LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 825|回复: 2

安装Gentoo遇到问题

[复制链接]
发表于 2007-6-17 16:23:21 | 显示全部楼层 |阅读模式
我是在ubuntu下先mount 分区,然后再chroot的方式来安装gentoo的
boot,home和swap分区和ubuntu共用,现在遇到不少问题,gentoo已经可以启动到命令行方式了
由于是自己编译的内核,对此编译内核不太了解,估计驱动这一块,问题很多,,比如eth0不能启动,说是检查驱动等等


请问题下面这个问题怎么解决,启动的时候出现了好多 类似下面的-1 Invalid module format的信息
# insmod /lib/modules/2.6.20-gentoo-r8/build/drivers/net/via-rhine.o
insmod: error inserting '/lib/modules/2.6.20-gentoo-r8/build/drivers/net/via-rhine.o': -1 Invalid module format
 楼主| 发表于 2007-6-17 16:28:02 | 显示全部楼层
/var/log/messages 内容如下


Jun 17 16:09:46 localhost syslog-ng[4287]: syslog-ng version 1.6.11 starting
Jun 17 16:09:46 localhost syslog-ng[4287]: Changing permissions on special file /dev/tty12
Jun 17 16:09:46 localhost Linux version 2.6.20-gentoo-r8 (root@mypc) (gcc 版本 4.1.1 (Gentoo 4.1.1-r3)) #1 SMP Sat Jun 16 10:58:33 CST 2007
Jun 17 16:09:46 localhost BIOS-provided physical RAM map:
Jun 17 16:09:46 localhost sanitize start
Jun 17 16:09:46 localhost sanitize end
Jun 17 16:09:46 localhost copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
Jun 17 16:09:46 localhost copy_e820_map() type is E820_RAM
Jun 17 16:09:46 localhost copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
Jun 17 16:09:46 localhost copy_e820_map() start: 0000000000100000 size: 000000004fdf0000 end: 000000004fef0000 type: 1
Jun 17 16:09:46 localhost copy_e820_map() type is E820_RAM
Jun 17 16:09:46 localhost copy_e820_map() start: 000000004fef0000 size: 0000000000003000 end: 000000004fef3000 type: 4
Jun 17 16:09:46 localhost copy_e820_map() start: 000000004fef3000 size: 000000000000d000 end: 000000004ff00000 type: 3
Jun 17 16:09:46 localhost copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
Jun 17 16:09:46 localhost copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
Jun 17 16:09:46 localhost copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
Jun 17 16:09:46 localhost BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
Jun 17 16:09:46 localhost BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Jun 17 16:09:46 localhost BIOS-e820: 0000000000100000 - 000000004fef0000 (usable)
Jun 17 16:09:46 localhost BIOS-e820: 000000004fef0000 - 000000004fef3000 (ACPI NVS)
Jun 17 16:09:46 localhost BIOS-e820: 000000004fef3000 - 000000004ff00000 (ACPI data)
Jun 17 16:09:46 localhost BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Jun 17 16:09:46 localhost BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Jun 17 16:09:46 localhost BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Jun 17 16:09:46 localhost 382MB HIGHMEM available.
Jun 17 16:09:46 localhost 896MB LOWMEM available.
Jun 17 16:09:46 localhost found SMP MP-table at 000f5b90
Jun 17 16:09:46 localhost Entering add_active_range(0, 0, 327408) 0 entries of 256 used
Jun 17 16:09:46 localhost Zone PFN ranges:
Jun 17 16:09:46 localhost DMA             0 ->     4096
Jun 17 16:09:46 localhost Normal       4096 ->   229376
Jun 17 16:09:46 localhost HighMem    229376 ->   327408
Jun 17 16:09:46 localhost early_node_map[1] active PFN ranges
Jun 17 16:09:46 localhost 0:        0 ->   327408
Jun 17 16:09:46 localhost On node 0 totalpages: 327408
Jun 17 16:09:46 localhost DMA zone: 32 pages used for memmap
Jun 17 16:09:46 localhost DMA zone: 0 pages reserved
Jun 17 16:09:46 localhost DMA zone: 4064 pages, LIFO batch:0
Jun 17 16:09:46 localhost Normal zone: 1760 pages used for memmap
Jun 17 16:09:46 localhost Normal zone: 223520 pages, LIFO batch:31
Jun 17 16:09:46 localhost HighMem zone: 765 pages used for memmap
Jun 17 16:09:46 localhost HighMem zone: 97267 pages, LIFO batch:31
Jun 17 16:09:46 localhost DMI 2.2 present.
