[求助]有没有简单点的方法在SUSE Linux Enterprise Desktop 10上打开XGL

oeszzl

我的显卡是GF MX440
有没有简单点的方法在SUSE Linux Enterprise Desktop 10上打开XGL?(能通过装个驱动,或者覆盖掉几个文件实现的)
现在能在网上找到的都是都不动就要加好几十行代码的方法,刚刚接触Linux,还什么都不懂.
前几天从网上下了打开XGL的驱动,结果不是没任何效果,就是显示不出标题拦 最后不得不把SUSE Linux Enterprise Desktop 10格掉了~~~~

blessed

显卡驱动安好了没？必须得先把3D加速打开啊

mtnk

我跟楼主显卡一样，上www.nvidia.com下个for linux的驱动就能打开了。
不需要手动改设置，很方便。

boulevard

NV的卡，添加个源就好了，具体地址在驱动下载页，有个suse专门的说明

blessed

NVIDIA能直接下载RPM包？不是和ATI样了还得--buildpkg

Thruth

http://www.opensuse.org.cn/index.php/在_SUSE_Linux_上使用_Xgl

oeszzl

Post by mtnk
我跟楼主显卡一样，上www.nvidia.com下个for linux的驱动就能打开了。
不需要手动改设置，很方便。

我去 http://www.nvidia.com/   下了一个Linux的驱动,但发现它竟然不是一个可执行的文件,而是类似代码或者脚本的东东,这个是大家说的驱动吗?

引用:STEP 3: Install
Type "sh NVIDIA-Linux-x86-1.0-8762-pkg1.run" to install the driver. NVIDIA now provides a utility to assist you with configuration of your X config file. Please see Chapter 3 of the README or run 'man nvidia-xconfig' for details on usage. Instructions for those wishing to edit their X config file by hand can also be found in the README.

从安装指南上看,这好象是个BUG补丁一样的东西

sonic_yq

http://www.suse.de/~sndirsch/nvidia-installer-HOWTO.html

sonic_yq

SUSE LINUX 10.1-IA32 / SLES10-IA32 / SLED10-IA32
It is recommended to use YaST for installation of the NVIDIA
driver. There are several reasons for this. First, it's
simple. Second, and this is the most important one, you won't need to
recompile the nvidia kernel module after a kernel update.

Update your Kernel via YOU (YaST Online Update). Use

  YaST -> Software -> Change installation Source -> Add

  Protocol: FTP
  Server Name: : download.nvidia.com
  Directory on Server: novell

to add the NVIDIA ftp server as additional installation source.
Now use

  YaST -> Software -> Install and Delete Software

to install the NVIDIA driver. Select the following packages:

  x11-video-nvidia
  nvidia-gfx-kmp-"kernel-flavor"

"kernel-flavor" depends on your installed kernel. Check with
"uname -r" for installed default/smp/bigsmp kernel. Use "sax2 -r"
for X.Org configuration.

People who aren't afraid of recompiling the nvidia kernel module or
even reinstalling the nvidia driver each time the kernel has been
updated and want or need to use the latest and greatest nvidia driver
can use the following steps 1-3. The others should use the
instructions above using YaST and skip the steps below.

1) Kernel sources must be installed and configured. Usually this means
installing the 'kernel-source', 'make' and 'gcc' packages with YaST2.

2) Use the nvidia installer for 1.0-8762.

sh NVIDIA-Linux-x86-1.0-8762-pkg1.run -q

3) Configure X.Org with

sax2 -r -m 0=nvidia (0 is a digit, not a letter!)

NOTE: There is no need to try to enable 3D support. It's already
      enabled, when the nvidia driver is running.

IMPORTANT: You need to recompile and install the nvidia kernel module
           after each kernel update.

sh NVIDIA-Linux-x86-1.0-8762-pkg1.run -K