ASUS acpi的问题

KenShinXF

升级2.6.23后
开机时出现
ACPI: EC: acpi_ec_wait timeout, status = 199, expect_event = 2
ACPI: EC: input buffer is not empty, aborting transaction
错误
不知道是什么原因
dmesg信息如下

1. 
   
2. KenShinXF linux # dmesg
   
3. Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node d7ea3914), AE_TIME
   
4. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node d7ea3ea0), AE_TIME
   
5. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.BAT0._STA] (Node d7ea3b80), AE_TIME
   
6. ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d7ea3b80), AE_TIME
   
7. ACPI: EC: acpi_ec_wait timeout, status = 199, expect_event = 2
   
8. ACPI: EC: input buffer is not empty, aborting transaction
   
9. ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126]
   
10. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node d7ea3914), AE_TIME
    
11. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node d7ea3ea0), AE_TIME
    
12. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.BAT0._STA] (Node d7ea3b80), AE_TIME
    
13. ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d7ea3b80), AE_TIME
    
14. ACPI: EC: acpi_ec_wait timeout, status = 199, expect_event = 2
    
15. ACPI: EC: input buffer is not empty, aborting transaction
    
16. ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126]
    
17. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node d7ea3914), AE_TIME
    
18. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node d7ea3ea0), AE_TIME
    
19. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.BAT0._STA] (Node d7ea3b80), AE_TIME
    
20. ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d7ea3b80), AE_TIME
    
21. ACPI: EC: acpi_ec_wait timeout, status = 199, expect_event = 2
    
22. ACPI: EC: input buffer is not empty, aborting transaction
    
23. ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126]
    
24. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node d7ea3914), AE_TIME
    
25. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node d7ea3ea0), AE_TIME
    
26. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.BAT0._STA] (Node d7ea3b80), AE_TIME
    
27. ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d7ea3b80), AE_TIME
    
28. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
    
29. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
    
30. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 10 11 12 14 15)
    
31. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
    
32. ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  2F, should be 29 [20070126]
    
33. Linux Plug and Play Support v0.97 (c) Adam Belay
    
34. pnp: PnP ACPI init
    
35. ACPI: bus type pnp registered
    
36. ACPI: EC: acpi_ec_wait timeout, status = 199, expect_event = 2
    
37. ACPI: EC: input buffer is not empty, aborting transaction
    
38. ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126]
    
39. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node d7ea3914), AE_TIME
    
40. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node d7ea3ea0), AE_TIME
    
41. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.BAT0._STA] (Node d7ea3b80), AE_TIME
    
42. ACPI Error (uteval-0233): Method execution failed [\_SB_.PCI0.BAT0._STA] (Node d7ea3b80), AE_TIME
    
43. pnp: PnP ACPI: found 13 devices
    
44. ACPI: ACPI bus type pnp unregistered
    
45. SCSI subsystem initialized
    
46. usbcore: registered new interface driver usbfs
    
47. usbcore: registered new interface driver hub
    
48. usbcore: registered new device driver usb
    
49. PCI: Using ACPI for IRQ routing
    
50. PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    
51. NET: Registered protocol family 23
    
52. Time: tsc clocksource has been installed.
    
53. pnp: 00:08: ioport range 0x228-0x22f has been reserved
    
54. pnp: 00:09: iomem range 0xffb00000-0xffffffff could not be reserved
    
55. pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
    
56. pnp: 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
    
57. pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
    
58. pnp: 00:0c: iomem range 0xc0000-0xdffff could not be reserved
    
59. pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
    
60. pnp: 00:0c: iomem range 0x100000-0x17ffffff could not be reserved
    
61. PCI: Bridge: 0000:00:01.0
    
62.   IO window: e000-efff
    
63.   MEM window: fd900000-fdcfffff
    
64.   PREFETCH window: cfe00000-efdfffff
    
65. PCI: Bus 3, cardbus bridge: 0000:02:05.0
    
66.   IO window: 00001000-000010ff
    
67.   IO window: 00001400-000014ff
    
68.   PREFETCH window: 20000000-23ffffff
    
69.   MEM window: 28000000-2bffffff
    
70. PCI: Bridge: 0000:00:14.4
    
71.   IO window: 1000-1fff
    
72.   MEM window: fdd00000-fe0fffff
    
73.   PREFETCH window: 20000000-23ffffff
    
74. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    
75. PCI: setting IRQ 5 as level-triggered
    
76. ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    
77. NET: Registered protocol family 2
    
78. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    
79. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    
80. TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
    
81. TCP: Hash tables configured (established 16384 bind 16384)
    
82. TCP reno registered
    
83. checking if image is initramfs... it is
    
84. Freeing initrd memory: 481k freed
    
85. Machine check exception polling timer started.
    
86. NTFS driver 2.1.28 [Flags: R/W].
    
87. io scheduler noop registered
    
88. io scheduler deadline registered (default)
    