Jun 17 16:09:46 localhost Using APIC driver default
Jun 17 16:09:46 localhost ACPI: RSDP (v000 KT600                                 ) @ 0x000f7580
Jun 17 16:09:46 localhost ACPI: RSDT (v001 KT600  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x4fef3000
Jun 17 16:09:46 localhost ACPI: FADT (v001 KT600  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x4fef3040
Jun 17 16:09:46 localhost ACPI: MADT (v001 KT600  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x4fef7a00
Jun 17 16:09:46 localhost ACPI: DSDT (v001 KT600  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
Jun 17 16:09:46 localhost ACPI: PM-Timer IO Port: 0x4008
Jun 17 16:09:46 localhost ACPI: Local APIC address 0xfee00000
Jun 17 16:09:46 localhost ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Jun 17 16:09:46 localhost Processor #0 6:8 APIC version 16
Jun 17 16:09:46 localhost ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jun 17 16:09:46 localhost ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Jun 17 16:09:46 localhost IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Jun 17 16:09:46 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 17 16:09:46 localhost ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
Jun 17 16:09:46 localhost ACPI: IRQ0 used by override.
Jun 17 16:09:46 localhost ACPI: IRQ2 used by override.
Jun 17 16:09:46 localhost ACPI: IRQ9 used by override.
Jun 17 16:09:46 localhost Enabling APIC mode:  Flat.  Using 1 I/O APICs
Jun 17 16:09:46 localhost Using ACPI (MADT) for SMP configuration information
Jun 17 16:09:46 localhost Allocating PCI resources starting at 50000000 (gap: 4ff00000:aed00000)
Jun 17 16:09:46 localhost Detected 1692.480 MHz processor.
Jun 17 16:09:46 localhost Built 1 zonelists.  Total pages: 324851
Jun 17 16:09:46 localhost Kernel command line: root=/dev/hda5
Jun 17 16:09:46 localhost mapped APIC to ffffd000 (fee00000)
Jun 17 16:09:46 localhost mapped IOAPIC to ffffc000 (fec00000)
Jun 17 16:09:46 localhost Enabling fast FPU save and restore... done.
Jun 17 16:09:46 localhost Enabling unmasked SIMD FPU exception support... done.
Jun 17 16:09:46 localhost Initializing CPU#0
Jun 17 16:09:46 localhost PID hash table entries: 4096 (order: 12, 16384 bytes)
Jun 17 16:09:46 localhost Console: colour VGA+ 80x25
Jun 17 16:09:46 localhost Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jun 17 16:09:46 localhost Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun 17 16:09:46 localhost Memory: 1291912k/1309632k available (3089k kernel code, 16628k reserved, 1506k data, 264k init, 392128k highmem)
Jun 17 16:09:46 localhost virtual kernel memory layout:
Jun 17 16:09:46 localhost fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)
Jun 17 16:09:46 localhost pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
Jun 17 16:09:46 localhost vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
Jun 17 16:09:46 localhost lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
Jun 17 16:09:46 localhost .init : 0xc0585000 - 0xc05c7000   ( 264 kB)
Jun 17 16:09:46 localhost .data : 0xc0404627 - 0xc057cf10   (1506 kB)
Jun 17 16:09:46 localhost .text : 0xc0100000 - 0xc0404627   (3089 kB)
Jun 17 16:09:46 localhost Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jun 17 16:09:46 localhost Calibrating delay using timer specific routine.. 3388.01 BogoMIPS (lpj=6776028)
Jun 17 16:09:46 localhost Mount-cache hash table entries: 512
Jun 17 16:09:46 localhost CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
Jun 17 16:09:46 localhost CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Jun 17 16:09:46 localhost CPU: L2 Cache: 256K (64 bytes/line)
Jun 17 16:09:46 localhost CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Jun 17 16:09:46 localhost Intel machine check architecture supported.
Jun 17 16:09:46 localhost Intel machine check reporting enabled on CPU#0.
Jun 17 16:09:46 localhost Compat vDSO mapped to ffffe000.
Jun 17 16:09:46 localhost Checking 'hlt' instruction... OK.
