配置mrtg遇到问题..哪位兄弟发个snmp.conf来看看!!!

hgkrt

我感觉自己的snmp.conf配置的不太好!!

哪位配置好的给我看看...

我是RH8.0,net-snmp-5.0.1的好像...

hgkrt

这是我用cfgmaker得到的mrtg.cfg...

里面所有的东东都是#的...

[quoto]# Created by
# ./cfgmaker --global WorkDir:/web/www/html/mrtg --output /etc/mrtg/mrtg.cfg public@localhost


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits

EnableIPv6: no
WorkDir:/web/www/html/mrtg

######################################################################
# System: linuxserver
# Description: Linux linuxserver 2.4.18-14 #1 Wed Sep 4 12:13:11 EDT 2002 i686
# Contact: Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
# Location: Unknown (edit /etc/snmp/snmpd.conf)
######################################################################


### Interface 1 >> Descr: 'lo' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of  which makes no sense
### * got 'no response received
###     SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
###                       community: "public"
###                      request ID: -113874710
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
#
# Target[localhost_1]: 1:public@localhost:
# SetEnv[localhost_1]: MRTG_INT_IP="" MRTG_INT_DESCR="lo"
# MaxBytes[localhost_1]: 0
# Title[localhost_1]: Traffic Analysis for 1 -- linuxserver
# PageTop[localhost_1]: <H1>Traffic Analysis for 1 -- linuxserver</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>linuxserver in Unknown (edit /etc/snmp/snmpd.conf)</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD>Root &lt;root@localhost&gt; (configure /etc/snmp/snmp.local.conf)</TD></TR>
#    <TR><TD>Description:</TD><TD>lo  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD> ()</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#  </TABLE>


### Interface 2 >> Descr: 'eth0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of  which makes no sense
### * got 'no response received
###     SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
###                       community: "public"
###                      request ID: -113874709
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
#
# Target[localhost_2]: 2:public@localhost:
# SetEnv[localhost_2]: MRTG_INT_IP="" MRTG_INT_DESCR="eth0"
# MaxBytes[localhost_2]: 0
# Title[localhost_2]: Traffic Analysis for 2 -- linuxserver
# PageTop[localhost_2]: <H1>Traffic Analysis for 2 -- linuxserver</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>linuxserver in Unknown (edit /etc/snmp/snmpd.conf)</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD>Root &lt;root@localhost&gt; (configure /etc/snmp/snmp.local.conf)</TD></TR>
#    <TR><TD>Description:</TD><TD>eth0  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD> ()</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#  </TABLE>


### Interface 3 >> Descr: 'eth1' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of  which makes no sense
### * got 'no response received
###     SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
###                       community: "public"
###                      request ID: -113874708
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
#
# Target[localhost_3]: 3:public@localhost:
# SetEnv[localhost_3]: MRTG_INT_IP="" MRTG_INT_DESCR="eth1"
# MaxBytes[localhost_3]: 0
# Title[localhost_3]: Traffic Analysis for 3 -- linuxserver
# PageTop[localhost_3]: <H1>Traffic Analysis for 3 -- linuxserver</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>linuxserver in Unknown (edit /etc/snmp/snmpd.conf)</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD>Root &lt;root@localhost&gt; (configure /etc/snmp/snmp.local.conf)</TD></TR>
#    <TR><TD>Description:</TD><TD>eth1  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD> ()</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#  </TABLE>


