LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 1008|回复: 3

不能加载移动硬盘,messages如下(在硬件版已发帖,因为问题只在suse10.0中出现,所以本版

[复制链接]
发表于 2005-11-8 08:43:34 | 显示全部楼层 |阅读模式
Nov 7 22:11:07 linux kernel: Vendor: HTS42404 Model: 0M9AT00 Rev: MA2O
Nov 7 22:11:07 linux kernel: Type: Direct-Access ANSI SCSI revision: 00
Nov 7 22:11:07 linux kernel: SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
Nov 7 22:11:07 linux kernel: sda: assuming drive cache: write through
Nov 7 22:11:07 linux kernel: SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
Nov 7 22:11:07 linux kernel: sda: assuming drive cache: write through
Nov 7 22:11:07 linux kernel: sda: sda1
Nov 7 22:11:07 linux kernel: Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Nov 7 22:11:07 linux kernel: Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
Nov 7 22:11:07 linux kernel: usb-storage: device scan complete
Nov 7 22:11:37 linux kernel: usb 4-1: reset high speed USB device using ehci_hcd and address 5
Nov 7 22:12:08 linux kernel: usb 4-1: reset high speed USB device using ehci_hcd and address 5
Nov 7 22:12:38 linux kernel: usb 4-1: reset high speed USB device using ehci_hcd and address 5
Nov 7 22:13:08 linux kernel: usb 4-1: reset high speed USB device using ehci_hcd and address 5
Nov 7 22:13:38 linux kernel: usb 4-1: reset high speed USB device using ehci_hcd and address 5
Nov 7 22:13:38 linux kernel: SCSI error : <2 0 0 0> return code = 0x50000
Nov 7 22:13:38 linux kernel: end_request: I/O error, dev sda, sector 8
Nov 7 22:13:38 linux kernel: printk: 74 messages suppressed.
Nov 7 22:13:38 linux kernel: Buffer I/O error on device sda, logical block 1
Nov 7 22:14:08 linux kernel: usb 4-1: reset high speed USB device using ehci_hcd and address 5
Nov 7 22:14:08 linux kernel: SCSI error : <2 0 0 0> return code = 0x50000
Nov 7 22:14:08 linux kernel: end_request: I/O error, dev sda, sector 16
Nov 7 22:14:08 linux kernel: Buffer I/O error on device sda, logical block 2
Nov 7 22:14:38 linux kernel: usb 4-1: reset high speed USB device using ehci_hcd and address 5
Nov 7 22:14:39 linux kernel: SCSI error : <2 0 0 0> return code = 0x50000
Nov 7 22:14:39 linux kernel: end_request: I/O error, dev sda, sector 24
Nov 7 22:14:39 linux kernel: Buffer I/O error on device sda, logical block 3
Nov 7 22:15:09 linux kernel: usb 4-1: reset high speed USB device using ehci_hcd and address 5

-------------

linux:/home/zjtest # fdisk -l /dev/sda*
linux:/home/zjtest # fdisk -l /dev/sd*
linux:/home/zjtest # fdisk -l /dev/scr*
linux:/home/zjtest # fdisk -l /dev/sg*
[3]+ Stopped fdisk -l /dev/sg*
linux:/home/zjtest #ls /media/*
/media/cdrom:
. ..

/media/cdrom2:
. ..
/bin/ls: /media/floppy: 找不到介质
----------------------------
现在的系统是suse10.0。在RH8.0下可以识别,#mount /dev/sda1 /mnt/usb可以加载。在win2000下,可以识别,进入目录偶尔有”I/O错误“提示,再试可以进入。移动硬盘为日立4200转的笔记本硬盘,外面是IBM的硬盘盒。
--------------

怎么解决呢?
发表于 2005-11-8 10:34:24 | 显示全部楼层
修改BIOS中的IRQ,给USB2.0分配专用IRQ
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-11-14 22:17:41 | 显示全部楼层
我进入cmos后,IRQ全是自动分配给pci的,没法改成usb。

主班是845gl,bios没刷过。
回复 支持 反对

使用道具 举报

发表于 2005-11-15 10:16:37 | 显示全部楼层
估计你的移动硬盘有可能有问题,为什么在2000下会出现IO错误呢?
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表