Jun 17 16:09:46 localhost SMP alternatives: switching to UP code
Jun 17 16:09:46 localhost Freeing SMP alternatives: 18k freed
Jun 17 16:09:46 localhost ACPI: Core revision 20060707
Jun 17 16:09:46 localhost tbxface-0107 [01] load_tables           : ACPI Tables successfully acquired
Jun 17 16:09:46 localhost Parsing all Control Methods:
Jun 17 16:09:46 localhost Table [DSDT](id 0005) - 608 Objects with 57 Devices 167 Methods 27 Regions
Jun 17 16:09:46 localhost ACPI Namespace successfully loaded at root c0628c10
Jun 17 16:09:46 localhost evxfevnt-0089 [02] enable                : Transition to ACPI mode successful
Jun 17 16:09:46 localhost CPU0: AMD Athlon(tm) XP 2000+ stepping 01
Jun 17 16:09:46 localhost Total of 1 processors activated (3388.01 BogoMIPS).
Jun 17 16:09:46 localhost ENABLING IO-APIC IRQs
Jun 17 16:09:46 localhost ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Jun 17 16:09:46 localhost Brought up 1 CPUs
Jun 17 16:09:46 localhost NET: Registered protocol family 16
Jun 17 16:09:46 localhost ACPI: bus type pci registered
Jun 17 16:09:46 localhost PCI: PCI BIOS revision 2.10 entry at 0xfaf40, last bus=1
Jun 17 16:09:46 localhost PCI: Using configuration type 1
Jun 17 16:09:46 localhost Setting up standard PCI resources
Jun 17 16:09:46 localhost evgpeblk-0951 [04] ev_create_gpe_block   : GPE 00 to 0F [_GPE] 2 regs on int 0x9
Jun 17 16:09:46 localhost evgpeblk-1048 [03] ev_initialize_gpe_bloc: Found 6 Wake, Enabled 1 Runtime GPEs in this block
Jun 17 16:09:46 localhost Completing Region/Field/Buffer/Package initialization:..........................................................................
Jun 17 16:09:46 localhost Initialized 27/27 Regions 18/18 Fields 17/17 Buffers 12/21 Packages (617 nodes)
Jun 17 16:09:46 localhost Initializing Device/Processor/Thermal objects by executing _INI methods:..
Jun 17 16:09:46 localhost Executed 2 _INI methods requiring 1 _STA executions (examined 61 objects)
Jun 17 16:09:46 localhost ACPI: Interpreter enabled
Jun 17 16:09:46 localhost ACPI: Using IOAPIC for interrupt routing
Jun 17 16:09:46 localhost ACPI: PCI Root Bridge [PCI0] (0000:00)
Jun 17 16:09:46 localhost PCI: Probing PCI hardware (bus 00)
Jun 17 16:09:46 localhost ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Jun 17 16:09:46 localhost Boot video device is 0000:01:00.0
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12)
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Jun 17 16:09:46 localhost ACPI: Power Resource [PFAN] (off)
Jun 17 16:09:46 localhost SCSI subsystem initialized
Jun 17 16:09:46 localhost libata version 2.00 loaded.
Jun 17 16:09:46 localhost usbcore: registered new interface driver usbfs
Jun 17 16:09:46 localhost usbcore: registered new interface driver hub
Jun 17 16:09:46 localhost usbcore: registered new device driver usb
Jun 17 16:09:46 localhost PCI: Using ACPI for IRQ routing
Jun 17 16:09:46 localhost PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Jun 17 16:09:46 localhost PCI: Bridge: 0000:00:01.0
Jun 17 16:09:46 localhost IO window: a000-afff
Jun 17 16:09:46 localhost MEM window: e0000000-e1ffffff
Jun 17 16:09:46 localhost PREFETCH window: c0000000-dfffffff
Jun 17 16:09:46 localhost PCI: Setting latency timer of device 0000:00:01.0 to 64
Jun 17 16:09:46 localhost NET: Registered protocol family 2
Jun 17 16:09:46 localhost IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun 17 16:09:46 localhost TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jun 17 16:09:46 localhost TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Jun 17 16:09:46 localhost TCP: Hash tables configured (established 131072 bind 65536)
Jun 17 16:09:46 localhost TCP reno registered
Jun 17 16:09:46 localhost Machine check exception polling timer started.
