［求助］SuSE 10.1 GNOME 下的笔记本17寸显示器频率设置的问题

sharkliang

我现在用的是笔记本，ATI的显卡，17寸的显示器（笔记本上贴的标签是“17.1'' WSXGA”）。想在yast2设置一下显示器的同步频率。实在是不知道怎么弄，在网上查了半天才知道一般是不用更改的，可是我“手欠”，在知道这个之前就已经改得乱七八糟了。现在想改回来，遗憾的是，我不知道到底怎么改才算是正确设置了。请各位帮帮忙，帮我正确设置一下，先谢谢了，谢谢！


ps：附件图片就是我想更改的地方，谢谢各位了，谢谢！

Thruth

60是正确的啊
或者你sax2 -r -m 0=fglrx 重新写默认设置，前提是你装了 ati 显卡驱动如果没装fglrx变radeon

sharkliang

版主，真是奇怪了，您一定得帮帮忙。我之所以更改显示器频率，是因为有一个问题一直无法解决，就是在GNOME下按“Ctrl + Alt + F1”后会花屏。这个问题我在您的精华贴里面提过问了（一直凑活到了今天，实在时无法忍耐了，这次一定要解决），您的解答是“一是关闭XGL；二是确定安装了正确的驱动程序”。

我没有装XGL；ATI的驱动是这两天刚刚下载的，专门给笔记本的，支持显卡列表里面有ATI Mobility Radeon X700，按照您精华贴里的方法进行了安装，发现在/usr/share/里没有fglrx文件夹，所以将“sax2 -r -m 0=fglrx”改为“sax2 -r -m 0=radeon”。

不知道是不是我的显卡驱动没有选择正确，因为我是个新手，我的显卡跟Thruth版主笔记本的显卡一样，可是我用的驱动却跟版主用得不一样，难道我选择的不对吗（Linux Display Drivers and Software -> Linux x86 -> Notebooks with ATI Graphics  -> ATI Proprietary Linux x86 Display Drivers for XFREE86 / X. Org Version 8.28.8）？

我在终端下用“＃lspci -v”查看到如下信息：
01:00.0 VGA compatible controller: ATI Technologies Inc M26 [Radeon Mobility X700] (prog-if 00 [VGA])
        Subsystem: ASUSTeK Computer Inc. Unknown device 1962
        Flags: bus master, fast devsel, latency 0, IRQ 169
        Memory at d0000000 (32-bit, prefetchable) [size=128M]
        I/O ports at c000 [size=256]
        Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at fe9c0000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Express Endpoint IRQ 0
        Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable

我弄错显卡驱动了吗，我的SuSE是x86那个版本的，问题到底出在哪里呢？版主，大家，帮帮忙，为什么在GNOME下“Ctrl + Alt + F1”会花屏，怎么解决呢？


先谢谢大家了，谢谢了！

Thruth

Ctrl + Alt + F1”后会花屏是驱动问题，有的版本ATI驱动装上就是花瓶，我也曾经一直花屏，直到最近两个版本的驱动

/usr/share/里没有fglrx文件夹,是正常的,为什么改 0=radeon ? 那0=radeon以后还有花屏么?

X700 Mobility硬件也是分几个版本，并不一定是硬件上完全相同一张卡

我用的是 64 位系统64位驱动，你的32位系统选32位驱动也是对的。

输出 lspci看看

sharkliang

首先先谢谢版主，然后在讨论问题。

我昨天已经改为“0=radeon”了，还是会花屏。按照版主所说的，看来肯定是驱动版本选则有问题，下面是lspci，看看能不能找到问题所在：

sharkLinux:/home/shark # lspci

00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)

00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)

00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)

00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)

00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)

00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)

00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)

00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)

00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)

00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)

01:00.0 VGA compatible controller: ATI Technologies Inc M26 [Radeon Mobility X700]

03:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)

03:01.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)

03:02.0 Multimedia controller: Philips Semiconductors SAA7133/SAA7135 Video Broadcast Decoder (rev f0)

03:03.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)

03:03.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)

03:03.2 Class 0805: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)

03:03.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 08)