### Interface 4 >> Descr: 'ppp0' | Name: '' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * has a speed of  which makes no sense
### * got 'Received SNMP response with error code
###       error status: noSuchName
###       index 1 (OID: 1.3.6.1.2.1.2.2.1.10.4)
###     SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
###                       community: "public"
###                      request ID: -113874707
###                     PDU bufsize: 8000 bytes
###                         timeout: 2s
###                         retries: 5
###                         backoff: 1)' from interface when trying to query
#
# Target[localhost_4]: 4:public@localhost:
# SetEnv[localhost_4]: MRTG_INT_IP="" MRTG_INT_DESCR="ppp0"
# MaxBytes[localhost_4]: 0
# Title[localhost_4]: Traffic Analysis for 4 -- linuxserver
# PageTop[localhost_4]: <H1>Traffic Analysis for 4 -- linuxserver</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>linuxserver in Unknown (edit /etc/snmp/snmpd.conf)</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD>Root &lt;root@localhost&gt; (configure /etc/snmp/snmp.local.conf)</TD></TR>
#    <TR><TD>Description:</TD><TD>ppp0  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD> ()</TD></TR>
#    <TR><TD>ifName:</TD>     <TD></TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>0.0 Bytes/s</TD></TR>
#  </TABLE>


[/quoto]

victoryan

使用指令,检查是否有结果
# snmpwalk -v 1 -c public localhost  .1.3.6.1.2.1.2.2.1.10
IF-MIB::ifInOctets.1 = Counter32: 729209
IF-MIB::ifInOctets.2 = Counter32: 3535618
如果有类似的显示,则snmpd运行基本正常,
修改mrtg.cfg即可

hgkrt

执行上述命令,返回Timeout:No Response...

victoryan

参考
http://www.linuxsir.cn/forum.php?mod=viewthread&tid=87742

//修改配置文件/etc/snmp/snmpd.conf，允许mrtg读取网络接口的流量数据。
将
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.25.1.1
修改为：
view systemview included .1.3.6.1.2.1.1
view systemview included .1.3.6.1.2.1.2
view systemview included .1.3.6.1.2.1.25.1.1
//打开SNMPD服务
# chkconfig snmpd on
# service snmpd start

再重新测试#snmpwalk -v 1 -c public localhost .1.3.6.1.2.1.2.2.1.10

hgkrt

我就是参考他做的..所以才奇怪为啥不行...

才要个snmp.conf来看看...

victoryan

使用指令,检查是否有结果
#snmpwalk -v 1 -c public localhost uptime
system.sysUpTime.0 = Timeticks: (33930645) 3 days, 22:15:06.45

hgkrt

不管执行什么...都是一个结果::

Timeout: No Response from localhost

所以,还是赶快把snmp.conf给我看看得了...

victoryan

兄弟,这么着急,我的snmpd.conf如下

com2sec notConfigUser  default       public
  
group   notConfigGroup v1            notConfigUser
group   notConfigGroup v2c           notConfigUser
  
view    systemview    included   .1.3.6.1.2.1.1
view    systemview    included   .1.3.6.1.2.1.2
view    systemview    included   .1.3.6.1.2.1.25.1.1
  
  
access  notConfigGroup ""      any       noauth    exact  systemview none none
  
syslocation Unknown (edit /etc/snmp/snmpd.conf)
syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
  
pass .1.3.6.1.4.1.4413.4.1 /usr/bin/ucd5820stat

passerchia

按照楼上的snmpd.conf和之前mrtg.cfg运行mrtg时得到以下错误信息:
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 2 (OID: 1.3.6.1.2.1.25.1.6.0)
SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
                  community: "public"
                 request ID: 442115856
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
at /usr/local/mrtg/bin/../lib/mrtg2/SNMP_util.pm line 487
SNMPGET Problem for hrSystemProcesses.0 hrSystemProcesses.0 sysUptime sysName on public@localhost::::::v4only
at /usr/local/mrtg/bin/mrtg line 1835
ERROR: Target[mem][_IN_] ' $target->[2]{$mode} ' did not eval into defined data
ERROR: Target[mem][_OUT_] ' $target->[2]{$mode} ' did not eval into defined data
ERROR: Target[disk][_IN_] ' $target->[4]{$mode} ' did not eval into defined data
ERROR: Target[disk][_OUT_] ' $target->[4]{$mode} ' did not eval into defined data
ERROR: Target[process][_IN_] ' $target->[5]{$mode} ' did not eval into defined data
ERROR: Target[process][_OUT_] ' $target->[5]{$mode} ' did not eval into defined data