Jun 17 16:09:46 localhost microcode: CPU0 not a capable Intel processor
Jun 17 16:09:46 localhost IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
Jun 17 16:09:46 localhost highmem bounce pool size: 64 pages
Jun 17 16:09:46 localhost Total HugeTLB memory allocated, 0
Jun 17 16:09:46 localhost Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jun 17 16:09:46 localhost io scheduler noop registered
Jun 17 16:09:46 localhost io scheduler anticipatory registered (default)
Jun 17 16:09:46 localhost io scheduler deadline registered
Jun 17 16:09:46 localhost io scheduler cfq registered
Jun 17 16:09:46 localhost PCI: Bypassing VIA 8237 APIC De-Assert Message
Jun 17 16:09:46 localhost Real Time Clock Driver v1.12ac
Jun 17 16:09:46 localhost Linux agpgart interface v0.101 (c) Dave Jones
Jun 17 16:09:46 localhost Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
Jun 17 16:09:46 localhost Hangcheck: Using get_cycles().
Jun 17 16:09:46 localhost input: Power Button (FF) as /class/input/input0
Jun 17 16:09:46 localhost ACPI: Power Button (FF) [PWRF]
Jun 17 16:09:46 localhost input: Power Button (CM) as /class/input/input1
Jun 17 16:09:46 localhost ACPI: Power Button (CM) [PWRB]
Jun 17 16:09:46 localhost input: Sleep Button (CM) as /class/input/input2
Jun 17 16:09:46 localhost ACPI: Sleep Button (CM) [SLPB]
Jun 17 16:09:46 localhost ACPI: Transitioning device [FAN] to D3
Jun 17 16:09:46 localhost ACPI: Transitioning device [FAN] to D3
Jun 17 16:09:46 localhost ACPI: Fan [FAN] (off)
Jun 17 16:09:46 localhost ACPI: CPU0 (power states: C1[C1] C2[C2])
Jun 17 16:09:46 localhost ACPI: Thermal Zone [THRM] (62 C)
Jun 17 16:09:46 localhost Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Jun 17 16:09:46 localhost serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 17 16:09:46 localhost FDC 0 is a post-1991 82077
Jun 17 16:09:46 localhost RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Jun 17 16:09:46 localhost loop: loaded (max 8 devices)
Jun 17 16:09:46 localhost Intel(R) PRO/1000 Network Driver - version 7.3.15-k2
Jun 17 16:09:46 localhost Copyright (c) 1999-2006 Intel Corporation.
Jun 17 16:09:46 localhost e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
Jun 17 16:09:46 localhost e100: Copyright(c) 1999-2006 Intel Corporation
Jun 17 16:09:46 localhost forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
Jun 17 16:09:46 localhost netconsole: not configured, aborting
Jun 17 16:09:46 localhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jun 17 16:09:46 localhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jun 17 16:09:46 localhost Probing IDE interface ide0...
Jun 17 16:09:46 localhost hda: ST3160215A, ATA DISK drive
Jun 17 16:09:46 localhost hdb: ST380011A, ATA DISK drive
Jun 17 16:09:46 localhost Probing IDE interface ide1...
Jun 17 16:09:46 localhost hdd: ASUS DRW-1608P, ATAPI CD/DVD-ROM drive
Jun 17 16:09:46 localhost ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 17 16:09:46 localhost ide1 at 0x170-0x177,0x376 on irq 15
Jun 17 16:09:46 localhost hda: max request size: 512KiB
Jun 17 16:09:46 localhost hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63
Jun 17 16:09:46 localhost hda: cache flushes supported
Jun 17 16:09:46 localhost hda: hda1 hda2 < hda5 hda6 hda7 hda8 > hda3 hda4
Jun 17 16:09:46 localhost hdb: max request size: 512KiB
Jun 17 16:09:46 localhost hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
Jun 17 16:09:46 localhost hdb: cache flushes supported
Jun 17 16:09:46 localhost hdb: hdb1 hdb2 < hdb5 hdb6 >
Jun 17 16:09:46 localhost hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Jun 17 16:09:46 localhost Uniform CD-ROM driver Revision: 3.20
Jun 17 16:09:46 localhost 3ware Storage Controller device driver for Linux v1.26.02.002.