03:03.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 03)

sharkLinux:/home/shark #


方便起见，更改了行距。先谢谢了！

Thruth

lspci -n|grep 01:00.0
是什么

zengjingpku

# /.../
# SaX generated X11 config file
# Created on: 2006-09-08T17:36:27+0800.
#
# Version: 7.1
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/local"
  FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/URW"
  FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
  FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
  FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/kwintv"
  FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
  FontPath     "/usr/X11R6/lib/X11/fonts/uni:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/CID"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  InputDevices "/dev/ttyS0"
  InputDevices "/dev/ttyS1"
  InputDevices "/dev/ttyS2"
  InputDevices "/dev/ttyS3"
  InputDevices "/dev/ttyS4"
  InputDevices "/dev/ttyS5"
  InputDevices "/dev/ttyS6"
  InputDevices "/dev/ttyS7"
  InputDevices "/dev/ttyS8"
  InputDevices "/dev/psaux"
  InputDevices "/dev/logibm"
  InputDevices "/dev/sunmouse"
  InputDevices "/dev/atibm"
  InputDevices "/dev/amigamouse"
  InputDevices "/dev/atarimouse"
  InputDevices "/dev/inportbm"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/mouse"
  InputDevices "/dev/usbmouse"
  InputDevices "/dev/adbmouse"
  InputDevices "/dev/input/mice"
  InputDevices "/dev/input/event0"
  InputDevices "/dev/pointer0"
  InputDevices "/dev/pointer1"
  InputDevices "/dev/pointer2"
  InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail"
EndSection

Section "Module"
  Load         "dbe"
  Load         "type1"
  Load         "freetype"
  Load         "extmod"
  Load         "glx"
  Load         "v4l"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "rotocol" "Standard"
  Option       "XkbLayout" "us"
  Option       "XkbModel" "pc104"
  Option       "XkbRules" "xfree86"
EndSection

Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[1]"
  Option       "Buttons" "7"
  Option       "Device" "/dev/input/mice"
  Option       "Name" "ImExPS/2 Logitech Explorer Mouse"
  Option       "rotocol" "explorerps/2"
  Option       "Vendor" "Sysp"
  Option       "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
  DisplaySize  431 269
  HorizSync    28-64
  Identifier   "Monitor[0]"
  ModelName    "1280X1024@60HZ"
  VendorName   "--> VESA"
  VertRefresh  50-60
  UseModes     "Modes[0]"
EndSection

Section "Modes"
  Identifier   "Modes[0]"
  Modeline         "1280x1024" 105.15 1280 1360 1496 1712 1024 1025 1028 1059
  Modeline         "1280x960" 97.68 1280 1352 1488 1696 960 961 964 993
  Modeline         "1280x800" 80.58 1280 1344 1480 1680 800 801 804 827
  Modeline         "1152x864" 78.82 1152 1216 1336 1520 864 865 868 894
  Modeline         "1280x768" 77.37 1280 1344 1480 1680 768 769 772 794
  Modeline         "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
  Modeline         "800x600" 36.88 800 832 912 1024 600 601 604 621
  Modeline         "768x576" 33.74 768 792 872 976 576 577 580 596
  Modeline         "640x480" 23.06 640 656 720 800 480 481 484 497
  Modeline         "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -HSync -VSync
EndSection

Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      32
    Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768" "800x600" "768x576" "640x480"
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection

Section "Device"
  BoardName    "Framebuffer Graphics"
  BusID        "1:0:0"
  Driver       "nvidia"
  Identifier   "Device[0]"
  VendorName   "VESA"
EndSection

Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  Option       "Clone" "off"
  Option       "Xinerama" "off"
  Screen       "Screen[0]"
EndSection

Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
EndSection

怎么修改呢?

zengjingpku

小弟的显示器型号是优派的vx2025
显卡7900GT
大家帮忙看看我的配置文件怎么修改呢？谢谢哦

sharkliang

按照版主的指示：

sharkLinux:~ # lspci -n|grep 01:00.0
01:00.0 Class 0300: 1002:5652
sharkLinux:~ #

不知道我做得对不对，请版主继续指示，谢谢，谢谢了！

sailon

奇怪了，明明楼主的显卡是X700，可配置文件里却是显示是nvidia的驱动