BT878电视卡安装失败

shuifu

系统suse10
内核2.6.13
在yaST中可以正确识别电视卡［BT878］
到了扫描频道的时候显示如下错误：无法装载支持电视卡的内核模块
但是内核已经正确识别电视卡了？？
/etc/目录中没有modules.conf文件
是不是从/usr/src/linux/Documentation/video4linux/bttv/Modules.conf直接复制到/etc目录中？
然后再根据电视卡的型号修改Modules.conf文件？？？
可以正常启动xawtv
但是搜索不到电视台
各位兄弟帮帮忙，为了装上电视卡我已经2个晚上没有睡好觉了，重新编译内核、升级内核都干过了，还是不能扫描频道。
谢谢

shuifu

问题没有解决前，自己先顶一下，别沉下去！

shuifu

问题没有解决，我再顶！

supertc

我的是丽台电视卡tv2000xp，系统安装时先找的是tv2000,如果采用专家模式也是自动找到为bt878的电视卡，也是扫描不行，先开始不添加电视卡设置，直在在系统找到的电视卡上点编辑，选择了tv2000xp，我想你的也试试用tv2000xp的电视卡型号试试，我在系统安装时扫描频道也不行，不过后来在应用程序中可以的

supertc

Linux video capture interface: v1.00
hdd: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
GSI 17 sharing vector 0xB9 and IRQ 17
ACPI: PCI Interrupt 0000:02:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ  185
bttv0: Bt878 (rev 17) at 0000:02:0a.0, irq: 185, latency: 32, mmio: 0xe7000000
bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:660 6
bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00bfb707 [init]
i2c-algo-bit.o: (0) scl=1, sda=1
i2c-algo-bit.o: (1) scl=1, sda=0
i2c-algo-bit.o: (2) scl=1, sda=1
i2c-algo-bit.o: (3) scl=0, sda=1
i2c-algo-bit.o: (4) scl=1, sda=1
i2c-algo-bit.o: bt878 #0 [sw] passed test.
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c: checking for TDA9887 @ 0x86... not found
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
input: bttv IR (card=34) as /class/input/input3
bttv-input: bttv IR (card=34) detected at pci-0000:02:0a.0/ir0
ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
GSI 18 sharing vector 0xC1 and IRQ 18
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ  193
PCI: Via IRQ fixup for 0000:02:09.0, from 10 to 1
eth0: VIA Rhine II at 0x1d200, 00:05:5d:e8:52:5f, IRQ 193.
eth0: MII PHY found at address 8, status 0x786d advertising 05e1 Link 41e1.
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
GSI 19 sharing vector 0xC9 and IRQ 19
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ  201
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:02:0a.1[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ  185
bt878_probe: card id=[0x6606107d], Unknown card.
Exiting..
bt878: probe of 0000:02:0a.1 failed with error -22

sealinger

我用的天敏电视精灵3，芯片是 Conexant 23881 ，suse 认出芯片，但自带的KDETV程序扫描不到频道，配置好电视卡时扫描频道也扫不到。

有 china-bcast 选择，是不是不支持有线电视的？？