Jun 17 16:09:46 localhost sata_via 0000:00:0f.0: version 2.0
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Jun 17 16:09:46 localhost ACPI: PCI Interrupt 0000:00:0f.0 -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
Jun 17 16:09:46 localhost sata_via 0000:00:0f.0: routed to hard irq line 11
Jun 17 16:09:46 localhost ata1: SATA max UDMA/133 cmd 0xB000 ctl 0xB402 bmdma 0xC000 irq 16
Jun 17 16:09:46 localhost ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xBC02 bmdma 0xC008 irq 16
Jun 17 16:09:46 localhost scsi0 : sata_via
Jun 17 16:09:46 localhost ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Jun 17 16:09:46 localhost ATA: abnormal status 0x7F on port 0xB007
Jun 17 16:09:46 localhost ACPI: PCI Interrupt 0000:00:10.3 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: UHCI Host Controller
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: irq 17, io base 0x0000d800
Jun 17 16:09:46 localhost usb usb5: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost hub 5-0:1.0: USB hub found
Jun 17 16:09:46 localhost hub 5-0:1.0: 2 ports detected
Jun 17 16:09:46 localhost usb 2-2: new low speed USB device using uhci_hcd and address 2
Jun 17 16:09:46 localhost usb 2-2: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost usbcore: registered new interface driver usblp
Jun 17 16:09:46 localhost drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jun 17 16:09:46 localhost Initializing USB Mass Storage driver...
Jun 17 16:09:46 localhost usbcore: registered new interface driver usb-storage
Jun 17 16:09:46 localhost USB Mass Storage support registered.
Jun 17 16:09:46 localhost input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input3
Jun 17 16:09:46 localhost input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.0-2
Jun 17 16:09:46 localhost usbcore: registered new interface driver usbhid
Jun 17 16:09:46 localhost drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jun 17 16:09:46 localhost serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 17 16:09:46 localhost serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 17 16:09:46 localhost mice: PS/2 mouse device common for all mice
Jun 17 16:09:46 localhost input: AT Translated Set 2 keyboard as /class/input/input4
Jun 17 16:09:46 localhost device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Jun 17 16:09:46 localhost Intel 810 + AC97 Audio, version 1.01, 10:56:12 Jun 16 2007
Jun 17 16:09:46 localhost oprofile: using NMI interrupt.
Jun 17 16:09:46 localhost TCP cubic registered
Jun 17 16:09:46 localhost NET: Registered protocol family 1
Jun 17 16:09:46 localhost NET: Registered protocol family 10
Jun 17 16:09:46 localhost IPv6 over IPv4 tunneling driver
Jun 17 16:09:46 localhost NET: Registered protocol family 17
Jun 17 16:09:46 localhost powernow-k8: Processor cpuid 681 not supported
Jun 17 16:09:46 localhost Using IPI Shortcut mode
Jun 17 16:09:46 localhost Time: tsc clocksource has been installed.
Jun 17 16:09:46 localhost Time: acpi_pm clocksource has been installed.
Jun 17 16:09:46 localhost EXT3-fs: INFO: recovery required on readonly filesystem.
Jun 17 16:09:46 localhost EXT3-fs: write access will be enabled during recovery.
Jun 17 16:09:46 localhost kjournald starting.  Commit interval 5 seconds
Jun 17 16:09:46 localhost EXT3-fs: recovery complete.
Jun 17 16:09:46 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jun 17 16:09:46 localhost VFS: Mounted root (ext3 filesystem) readonly.
Jun 17 16:09:46 localhost Freeing unused kernel memory: 264k freed
Jun 17 16:09:46 localhost ACPI: PCI Interrupt 0000:00:10.3 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: UHCI Host Controller
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: irq 17, io base 0x0000d800
Jun 17 16:09:46 localhost usb usb5: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost hub 5-0:1.0: USB hub found
Jun 17 16:09:46 localhost hub 5-0:1.0: 2 ports detected
Jun 17 16:09:46 localhost usb 2-2: new low speed USB device using uhci_hcd and address 2
Jun 17 16:09:46 localhost usb 2-2: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost usbcore: registered new interface driver usblp
Jun 17 16:09:46 localhost drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jun 17 16:09:46 localhost Initializing USB Mass Storage driver...
Jun 17 16:09:46 localhost usbcore: registered new interface driver usb-storage
Jun 17 16:09:46 localhost USB Mass Storage support registered.