89. Boot video device is 0000:01:05.0
    
90. Real Time Clock Driver v1.12ac
    
91. Linux agpgart interface v0.102
    
92. agpgart: Detected Ati IGP9100/M chipset
    
93. agpgart: AGP aperture is 128M @ 0xf0000000
    
94. [drm] Initialized drm 1.1.0 20060810
    
95. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    
96. PCI: setting IRQ 11 as level-triggered
    
97. ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    
98. [drm] Initialized radeon 1.28.0 20060524 on minor 0
    
99. uvesafb: ATI Technologies Inc., BS3 , 01.00, OEM: ATI MOBILITY RADEON 9100 IGP, VBE v2.0
    
100. uvesafb: protected mode interface info at c000:520f
     
101. uvesafb: pmi: set display start = c00c527d, set palette = c00c52b7
     
102. uvesafb: pmi: ports = e010 e016 e054 e038 e03c e05c e000 e004 e0b0 e0b2 e0b4
     
103. uvesafb: no monitor limits have been set, default refresh rate will be used
     
104. uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=3072
     
105. uvesafb: framebuffer at 0xd0000000, mapped to 0xd8880000, using 6144k, total 131072k
     
106. fb0: VESA VGA frame buffer device
     
107. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
     
108. serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
     
109. ACPI: PCI Interrupt 0000:00:14.6[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
     
110. ACPI: PCI interrupt for device 0000:00:14.6 disabled
     
111. floppy0: no floppy controllers found
     
112. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
     
113. loop: module loaded
     
114. b44.c:v1.01 (Jun 16, 2006)
     
115. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
     
116. PCI: setting IRQ 4 as level-triggered
     
117. ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4
     
118. eth0: Broadcom 4400 10/100BaseT Ethernet 00:0e:a6:b4:6e:2b
     
119. Linux video capture interface: v2.00
     
120. zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
     
121. usbcore: registered new interface driver zc0301
     
122. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
     
123. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
     
124. ATIIXP: IDE controller at PCI slot 0000:00:14.1
     
125. ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
     
126. ATIIXP: chipset revision 0
     
127. ATIIXP: not 100% native mode: will probe irqs later
     
128.     ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
     
129.     ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
     
130. Probing IDE interface ide0...
     
131. hda: IC25N040ATMR04-0, ATA DISK drive
     
132. hda: selected mode 0x45
     
133. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
     
134. Probing IDE interface ide1...
     
135. hdc: TOSHIBA DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive
     
136. hdc: selected mode 0x42
     
137. ide1 at 0x170-0x177,0x376 on irq 15
     
138. hda: max request size: 512KiB
     
139. hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
     
140. hda: cache flushes supported
     
141. hda: hda1 hda2 < hda5 hda6 > hda3
     
142. hdc: ATAPI 24X DVD-ROM drive, 192kB Cache, UDMA(33)
     
143. Uniform CD-ROM driver Revision: 3.20
     
144. ACPI: PCI Interrupt 0000:02:05.1[b] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4
     
145. ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[4]  MMIO=[fe000000-fe0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
     
146. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
     
147. PCI: setting IRQ 10 as level-triggered
     
148. ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
     
149. ehci_hcd 0000:00:13.2: EHCI Host Controller
     
150. ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
     
151. ehci_hcd 0000:00:13.2: irq 10, io mem 0xfeb00000
     
152. ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
     
153. usb usb1: configuration #1 chosen from 1 choice
     
154. hub 1-0:1.0: USB hub found
     
155. hub 1-0:1.0: 6 ports detected
     
156. hub 1-0:1.0: over-current change on port 1
     
157. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
     
158. ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
     
159. ohci_hcd 0000:00:13.0: OHCI Host Controller
     
160. ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
     
161. ohci_hcd 0000:00:13.0: irq 10, io mem 0xfe900000
     
162. usb usb2: configuration #1 chosen from 1 choice
     
163. hub 2-0:1.0: USB hub found
     
164. hub 2-0:1.0: 3 ports detected
     
165. ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
     
166. ohci_hcd 0000:00:13.1: OHCI Host Controller
     
167. ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
     
168. ohci_hcd 0000:00:13.1: irq 10, io mem 0xfea00000
     
169. usb usb3: configuration #1 chosen from 1 choice
     
170. hub 3-0:1.0: USB hub found
     
171. hub 3-0:1.0: 3 ports detected
     
172. hub 1-0:1.0: over-current change on port 6
     
173. USB Universal Host Controller Interface driver v3.0
     
174. Initializing USB Mass Storage driver...
     
175. usb 3-1: new low speed USB device using ohci_hcd and address 2
     
176. usb 3-1: configuration #1 chosen from 1 choice
     
177. usbcore: registered new interface driver usb-storage
     
178. USB Mass Storage support registered.
     
179. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
     
180. i8042.c: Detected active multiplexing controller, rev 1.1.
     
