thruth，你的无线网卡firmware是哪里下的啊？

天蝎网子

Post by Thruth
驱动起来了
找不到那个AP。。。。。。。。。。。
是不是因为提示里面：
Warning: Driver for device eth1 has been compiled with version 20
of Wireless Extension, while this program supports up to version 19.
Some things may be broken...
的问题。。。。。。

google了一下，貌似那个警告和连不上AP没有关系

the error message(version 19 vs 20) just means that the developers haven't tested the newer version. For most cards there's no problem, and nothing is broken....Fix this by updating the wireless tools

我去升级一下wireless tools看看

天蝎网子

现在已经没有那个warning了。。。但是仍然找不到AP。。。

另外，我之前在释放*.fw的时候，有出现一段提示，不知道和这个有没有关系

1. # bcm43xx-fwcutter -w /lib/firmware/ ./bcmwl5.sysbcm43xx-fwcutter can cut the firmware out of ./bcmwl5.sys
   
2. 
   
3.   filename :  bcmwl5.sys
   
4.   version  :  3.100.46.0
   
5.   MD5      :  38ca1443660d0f5f06887c6a2e692aeb
   
6. 
   
7. extracting bcm43xx_microcode2.fw ...
   
8. extracting bcm43xx_microcode4.fw ...
   
9. extracting bcm43xx_microcode5.fw ...
   
10. [color=red]*****: Sorry, it's not posible to extract "bcm43xx_microcode11.fw".
    
11. *****: Extracting firmware from an old driver is bad. Choose a more recent one.
    
12. *****: Luckily bcm43xx driver doesn't include microcode11 uploads at the moment.*****: But this can be added in the future...[/color]
    
13. extracting bcm43xx_pcm4.fw ...
    
14. extracting bcm43xx_pcm5.fw ...
    
15. extracting bcm43xx_initval01.fw ...
    
16. extracting bcm43xx_initval02.fw ...
    
17. extracting bcm43xx_initval03.fw ...
    
18. extracting bcm43xx_initval04.fw ...
    
19. extracting bcm43xx_initval05.fw ...
    
20. extracting bcm43xx_initval06.fw ...
    
21. extracting bcm43xx_initval07.fw ...
    
22. extracting bcm43xx_initval08.fw ...
    
23. extracting bcm43xx_initval09.fw ...
    
24. extracting bcm43xx_initval10.fw ...
    

复制代码

Thruth

应该和它没有关系，换个AP看看

天蝎网子

Post by Thruth
应该和它没有关系，换个AP看看

终于搞定啦～～用了一个叫AcerHK的东西。。。

有空帖个心得上来～真是几经周折啊。。。总算被我搞定了…………

Thruth

贴啊加油加油