Jun 17 16:09:46 localhost input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input3
Jun 17 16:09:46 localhost input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.0-2
Jun 17 16:09:46 localhost usbcore: registered new interface driver usbhid
Jun 17 16:09:46 localhost drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jun 17 16:09:46 localhost serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 17 16:09:46 localhost serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 17 16:09:46 localhost mice: PS/2 mouse device common for all mice
Jun 17 16:09:46 localhost input: AT Translated Set 2 keyboard as /class/input/input4
Jun 17 16:09:46 localhost device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Jun 17 16:09:46 localhost Intel 810 + AC97 Audio, version 1.01, 10:56:12 Jun 16 2007
Jun 17 16:09:46 localhost oprofile: using NMI interrupt.
Jun 17 16:09:46 localhost TCP cubic registered
Jun 17 16:09:46 localhost NET: Registered protocol family 1
Jun 17 16:09:46 localhost NET: Registered protocol family 10
Jun 17 16:09:46 localhost IPv6 over IPv4 tunneling driver
Jun 17 16:09:46 localhost NET: Registered protocol family 17
Jun 17 16:09:46 localhost powernow-k8: Processor cpuid 681 not supported
Jun 17 16:09:46 localhost Using IPI Shortcut mode
Jun 17 16:09:46 localhost Time: tsc clocksource has been installed.
Jun 17 16:09:46 localhost Time: acpi_pm clocksource has been installed.
Jun 17 16:09:46 localhost EXT3-fs: INFO: recovery required on readonly filesystem.
Jun 17 16:09:46 localhost EXT3-fs: write access will be enabled during recovery.
Jun 17 16:09:46 localhost kjournald starting.  Commit interval 5 seconds
Jun 17 16:09:46 localhost EXT3-fs: recovery complete.
Jun 17 16:09:46 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jun 17 16:09:46 localhost VFS: Mounted root (ext3 filesystem) readonly.
Jun 17 16:09:46 localhost Freeing unused kernel memory: 264k freed
Jun 17 16:09:46 localhost v
Jun 17 16:09:46 localhost v
Jun 17 16:09:46 localhost scsi1 : sata_via
Jun 17 16:09:46 localhost ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Jun 17 16:09:46 localhost ATA: abnormal status 0x7F on port 0xB807
Jun 17 16:09:46 localhost Fusion MPT base driver 3.04.03
Jun 17 16:09:46 localhost Copyright (c) 1999-2007 LSI Logic Corporation
Jun 17 16:09:46 localhost Fusion MPT SPI Host driver 3.04.03
Jun 17 16:09:46 localhost ieee1394: raw1394: /dev/raw1394 device initialized
Jun 17 16:09:46 localhost usbmon: debugfs is not available
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
Jun 17 16:09:46 localhost ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Jun 17 16:09:46 localhost ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Jun 17 16:09:46 localhost ehci_hcd 0000:00:10.4: EHCI Host Controller
Jun 17 16:09:46 localhost ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
Jun 17 16:09:46 localhost ehci_hcd 0000:00:10.4: irq 17, io mem 0xe2400000
Jun 17 16:09:46 localhost ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Jun 17 16:09:46 localhost usb usb1: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost hub 1-0:1.0: USB hub found
Jun 17 16:09:46 localhost hub 1-0:1.0: 8 ports detected
Jun 17 16:09:46 localhost ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Jun 17 16:09:46 localhost USB Universal Host Controller Interface driver v3.0
Jun 17 16:09:46 localhost ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.0: UHCI Host Controller
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.0: irq 17, io base 0x0000cc00
Jun 17 16:09:46 localhost usb usb2: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost hub 2-0:1.0: USB hub found
Jun 17 16:09:46 localhost hub 2-0:1.0: 2 ports detected
Jun 17 16:09:46 localhost ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Jun 17 16:09:46 localhost ACPI: PCI Interrupt 0000:00:10.3 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: UHCI Host Controller
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: irq 17, io base 0x0000d800
Jun 17 16:09:46 localhost usb usb5: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost hub 5-0:1.0: USB hub found
Jun 17 16:09:46 localhost hub 5-0:1.0: 2 ports detected
Jun 17 16:09:46 localhost usb 2-2: new low speed USB device using uhci_hcd and address 2
Jun 17 16:09:46 localhost usb 2-2: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost usbcore: registered new interface driver usblp
Jun 17 16:09:46 localhost drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jun 17 16:09:46 localhost Initializing USB Mass Storage driver...
Jun 17 16:09:46 localhost usbcore: registered new interface driver usb-storage
Jun 17 16:09:46 localhost USB Mass Storage support registered.
