll [ 71.802855] EXT3 FS on sda8, internal journal
Dec 2 13:10:43 cbkidlll [ 71.802860] EXT3-fs: mounted filesystem with ordered data mode.
Dec 2 13:10:43 cbkidlll [ 71.832332] kjournald starting. Commit interval 5 seconds
Dec 2 13:10:43 cbkidlll [ 71.832565] EXT3 FS on sda6, internal journal
Dec 2 13:10:43 cbkidlll [ 71.832569] EXT3-fs: mounted filesystem with ordered data mode.
Dec 2 13:10:43 cbkidlll [ 74.129070] r8169: eth0: link up
Dec 2 13:10:43 cbkidlll [ 74.129080] r8169: eth0: link up
Dec 2 13:10:43 cbkidlll [ 74.413491] Adding 2000052k swap on /dev/sda5. Priority:-1 extents:1 across:2000052k
Dec 2 13:10:44 cbkidlll [ 75.586993] usb usb3: uevent
Dec 2 13:10:44 cbkidlll [ 75.587076] usb 3-0:1.0: uevent
Dec 2 13:10:44 cbkidlll [ 75.587203] usb 3-1: uevent
Dec 2 13:10:44 cbkidlll [ 75.587617] usb 3-1:1.0: uevent
Dec 2 13:10:44 cbkidlll [ 75.588010] usb 3-1:1.1: uevent
Dec 2 13:10:44 cbkidlll [ 75.588900] usb usb4: uevent
Dec 2 13:10:44 cbkidlll [ 75.588976] usb 4-0:1.0: uevent
Dec 2 13:10:44 cbkidlll [ 75.589579] usb usb1: uevent
Dec 2 13:10:44 cbkidlll [ 75.589657] usb 1-0:1.0: uevent
Dec 2 13:10:44 cbkidlll [ 75.591678] usb usb5: uevent
Dec 2 13:10:44 cbkidlll [ 75.591756] usb 5-0:1.0: uevent
Dec 2 13:10:44 cbkidlll [ 75.591883] usb 5-1: uevent
Dec 2 13:10:44 cbkidlll [ 75.591959] usb 5-1:1.0: uevent
Dec 2 13:10:44 cbkidlll [ 75.593065] usb usb6: uevent
Dec 2 13:10:44 cbkidlll [ 75.593142] usb 6-0:1.0: uevent
Dec 2 13:10:44 cbkidlll [ 75.593698] usb usb7: uevent
Dec 2 13:10:44 cbkidlll [ 75.593774] usb 7-0:1.0: uevent
Dec 2 13:10:44 cbkidlll [ 75.594112] usb usb2: uevent
Dec 2 13:10:44 cbkidlll [ 75.594187] usb 2-0:1.0: uevent
Dec 2 13:10:44 cbkidlll acpid: client connected from 2264[102:443]
Dec 2 13:10:44 cbkidlll acpid: 1 client rule loaded
Dec 2 13:10:46 cbkidlll cron[2336]: (CRON) STARTUP (V5.0)
Dec 2 13:10:46 cbkidlll acpid: client connected from 2327[0:0]
Dec 2 13:10:46 cbkidlll acpid: 1 client rule loaded
Dec 2 13:10:50 cbkidlll [ 81.367312] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
Dec 2 13:10:50 cbkidlll [ 81.377520] uhci_hcd 0000:00:1d.0: release dev 2 ep81-INT, period 8, phase 4, 93 us
Dec 2 13:10:50 cbkidlll [ 81.447307] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 93 us
Dec 2 13:10:53 cbkidlll [ 84.447277] eth0: no IPv6 routers present
Dec 2 13:10:58 cbkidlll kdm: :0[2374]: pam_unix(kde:session): session opened for user cbkid by (uid=0)
Dec 2 13:11:23 cbkidlll sudo: cbkid : TTY=pts/1 ; PWD=/home/cbkid ; USER=root ; COMMAND=/bin/su
Dec 2 13:11:23 cbkidlll sudo: pam_unix(sudo:session): session opened for user root by cbkid(uid=0)
Dec 2 13:11:23 cbkidlll sudo: pam_unix(sudo:session): session closed for user root
Dec 2 13:11:23 cbkidlll su[2498]: Successful su for root by root
Dec 2 13:11:23 cbkidlll su[2498]: + pts/1 root:root
Dec 2 13:11:23 cbkidlll su[2498]: pam_unix(su:session): session opened for user root by cbkid(uid=0)

