sid升级后无法挂载u盘（已解决）

pythonlong

应该是权限问题，但是我修改了/etc/dbus-1/system.d/hal.conf
还是不行

lsgroup发现没呀storage组，不知道怎么办了。
~$dmesg | tail
[  297.944795] sd 3:0:0:0: [sdb] 252928 512-byte hardware sectors: (129 MB/123 MiB)
[  297.945645] sd 3:0:0:0: [sdb] Write Protect is off
[  297.945651] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  297.945655] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  297.947515] sd 3:0:0:0: [sdb] 252928 512-byte hardware sectors: (129 MB/123 MiB)
[  297.948537] sd 3:0:0:0: [sdb] Write Protect is off
[  297.948543] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[  297.948548] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[  297.948554]  sdb: sdb4
[  298.039944] sd 3:0:0:0: [sdb] Attached SCSI removable disk

adam8157

hal 升级后不依赖一个volume的lib，有关系没？

还是不喜欢配hal，改fstab挺方便的

pythonlong

以root权限打开 /etc/PolicyKit/PolicyKit.conf
并将以下内容加到<config version="0.1">和</config>

<match action="org.freedesktop.hal.storage.mount-removable">
    <return result="yes"/>
</match>

<match action="org.freedesktop.hal.storage.mount-fixed">
    <return result="yes"/>
</match>

<match action="org.freedesktop.hal.storage.eject">
    <return result="yes"/>
</match>

找到解决方法：）