Jun 17 16:09:46 localhost input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input3
Jun 17 16:09:46 localhost input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.0-2
Jun 17 16:09:46 localhost usbcore: registered new interface driver usbhid
Jun 17 16:09:46 localhost drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jun 17 16:09:46 localhost serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 17 16:09:46 localhost serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 17 16:09:46 localhost mice: PS/2 mouse device common for all mice
Jun 17 16:09:46 localhost input: AT Translated Set 2 keyboard as /class/input/input4
Jun 17 16:09:46 localhost device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Jun 17 16:09:46 localhost Intel 810 + AC97 Audio, version 1.01, 10:56:12 Jun 16 2007
Jun 17 16:09:46 localhost oprofile: using NMI interrupt.
Jun 17 16:09:46 localhost TCP cubic registered
Jun 17 16:09:46 localhost NET: Registered protocol family 1
Jun 17 16:09:46 localhost NET: Registered protocol family 10
Jun 17 16:09:46 localhost IPv6 over IPv4 tunneling driver
Jun 17 16:09:46 localhost NET: Registered protocol family 17
Jun 17 16:09:46 localhost powernow-k8: Processor cpuid 681 not supported
Jun 17 16:09:46 localhost Using IPI Shortcut mode
Jun 17 16:09:46 localhost Time: tsc clocksource has been installed.
Jun 17 16:09:46 localhost Time: acpi_pm clocksource has been installed.
Jun 17 16:09:46 localhost EXT3-fs: INFO: recovery required on readonly filesystem.
Jun 17 16:09:46 localhost EXT3-fs: write access will be enabled during recovery.
Jun 17 16:09:46 localhost kjournald starting.  Commit interval 5 seconds
Jun 17 16:09:46 localhost EXT3-fs: recovery complete.
Jun 17 16:09:46 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jun 17 16:09:46 localhost VFS: Mounted root (ext3 filesystem) readonly.
Jun 17 16:09:46 localhost Freeing unused kernel memory: 264k freed
Jun 17 16:09:46 localhost v
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.1: UHCI Host Controller
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d000
Jun 17 16:09:46 localhost usb usb3: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost hub 3-0:1.0: USB hub found
Jun 17 16:09:46 localhost hub 3-0:1.0: 2 ports detected
Jun 17 16:09:46 localhost ACPI: PCI Interrupt 0000:00:10.2 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.2: UHCI Host Controller
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.2: irq 17, io base 0x0000d400
Jun 17 16:09:46 localhost usb usb4: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost hub 4-0:1.0: USB hub found
Jun 17 16:09:46 localhost hub 4-0:1.0: 2 ports detected
Jun 17 16:09:46 localhost ACPI: PCI Interrupt 0000:00:10.3 -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: UHCI Host Controller
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Jun 17 16:09:46 localhost uhci_hcd 0000:00:10.3: irq 17, io base 0x0000d800
Jun 17 16:09:46 localhost usb usb5: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost hub 5-0:1.0: USB hub found
Jun 17 16:09:46 localhost hub 5-0:1.0: 2 ports detected
Jun 17 16:09:46 localhost usb 2-2: new low speed USB device using uhci_hcd and address 2
Jun 17 16:09:46 localhost usb 2-2: configuration #1 chosen from 1 choice
Jun 17 16:09:46 localhost usbcore: registered new interface driver usblp
Jun 17 16:09:46 localhost drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Jun 17 16:09:46 localhost Initializing USB Mass Storage driver...
Jun 17 16:09:46 localhost usbcore: registered new interface driver usb-storage
Jun 17 16:09:46 localhost USB Mass Storage support registered.
Jun 17 16:09:46 localhost input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input3
Jun 17 16:09:46 localhost input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:10.0-2
Jun 17 16:09:46 localhost usbcore: registered new interface driver usbhid
Jun 17 16:09:46 localhost drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Jun 17 16:09:46 localhost serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 17 16:09:46 localhost serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 17 16:09:46 localhost mice: PS/2 mouse device common for all mice
Jun 17 16:09:46 localhost input: AT Translated Set 2 keyboard as /class/input/input4
Jun 17 16:09:46 localhost device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
Jun 17 16:09:46 localhost Intel 810 + AC97 Audio, version 1.01, 10:56:12 Jun 16 2007
Jun 17 16:09:46 localhost oprofile: using NMI interrupt.