复制代码

cbkid · 发表于 2008-12-2 13:52:13

Xoorg.0.log 26内核

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.22-gentoo-r8 x86_64
Current Operating System: Linux cbkidlll 2.6.26-gentoo-r3 #3 SMP Sat Nov 29 16:40:54 CST 2008 x86_64
Build Date: 01 December 2008 11:12:11PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 2 13:13:33 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/OTF,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/.
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/corefonts/,
/usr/share/fonts/local/,
/usr/share/fonts/ttf-bitstream-vera/,
/usr/share/fonts/wqy-bitmapfont,
/usr/share/fonts/wqy-zenhei/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib64/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x7ad000
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xfc000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xfc100000/1048576
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "xtrap"
(II) Loading /usr/lib64/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib64/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "intel"
(II) Loading /usr/lib64/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.5.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "mouse"
(II) Loading /usr/lib64/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib64/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFC000000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "QDS", prod id 44
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "QDS", prod id 44
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib64/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000203 to 0x00000000
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status:
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x80000206
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000c0 to 0x000c00c0
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00404000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238592 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 954364 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: node name is /dev/dri/card0
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfc000000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0200000, handle = 0xd0200000
(II) intel(0): [drm] mapped back buffer at 0xd1b00000, handle = 0xd1b00000
(II) intel(0): [drm] mapped depth buffer at 0xd2140000, handle = 0xd2140000
(II) intel(0): [drm] mapped classic textures at 0xd2780000, handle = 0xd2780000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00840000 (pgoffset 2112)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01b00000 (pgoffset 6912)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02140000 (pgoffset 8512)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x02780000 (pgoffset 10112)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
(II) intel(0): 0x00032000-0x00131fff: fake bufmgr (1024 kB)
(II) intel(0): 0x00132000-0x00147fff: exa G965 state buffer (88 kB)
(II) intel(0): 0x00148000-0x00148fff: overlay registers (4 kB)
(II) intel(0): 0x00149000-0x00149fff: power context (4 kB)
(II) intel(0): 0x00200000-0x0083ffff: front buffer (6400 kB) X tiled
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x00840000-0x01afffff: exa offscreen (19200 kB)
(II) intel(0): 0x01b00000-0x0213ffff: back buffer (6400 kB) X tiled
(II) intel(0): 0x02140000-0x0277ffff: depth buffer (6400 kB) Y tiled
(II) intel(0): 0x02780000-0x0477ffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 304 x 190
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) config/hal: Adding input device USB Mouse
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device HID 04f3:0103
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device HID 04f3:0103
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device PS/2 Logitech Wheel Mouse
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Video Bus
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) intel(0): EDID vendor "QDS", prod id 44
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 804 808 816 -hsync -vsync (48.9 kHz)
(II) intel(0): EDID vendor "QDS", prod id 44
(EE) intel(0): underrun on pipe B!

复制代码

cbkid · 发表于 2008-12-2 13:52:58

Xorg.0.log 28内核

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.22-gentoo-r8 x86_64
Current Operating System: Linux cbkidlll 2.6.28-rc6 #1 SMP Mon Dec 1 09:32:18 CST 2008 x86_64
Build Date: 01 December 2008 11:12:11PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 2 13:10:46 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/OTF,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/.
(**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/corefonts/,
/usr/share/fonts/local/,
/usr/share/fonts/ttf-bitstream-vera/,
/usr/share/fonts/wqy-bitmapfont,
/usr/share/fonts/wqy-zenhei/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
(==) ModulePath set to "/usr/lib64/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x7ad000
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xfc000000/1048576, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0xfc100000/1048576
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib64/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib64/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "record"
(II) Loading /usr/lib64/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "xtrap"
(II) Loading /usr/lib64/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib64/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "intel"
(II) Loading /usr/lib64/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.5.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "mouse"
(II) Loading /usr/lib64/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib64/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib64/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
(--) intel(0): Chipset: "965GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFC000000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "QDS", prod id 44
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "QDS", prod id 44
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib64/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib64/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000203 to 0x00000000
(WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status:
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x80000206
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000c0 to 0x000c00c0
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00404000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238592 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 954364 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfc000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 19660800 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0cd40000 (pgoffset 52544)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0e000000 (pgoffset 57344)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0cd3ffff: DRI memory manager (202500 kB)
(II) intel(0): 0x0cd40000-0x0dffffff: exa offscreen (19200 kB)
(II) intel(0): 0x0e000000-0x0fffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x00ddefff: depth buffer (6400 kB) Y tiled
(II) intel(0): 0x00f9f000-0x015defff: back buffer (6400 kB) X tiled
(II) intel(0): 0x01800000-0x01e3ffff: front buffer (6400 kB) X tiled
(II) intel(0): 0x0179f000-0x0179ffff: overlay registers (4 kB)
(II) intel(0): 0x017a0000-0x017b5fff: exa G965 state buffer (88 kB)
(II) intel(0): 0x017c0000-0x017c7fff: logical 3D context (32 kB)
(II) intel(0): 0x017c8000-0x017d1fff: HW cursors (40 kB)
(II) intel(0): 0x0cd40000: end of memory manager
(WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] mapped front buffer at 0xd1800000, handle = 0xd1800000
(II) intel(0): [drm] mapped back buffer at 0xd0f9f000, handle = 0xd0f9f000
(II) intel(0): [drm] mapped depth buffer at 0xd079f000, handle = 0xd079f000
(II) intel(0): [drm] mapped classic textures at 0xde000000, handle = 0xde000000
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib64/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 304 x 190
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(EE) intel(0): underrun on pipe B!
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device PS/2 Logitech Wheel Mouse
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device USB Mouse
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device HID 04f3:0103
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed
(II) config/hal: Adding input device HID 04f3:0103
(II) LoadModule: "evdev"
(WW) Warning, couldn't open module evdev
(II) UnloadModule: "evdev"
(EE) Failed to load module "evdev" (module does not exist, 0)
(EE) No input driver matching `evdev'
(EE) config/hal: NewInputDeviceRequest failed

复制代码

cbkid · 发表于 2008-12-2 13:54:25

xorg.conf

Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/corefonts/"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/ttf-bitstream-vera/"
FontPath "/usr/share/fonts/wqy-bitmapfont"
FontPath "/usr/share/fonts/wqy-zenhei/
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "record"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile GM965/GL960 Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection

复制代码

已经贴了这么多了需要什么请说

軒轅.子 · 发表于 2008-12-2 14:08:43

我看到了大量的ACPI Error ......
能力有限...
你可以试试启动的时候加上 acpi=off 看看情况怎么样

yourfriend · 发表于 2008-12-2 14:17:06

要不要试试25-r7 ？

		自动登录	找回密码
密码			注册