LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
楼主: Thruth

Xgl集中问答贴

[复制链接]
 楼主| 发表于 2006-5-14 01:33:53 | 显示全部楼层
Post by monte
同问。
查了一下目前资料很少 都是关于i915的

gentoo hardware list里面说865G能xgl; 但compiz不work...

另外我的SuSE有50%概率启动加载到x以后偶的LCD黑屏会显示:can not display this video mode. 没有用xgl. 不知道是偶的LCD不行呢 还是 xorg 不行呢 还是显卡不行。安装的时候我把16bit color改成了 24bit ...

显卡驱动装的哪个?
回复 支持 反对

使用道具 举报

发表于 2006-5-14 02:50:09 | 显示全部楼层
Post by Thruth
显卡驱动装的哪个?

不知道 默认的 应该是i810吧
恩 是不是要手动改成i910.mo啊 有空研究研究
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-5-14 04:17:28 | 显示全部楼层
i810....................sorry.
Intel / open source driver "i810"
Driver does not accelerate blits from back buffer to front buffer which makes it very slow, and screen updates may flicker. The driver will soon be updated and should then work OK.
Driver has neither pBuffer nor FBO support. When using a composite manager all windows are rendered in software and only compositing is hardware accelerated. Astonishingly, this works well enough for most use cases. FBO support is supposed to be added to the driver in the near future.
XVideo YV12 surfaces are hardware accelerated (when no composite manager is used), but due to a bug in the driver the video will miss one of the color channels, leading to false greenish/purple colors. This has to be investigated.
回复 支持 反对

使用道具 举报

发表于 2006-5-14 12:06:47 | 显示全部楼层
楼主能不能分享一下ati卡的经验。

我的台式机上是nvidia,按照那个英文的安装步骤说明,xgl很顺利就装好了。

但是笔记本是t43,x300的卡,所以怎么都搞不定。

谢谢
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-5-14 14:11:54 | 显示全部楼层
Post by heavenstar_x
楼主能不能分享一下ati卡的经验。

我的台式机上是nvidia,按照那个英文的安装步骤说明,xgl很顺利就装好了。

但是笔记本是t43,x300的卡,所以怎么都搞不定。

谢谢

我5分钟就搞定了
在Gnome

呵呵

按照置顶装最新的ATI专有驱动fglrx 8.24.8
记着一定先装kernel-source和gcc
然后X300的话确保xorg.comf里面有
"KernelModuleParm" "agplock=0"
一行
一般是本来就有的
然后在重启以后就开Gnome里面控制中心,Desktop Effects 直接Enable,这时候不要退出,编辑/etc/opt/gnome/gdm/gdm.conf
把0=standard那行前面加#
下面1=standard前面去掉#
保存关闭
然后就按照英语那个页面的Configuring Gnome to Run Xgl往后就行
回复 支持 反对

使用道具 举报

发表于 2006-5-14 14:16:50 | 显示全部楼层
想要看看效果的建议下载一个kororaa的livecd爽一下。。。。
在我的台式机的mx440上,除了分辨率有点问题外,其他一切正常。
而在我的x700的本上,会死机,x300也会死。
http://kororaa.org/
看来想在我的本上看到suse的xgl效果的话不太容易了
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-5-14 14:20:18 | 显示全部楼层
笔记本X700我正在用XGL有什么问题么?
回复 支持 反对

使用道具 举报

发表于 2006-5-14 14:27:43 | 显示全部楼层
之前在用kororaa的livecd时,在给同学炫耀效果的时候死机了,机器整个没有了反映,用别人的x300的r52试了一下,也是过了一阵就死了。
现在正在下10.1的cd,看看装好了之后什么样子了
回复 支持 反对

使用道具 举报

 楼主| 发表于 2006-5-14 15:23:36 | 显示全部楼层
按我上面说的步骤来不会有问题
回复 支持 反对

使用道具 举报

发表于 2006-5-14 15:44:06 | 显示全部楼层
http://gentoo-wiki.com/HARDWARE_Video_Card_Support_Under_XGL


Cards found to be supported
....................
Intel Cards
Intel 855GM
Chipset: Intel Corporation 82852/855GM Integrated Grapics Device
Driver: x11-drivers/xf86-video-i810-1.5.1.0
Notes: Needs >=sys-kernel/*-sources-2.6.16 for DRI and crashes with mplayer -vo xv.
Intel 915GM
Chipset: Intel Corporation 82852/915GM Integrated Grapics Device
Driver: with latest drivers
Notes: drivers copied from mesa-6.4.2-r1 into the cvs-head mesa
Intel 945GM
Chipset: Intel Corporation Mobile 945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
Driver:
Notes: No DRI yet
Intel 965GM
Chipset: Intel Corporation 82865G Integrated Graphics Device
Driver: with latest drivers and CVS xorg-server
Notes: compiz does not yet work, error: "GLXUnsupportedPrivateRequest"

看来我的显卡玩不了xgl.
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表