LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 2600|回复: 13

Thinkpad T60 ati X1300的glxgear 真的这么差吗?

[复制链接]
发表于 2007-4-15 15:15:53 | 显示全部楼层 |阅读模式
难倒是x1300显卡很差吗?还是我的配制问题的?

walter@localhost ~ $ glxgears
8445 frames in 5.0 seconds = 1688.998 FPS
8488 frames in 5.0 seconds = 1697.595 FPS
8488 frames in 5.0 seconds = 1697.559 FPS
8488 frames in 5.0 seconds = 1697.551 FPS

walter@localhost ~ $ fgl_fglxgears
Using GLX_SGIX_pbuffer
1520 frames in 5.0 seconds = 304.000 FPS
1752 frames in 5.0 seconds = 350.400 FPS
1748 frames in 5.0 seconds = 349.600 FPS
1752 frames in 5.0 seconds = 350.400 FPS

我的配置信息:
walter@localhost ~ $ lsmod
Module                  Size  Used by
fuse                   43540  2
nfsd                   97576  13
exportfs                8832  1 nfsd
nfs                   122172  0
lockd                  61704  3 nfsd,nfs
nfs_acl                 7040  2 nfsd,nfs
sunrpc                143164  11 nfsd,nfs,lockd,nfs_acl
cdfs                   28968  0
fglrx                 656636  11
ipw3945               206116  1
e1000                 122304  0
snd_hda_intel          20120  0
snd_hda_codec         161280  1 snd_hda_intel
intel_agp              24988  1
agpgart                30024  2 fglrx,intel_agp

walter@localhost ~ $ dmesg|grep agp
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 945GM Chipset.
agpgart: AGP aperture is 256M @ 0x0


walter@localhost ~ $ glxinfo |grep direct
direct rendering: Yes
发表于 2007-4-15 15:35:07 | 显示全部楼层
你的opengl切换到ati的驱动了吗?
# eselect opengl list
Available OpenGL implementations:
  [1]   ati *
  [2]   xorg-x11
我的是ati X700,可以到7700FPS左右。
回复 支持 反对

使用道具 举报

发表于 2007-4-15 16:00:58 | 显示全部楼层
差不多吧,再说glxgears并不是跟性能直接相关,而且thinkpad t60上的x1300是不完整的,显存只有64bit,我倒是宁愿使用集成的,可惜当时没有。
回复 支持 反对

使用道具 举报

发表于 2007-4-15 21:09:00 | 显示全部楼层
glxgears 也不是那么能反映真是性能的
回复 支持 反对

使用道具 举报

 楼主| 发表于 2007-4-16 10:32:48 | 显示全部楼层
我已经是ati的,果真如此,还不如选集成显卡。

abc@localhost ~ $ eselect opengl list
Available OpenGL implementations:
  [1]   ati *
  [2]   xorg-x11
walter@localhost ~ $
回复 支持 反对

使用道具 举报

发表于 2007-4-16 12:51:08 | 显示全部楼层
呼,那我这真是可以下课去了,就算是A打头的,也不至于如此吧。
12:47:58 cyber ~ $ glxgears
727 frames in 5.2 seconds = 140.946 FPS
667 frames in 6.1 seconds = 109.583 FPS

12:48:17 cyber ~ $
回复 支持 反对

使用道具 举报

发表于 2007-4-16 15:06:07 | 显示全部楼层
那我这个还算凑合了?呵呵。

$ glxgears
1085 frames in 5.0 seconds = 216.914 FPS
1081 frames in 5.0 seconds = 216.071 FPS
1083 frames in 5.0 seconds = 216.463 FPS
回复 支持 反对

使用道具 举报

发表于 2007-4-16 17:53:37 | 显示全部楼层
27905 frames in 5.0 seconds = 5580.963 FPS
27947 frames in 5.0 seconds = 5589.389 FPS
27957 frames in 5.0 seconds = 5591.256 FPS
回复 支持 反对

使用道具 举报

发表于 2008-4-6 22:50:44 | 显示全部楼层
请问各位是如何驱动x1300 ?
最好细一点。谢谢。
回复 支持 反对

使用道具 举报

 楼主| 发表于 2008-4-9 20:09:22 | 显示全部楼层
有三个驱动程序可以用,
(1)ati-xf86-radeon
(2)ati-driver
(3)ati-xf86-radeonhd
这三个我都用过.用的顺序也是这样. 用的时间最长的事ati-driver安装也比较简单,但是我对其性能不敢恭维,反倒ati-xf86-radeonhd是我现在用的. 虽然不支持2D\3D加速,但是普通的桌面性能是最好的. 这个程序最好按照官方的说明通过git安装。portage中的驱动比较旧。你可以eix radeonhd,根据提示找到相应的官方网站。
关于各种driver的安装方法网上很多,google吧,或者等有时间的人写。
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表