|
发表于 2004-5-22 21:12:43
|
显示全部楼层
最初由 deng805 发表
我的信息就比你少了最后两行,比藕节兄多了你说的那两行,但是结果和藕节兄一样
[2] 3485
[root@satan root]# mdc-ssd options in effect:
nodetach # (from /etc/mdc-ssd/options)
logfd 1 # (from /etc/mdc-ssd/options)
dump # (from /etc/mdc-ssd/options)
TLSdebug # (from /etc/mdc-ssd/options)
TLSstate # (from /etc/mdc-ssd/options)
TLSbugs # (from /etc/mdc-ssd/options)
mdc-ssd: mdc-ssd TLS: cert file: /etc/mdc-ssd/eth0/mycert.pem
mdc-ssd: mdc-ssd TLS: key file:
mdc-ssd: unable to get private key from '/etc/mdc-ssd/eth0/mycert.pem'
mdc-ssd: mdc-ssd:TLS error setting user certificate/private key information.
mdc-ssd: Unable to configure Transport Layer Security (TLS).
mdc-ssd: 802.1X: txStart(port=1) (transmit an EAP start packet)
mdc-ssd: 802.1X: supp state -> SSM_CONNECTING for port 1
mdc-ssd: 802.1X: EAP request-ID received.
mdc-ssd: mdc-ssd: txRspId(Transmit our identity (aries) to authenticator)
mdc-ssd: 802.1X: supp state -> SSM_ACQUIRED for port 1
mdc-ssd: 802.1X: Received a authentication request packet with authentication type: 4.
mdc-ssd: 802.1X: txRspAuth(Transmitting a reply to authenticator for authentication type=4
mdc-ssd: 802.1X: supp state -> SSM_AUTHENTICATING for port 1
我把interfaces 设置成dhcp后
上面这些信息后就一直
DHCPDISCOVER on lo to 255.255.255.0````````````
设置成WINDOS下分得的IP后,
有显示address已经在使用
实达,dhcp,有没有弟兄有过这样的情况,告诉我怎么解决的,谢谢了 |
|