|
|
硬件:SUN V440,4G RAM,SCSI 73GB HD *4,no keyboard,no monitor
用2005.0可以启动机器,但不能识别网卡及硬盘.
现在用2005.1启动机机器.到booting....处停止不动
boot: gentoo-2.4
Loading initial ramdisk....
bootmem_init: Scan sp_banks, init_bootmem(min[0], bootmap[1d6], max[91ff71])
free_bootmem(sp_banks:0): base[0] size[40000000]
free_bootmem(sp_banks:1): base[200000000] size[40000000]
free_bootmem(sp_banks:2): base[1000000000] size[40000000]
free_bootmem(sp_banks:3): base[1200000000] size[3e000000]
free_bootmem(sp_banks:4): base[123e002000] size[ffc000]
free_bootmem(sp_banks:5): base[123f002000] size[de4000]
free_bootmem(sp_banks:6): base[123fdea000] size[a6000]
free_bootmem(sp_banks:7): base[123fea0000] size[8000]
free_bootmem(sp_banks:8): base[123fee0000] size[2000]
reserve_bootmem(initrd): base[3ff0e000] size[eccb4]
reserve_bootmem(initrd): base[3ff0e000] size[3fffacb4]
reserve_bootmem(kernel): base[0] size[3aae50]
reserve_bootmem(bootmap): base[3ac000] size[123ff0]
Remapping the kernel... done.
Booting Linux...
mem_init: Calling free_all_bootmem().
Starting CPU 0... OK
PROMLIB: Sun IEEE Boot Prom 4.16.1 2004/09/03 04:22
Linux version 2.4.31-sparc (root@v240) (gcc version 3.3.5 (Gentoo Linux 3.3.5)) #1 SMP Mon Aug 1 13:39:38 UTC 2005
ARCH: SUN4U
Ethernet address: 00:03:ba:ab:9b:c3
On node 0 totalpages: 523369
zone(0): 9568113 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f0067210,mid=0)
Found CPU 1 (node=f0067a90,mid=1)
Found 2 CPU prom device tree node(s).
Kernel command line: root=/dev/ram0 init=/linuxrc looptype=squashfs loop=/livecd.squashfs cdroot
Calibrating delay loop... 1061.68 BogoMIPS
Memory: 3289800k available (2064k kernel code, 480k data, 168k init) [fffff80000000000,000000123fee2000]
Dentry cache hash table entries: 262144 (order: 9, 4194304 bytes)
Inode cache hash table entries: 262144 (order: 9, 4194304 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 262144 (order: 8, 2097152 bytes)
Page-cache hash table entries: 524288 (order: 9, 4194304 bytes)
POSIX conformance testing by UNIFIX
Entering UltraSMPenguin Mode...
Calibrating delay loop... 1061.68 BogoMIPS
Total of 2 processors activated (2123.36 BogoMIPS).
CPU 0: synchronized TICK with master CPU (last diff 0 cycles,maxerr 5 cycles)
Waiting on wait_init_idle (map = 0x1)
All processors have done init_idle
PCI: Probing for controllers.
TOMATILLO0 PBMA: ver[4:0], portid 1c, cregs[4000e400000] pregs[4000e600000]
TOMATILLO0 PBMA: PCI CFG[7ce00000000] IO[7ce01000000] MEM[7cf00000000]
TOMATILLO0 PBMB: ver[4:0], portid 1d, cregs[4000ec00000] pregs[4000ef00000]
TOMATILLO0 PBMB: PCI CFG[7c600000000] IO[7c601000000] MEM[7c700000000]
TOMATILLO1 PBMA: ver[4:0], portid 1e, cregs[4000f400000] pregs[4000f600000]
TOMATILLO1 PBMA: PCI CFG[7fe00000000] IO[7fe01000000] MEM[7ff00000000]
TOMATILLO1 PBMB: ver[4:0], portid 1f, cregs[4000fc00000] pregs[4000ff00000]
TOMATILLO1 PBMB: PCI CFG[7f600000000] IO[7f601000000] MEM[7f700000000]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[23]
PCI-IRQ: Routing bus[ 0] slot[ 2] map[0] to INO[24]
PCI1(PBMB): Bus running at 33MHz
PCI-IRQ: Routing bus[ 1] slot[ a] map[0] to INO[21]
PCI-IRQ: Routing bus[ 1] slot[ b] map[0] to INO[25]
PCI-IRQ: Routing bus[ 1] slot[ d] map[0] to INO[26]
PCI1(PBMA): Bus running at 33MHz
PCI-IRQ: Routing bus[ 2] slot[ 2] map[0] to INO[00]
PCI0(PBMB): Bus running at 66MHz
PCI0(PBMA): Bus running at 66MHz
isa0: [flashprom] [rtc] [i2c -> (i2c-bridge) (i2c-bridge) (temperature) (gpio) (gpio) (gpio) (gpio) (hardware-monitor) (temperature) (temperature-sensor) (motherboard-fru-prom) (power-supply-fru-prom) (rmc-fru-prom) (scsi-fru-prom) (power-supply-fru-prom) (dimm-spd) (dimm-spd) (dimm-spd) (dimm-spd) (cpu-fru-prom) (dimm-spd) (dimm-spd) (dimm-spd) (dimm-spd) (cpu-fru-prom) (clock-generator)] [power] [serial] [serial] [rmc-comm]
ebus: No EBus's found.
