Post by cccc_magicboy
cccc@linux-zjhm:~> sensors
Can't access procfs/sysfs file
Unable to find i2c bus information;
For 2.6 kernels, make sure you have mounted sysfs and libsensors
was compiled with sysfs support!
For older kernels, make sure you have done 'modprobe i2c-proc'!
cccc@linux-zjhm:~>
请问还用装什么东西吗？？？
要用sensors的话，先要
su
sensors-detect
这个命令用来寻找机器上所有的sensor chips。
根据提示一步步设定，一般默认就好。最后会编译进内核。每次启动会调用lm_sensors。
我的是sony的笔记本。
Sorry, no chips were detected.
Either your sensors are not supported, or they are
connected to an I2C bus adapter that we do not support.
See doc/FAQ, doc/lm_sensors-FAQ.html, or http://www2.lm-sensors.nu/~lm78/ ... lm_sensors-FAQ.html
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, see http://secure.netroedge.com/~lm78/newdrivers.html for driver status.
是不是就说明，没办法看温度了？？？可以windows下用mobilemeter可以看到的。还有硬盘的温度。
Post by cccc_magicboy
我的是sony的笔记本。
Sorry, no chips were detected.
Either your sensors are not supported, or they are
connected to an I2C bus adapter that we do not support.
See doc/FAQ, doc/lm_sensors-FAQ.html, or http://www2.lm-sensors.nu/~lm78/ ... lm_sensors-FAQ.html
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, see http://secure.netroedge.com/~lm78/newdrivers.html for driver status.
是不是就说明，没办法看温度了？？？可以windows下用mobilemeter可以看到的。还有硬盘的温度。
IP卡
狗仔卡
楼主
显身卡
发表于 2006-6-21 22:27:43