Jun 17 16:09:46 localhost TCP cubic registered
Jun 17 16:09:46 localhost NET: Registered protocol family 1
Jun 17 16:09:46 localhost NET: Registered protocol family 10
Jun 17 16:09:46 localhost IPv6 over IPv4 tunneling driver
Jun 17 16:09:46 localhost NET: Registered protocol family 17
Jun 17 16:09:46 localhost powernow-k8: Processor cpuid 681 not supported
Jun 17 16:09:46 localhost Using IPI Shortcut mode
Jun 17 16:09:46 localhost Time: tsc clocksource has been installed.
Jun 17 16:09:46 localhost Time: acpi_pm clocksource has been installed.
Jun 17 16:09:46 localhost EXT3-fs: INFO: recovery required on readonly filesystem.
Jun 17 16:09:46 localhost EXT3-fs: write access will be enabled during recovery.
Jun 17 16:09:46 localhost kjournald starting.  Commit interval 5 seconds
Jun 17 16:09:46 localhost EXT3-fs: recovery complete.
Jun 17 16:09:46 localhost EXT3-fs: mounted filesystem with ordered data mode.
Jun 17 16:09:46 localhost VFS: Mounted root (ext3 filesystem) readonly.
Jun 17 16:09:46 localhost Freeing unused kernel memory: 264k freed
Jun 17 16:09:46 localhost via82cxxx: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost snd: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost snd_rawmidi: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost snd_mpu401_uart: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost snd_page_alloc: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost snd_timer: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost snd_pcm: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost ac97_bus: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost snd_ac97_codec: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost snd_via82xx: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost via82cxxx_audio: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost cfbfillrect: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost cfbimgblt: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost i2c_core: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost cfbcopyarea: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost i2c_algo_bit: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost fb_ddc: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost fb: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost radeonfb: version magic '2.6.20-gentoo-r8 SMP mod_unload K7 ' should be '2.6.20-gentoo-r8 SMP mod_unload PENTIUMIII '
Jun 17 16:09:46 localhost device-mapper: table: 254:0: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:0: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:0: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:0: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:0: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:0: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:0: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost EXT3 FS on hda5, internal journal
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost device-mapper: table: 254:3: linear: dm-linear: Device lookup failed
Jun 17 16:09:46 localhost device-mapper: ioctl: error adding target to table
Jun 17 16:09:46 localhost EXT3-fs: Unrecognized mount option "default" or missing value
Jun 17 16:09:46 localhost Adding 618460k swap on /dev/hda8.  Priority:-1 extents:1 across:618460k
Jun 17 16:09:47 localhost rc-scripts: network interface eth0 does not exist
Jun 17 16:09:47 localhost rc-scripts: Please verify hardware or kernel module (driver)
Jun 17 16:09:48 localhost pppd[5122]: unrecognized option 'eth0'
Jun 17 16:09:48 localhost cron[5261]: (CRON) STARTUP (V5.0)
Jun 17 16:09:57 localhost login(pam_unix)[5332]: session opened for user root by (uid=0)
Jun 17 16:09:57 localhost login[5350]: ROOT LOGIN  on 'tty1'
Jun 17 16:10:01 localhost cron[5357]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )
Jun 17 16:10:30 localhost rc-scripts: network interface eth0 does not exist
Jun 17 16:10:30 localhost rc-scripts: Please verify hardware or kernel module (driver)
Jun 17 16:10:43 localhost shutdown[5750]: shutting down for system reboot
Jun 17 16:10:43 localhost init: Switching to runlevel: 6
Jun 17 16:10:46 localhost syslog-ng[4287]: syslog-ng version 1.6.11 going down
回复 支持 反对

使用道具 举报

发表于 2007-6-17 16:57:19 | 显示全部楼层
Post by showboy

# insmod /lib/modules/2.6.20-gentoo-r8/build/drivers/net/via-rhine.o
insmod: error inserting '/lib/modules/2.6.20-gentoo-r8/build/drivers/net/via-rhine.o': -1 Invalid module format

发生这种情况,立即看dmesg的结果,注意最后的信息
假设你目前运行的内核是从位于/usr/src/linux里的源代码编译出来的,只要使用当时编译内核使用的.config文件,在/usr/src/linux里再make一下,然后make modules_install,即可解决问题
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表