181. serio: i8042 KBD port at 0x60,0x64 irq 1
     
182. serio: i8042 AUX0 port at 0x60,0x64 irq 12
     
183. serio: i8042 AUX1 port at 0x60,0x64 irq 12
     
184. serio: i8042 AUX2 port at 0x60,0x64 irq 12
     
185. serio: i8042 AUX3 port at 0x60,0x64 irq 12
     
186. mice: PS/2 mouse device common for all mice
     
187. input: AT Translated Set 2 keyboard as /class/input/input0
     
188. ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000319073e]
     
189. input: PS/2 Mouse as /class/input/input1
     
190. input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
     
191. i2c /dev entries driver
     
192. input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
     
193. input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-1
     
194. usbcore: registered new interface driver usbhid
     
195. drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
     
196. IPv4 over IPv4 tunneling driver
     
197. ip_tables: (C) 2000-2006 Netfilter Core Team
     
198. TCP cubic registered
     
199. NET: Registered protocol family 1
     
200. NET: Registered protocol family 17
     
201. NET: Registered protocol family 15
     
202. ieee80211: 802.11 data/management/control stack, git-1.1.13
     
203. ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
     
204. ieee80211_crypt: registered algorithm 'NULL'
     
205. ieee80211_crypt: registered algorithm 'WEP'
     
206. Using IPI Shortcut mode
     
207. drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
     
208. ReiserFS: hda3: found reiserfs format "3.6" with standard journal
     
209. ReiserFS: hda3: using ordered data mode
     
210. ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
     
211. ReiserFS: hda3: checking transaction log (hda3)
     
212. ReiserFS: hda3: Using r5 hash to sort names
     
213. VFS: Mounted root (reiserfs filesystem) readonly.
     
214. Freeing unused kernel memory: 188k freed
     
215. input: Power Button (FF) as /class/input/input4
     
216. ACPI: Power Button (FF) [PWRF]
     
217. thermal: Unknown symbol acpi_processor_set_thermal_limit
     
218. ACPI: PCI Interrupt 0000:00:14.5[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
     
219. ACPI: EC: acpi_ec_wait timeout, status = 199, expect_event = 2
     
220. ACPI: EC: input buffer is not empty, aborting transaction
     
221. ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126]
     
222. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node d7ea3914), AE_TIME
     
223. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node d7ea3ea0), AE_TIME
     
224. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.ACPS] (Node d7ea3964), AE_TIME
     
225. ACPI Error (psparse-0537): Method parse/execution failed [\ACPS] (Node d7ea54f0), AE_TIME
     
226. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.AC0_._PSR] (Node d7ea3338), AE_TIME
     
227. ACPI Exception (ac-0100): AE_TIME, Error reading AC Adapter state [20070126]
     
228. Asus Laptop ACPI Extras version 0.30
     
229.   L4R model detected, supported
     
230. input: Lid Switch as /class/input/input5
     
231. ACPI: Lid Switch [LID]
     
232. input: Sleep Button (CM) as /class/input/input6
     
233. ACPI: Sleep Button (CM) [SLPB]
     
234. input: Power Button (CM) as /class/input/input7
     
235. ACPI: Power Button (CM) [PWRB]
     
236. ACPI: EC: acpi_ec_wait timeout, status = 199, expect_event = 2
     
237. ACPI: EC: input buffer is not empty, aborting transaction
     
238. ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126]
     
239. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node d7ea3914), AE_TIME
     
240. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node d7ea3ea0), AE_TIME
     
241. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.ACPS] (Node d7ea3964), AE_TIME
     
242. ACPI Error (psparse-0537): Method parse/execution failed [\ACPS] (Node d7ea54f0), AE_TIME
     
243. ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PPC] (Node d7ea1ea0), AE_TIME
     
244. ACPI Exception (processor_perflib-0122): AE_TIME, Evaluating _PPC [20070126]
     
245. ACPI: duty_cycle spans bit 4
     
246. input: Video Bus as /class/input/input8
     
247. ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
     
248. ACPI: Thermal Zone [THRM] (54 C)
     
249. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
     
250. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
     
251. Adding 586332k swap on /dev/hda6.  Priority:-1 extents:1 across:586332k
     
252. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
     
253. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
     
254. agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
     
255. [drm] Setting GART location based on old memory map
     
256. [drm] Loading R200 Microcode
     
257. [drm] writeback test succeeded in 1 usecs
     
258. spurious 8259A interrupt: IRQ7.
     
259. PPP generic driver version 2.4.2
     
260. NET: Registered protocol family 24
     
261. b44: eth0: Link is up at 100 Mbps, full duplex.
     
262. b44: eth0: Flow control is off for TX and off for RX.
     
263. ACPI: EC: acpi_ec_wait timeout, status = 199, expect_event = 2
     
264. ACPI: EC: input buffer is not empty, aborting transaction
     
265. ACPI Exception (evregion-0420): AE_TIME, Returned by Handler for [EmbeddedControl] [20070126]
     
266. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node d7ea3914), AE_TIME
     
267. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node d7ea3ea0), AE_TIME
     
268. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.LID_._LID] (Node d7ea53ec), AE_TIME
     
269. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
     
270. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
     
271. agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
     
272. [drm] Loading R200 Microcode
     
273. KenShinXF linux #
     

复制代码