求助在debian5.0下 如何安装GF8400GS显卡驱动和声卡

zhanyunan

如题，小弟弄了一天，都不得揪，求求大家帮帮我

contrl

显卡在新立得里可以找到，'nvidia-glx'。声卡是虾米东东，详细说下！声卡，lspci结果贴上来。

zhanyunan

可没有nvidia-glx安装源

Lenovo:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1)
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)
08:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
08:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
08:03.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
08:03.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
08:03.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)

contrl

nvidia没有安装源是因为没有把“软件源”里第一个分页的选择框给全（debian支持的，非debian支持的，贡献的。大概是这个意思吧。手头上没有机器：>)选上，，也可以在sources.list里加上 contrib
non-free
如：
deb http://debian.cn99.com/lenny main contrib non-free
你也可以在sources.list中加入这一行。现在的alsa都支持HD音频了吧。是不是那个喇叭图标有个红叉呢，试过音量能调整吗？错误提示？
编辑源列表：打开root终端，nano －w /etc/apt/sources.list。
不行就google,它是个很好的老师。

L.Lawliet

上NV官方下 .run  驱动吧

声卡一般装 ALSA 就可以了    alsa-base  alsa-utils

contrl

ls的，run驱动好像要个头文件吧，我试过好像搞不定啊，貎似要编译内核什么的啊

L.Lawliet

linux-headers-`uname -r`
build-essential

以上两个包基本是必装的。

run不用编译内核， 只是加了个模块

contrl

哦，我还以为要对应nvidia，的另一个headers呢是我搞错了^_^，谢谢。

superjet

nvidia-glx在源里的non-free部分

支持你的卡的新版驱动现在experimental里面，lenny里的老版能否可用不太清楚，装上module-assistant、nvidia-glx、nvidia-kernel-source后，m-a进去自己编个内核模块就行了，或者自己去nvidia下二进制驱动和内核头文件后安装，这种方式除去安装时狂转一番硬盘，每次内核变动都要重来一遍而不象前者小变动时可以接着用

hd的声卡比较恶心，一直到现在还有好多款在最新版的alsa中无法完全正常工作，自己下个新版的alsa-driver来装

1. 
   
2. ./configure #不想编译其它模块可以指定只变编hda-intel，通用性要差些
   
3. make install-headers install-modules
   

复制代码