PCIO serial driver version 1.54
su(serial) at 0x7fe010003f8 (tty 0 irq 12,7a2) is a 16550A
su(serial) at 0x7fe010002e8 (tty 1 irq 12,7a2) is a 16550A
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 01:0d.0
ALI15X3: chipset revision 196
ALI15X3: 100% native mode on irq 4,7a6
ide0: BM-DMA at 0x7fe01000920-0x7fe01000927, BIOS settings: hda:pio, hdb:pioALI15X3: simplex device: DMA forced
ide1: BM-DMA at 0x7fe01000928-0x7fe0100092f, BIOS settings: hdc MA, hddMAhda: TOSHIBA ODD-DVD SD-C2732, ATAPI CD/DVD-ROM drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide0 at 0x7fe01000900-0x7fe01000907,0x7fe0100091a on irq 4,7a6
hda: attached ide-cdrom driver.
hda: ATAPI 24X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 32768 buckets, 512Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 947k freed
VFS: Mounted root (ext2 filesystem) readonly.
Mounted devfs on /dev
>> Loading modules
>> Making tmpfs for /newroot
>> Attempting to mount CD:- /dev/cdroms/cdrom0
>> CD medium found on /dev/cdroms/cdrom0
>> Determining root device...
>> Determining looptype ...
>> Mounting squashfs filesystem
>> Copying read-write image contents to tmpfs
>> No cdupdate.sh script found, skipping...
>> Booting...
记得第一次用2005.1启动时,是可以的.
以下是第一次启动时,Booting...后面的信息:
>> Booting...
INIT: version 2.86 booting
Gentoo Linux; http://www.gentoo.org/
Copyright 1999-2005 Gentoo Foundation; Distributed under the GPLv2
* Mounting proc at /proc ... [ ok ]
* Kernel automatically mounted devfs at /dev ... [ ok ]
* Starting devfsd ...Started device management daemon v1.3.25 for /dev
[ ok ]
* Activating (possible) swap ... [ ok ]
* Remounting root filesystem read/write ... [ ok ]
* Setting hostname to livecd ... [ ok ]
* Mounting local filesystems ... [ ok ]
* Mounting USB device filesystem (usbfs) ... [ ok ]
* Activating (possibly) more swap ... [ ok ]
* Setting system clock to hardware clock [UTC] ... [ ok ]
* Updating inittab ... [ ok ]
* Caching service dependencies ... [ ok ]
* Configuring kernel parameters ... [ ok ]
* Updating environment ... [ ok ]
* Cleaning /var/lock, /var/run ... [ ok ]
* Setting DNS domainname to gentoo ... [ ok ]
* Starting lo
* Bringing up lo ... [ ok ]
INIT: Entering runlevel: 3ber generator ... [
[ ok ]
* Starting syslog-ng ... [ ok ]
* Hardware detection started ...
* ... [ ok ]
Autoconfiguring devices... Done.
[ ok ]
* Not Loading APM Bios support. ... [ ok ]
* Starting hdparm ... [ ok ]
* Running hdparm on /dev/cdroms/cdrom0 ...
* Coldplugging input devices ... [ ok ]
* Coldplugging isapnp devices ... [ ok ]
* Coldplugging pci devices ... [ ok ]
* Coldplugging pnp devices ... [ ok ]
* Coldplugging usb devices ... [ ok ]
* No Network device auto detected. ...
* Auto-scrambling root password for security ... [ ok ]
* Starting loc
Welcome to the Gentoo Linux Universal Installation CD!
The root password on this system has been auto-scrambled for security.
If any ethernet adapters were detected at boot, they should be auto-configured
if DHCP is available on your network. Type "net-setup eth0" to specify eth0 IP
address settings by hand.
Check /etc/kernels/kernel-config-* for kernel configuration(s).
Stage tarball(s), distfiles and packages can be found in /mnt/cdrom/.
You can view the networkless installation instructions for this release by
typing "links /mnt/cdrom/docs/handbook/html".
The latest version of the Handbook is always available from the Gentoo web
site by typing "links http://www.gentoo.org/doc/en/handbook/handbook.xml".
To start an ssh server on this system, type "/etc/init.d/sshd start". If you
need to log in remotely as root, type "passwd root" to reset root's password
to a known value.
Please report any bugs you find to http://bugs.gentoo.org. Be sure to include
detailed information about how to reproduce the bug you are reporting.
Thank you for using Gentoo Linux!
livecd root #
Vendor: SEAGATE Model: ST373207LSUN72G Rev: 0354
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST373207LSUN72G Rev: 0354
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST373207LSUN72G Rev: 0354
Type: Direct-Access ANSI SCSI revision: 03
Vendor: SEAGATE Model: ST373207LSUN72G Rev: 0354
Type: Direct-Access ANSI SCSI revision: 03
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
Attached scsi disk sdd at scsi0, channel 0, id 3, lun 0
SCSI device sda: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdb: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdc: 143374738 512-byte hdwr sectors (73408 MB)
SCSI device sdd: 143374738 512-byte hdwr sectors (73408 MB)
但似乎2005.1也不能识别网卡.
不知道这台机器能不能装上Gentoo 2005.1?
或者有什么办法解决?? |
|
IP卡
狗仔卡
发表于 2005-11-12 11:53:25
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主