|
|
我的机子是这样的,本来是集成的sis661FX的显卡,后面我加了一块独立显卡,ati redaon 9550 256M 128bit的,本来是emerge ati-drivers,没有配置成功,我就emerge -C ati-driviers 后面我在ati的官方下载的最新驱动安装了,安装成功了,可是beyond@gentoo ~/picture $ aticonfig --initial --input=/etc/X11/xorg.conf
Found fglrx primary device section
Nothing to do, terminating.
还有
beyond@gentoo ~/picture $ glxgears
1344 frames in 5.2 seconds = 257.847 FPS
1320 frames in 5.3 seconds = 251.013 FPS
X connection to :0.0 broken (explicit kill or server shutdown).
这也太低了吧
下面是我的emerge --info
beyond@gentoo ~ $ sudo emerge --info
Portage 2.1.3.16 (default-linux/x86/2006.1, gcc-4.1.2, glibc-2.5-r4, 2.6.22-gentoo-r5 i686)
=================================================================
System uname: 2.6.22-gentoo-r5 i686 Intel(R) Celeron(R) CPU 2.80GHz
Timestamp of tree: Fri, 02 Nov 2007 20:50:01 +0000
ccache version 2.4 [enabled]
app-shells/bash: 3.2_p17
dev-java/java-config: 1.3.7, 2.0.33-r1
dev-lang/python: 2.4.4-r4
dev-python/pycrypto: 2.0.1-r6
dev-util/ccache: 2.4-r7
sys-apps/baselayout: 1.12.9-r2
sys-apps/sandbox: 1.2.18.1-r2
sys-devel/autoconf: 2.13, 2.61-r1
sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2, 1.10
sys-devel/binutils: 2.17
sys-devel/gcc-config: 1.3.16
sys-devel/libtool: 1.5.24
virtual/os-headers: 2.6.21
ACCEPT_KEYWORDS="x86"
CBUILD="i686-pc-linux-gnu"
CFLAGS="-O2 -march=i686 -pipe"
CHOST="i686-pc-linux-gnu"
CONFIG_PROTECT="/etc /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config"
CONFIG_PROTECT_MASK="/etc/env.d /etc/env.d/java/ /etc/fonts/fonts.conf /etc/gconf /etc/revdep-rebuild /etc/terminfo"
CXXFLAGS="-O2 -march=i686 -pipe"
DISTDIR="/usr/portage/distfiles"
FEATURES="ccache distlocks metadata-transfer sandbox sfperms strict unmerge-orphans userfetch"
GENTOO_MIRRORS="ftp://gentoo.anheng.com.cn/gentoo/ ftp://gentoo.chem.wisc.edu/gentoo/ ftp://linux.ntcu.net/dists/gentoo/ http://mirrors.acm.cs.rpi.edu/gentoo/"
MAKEOPTS="-j2"
PKGDIR="/usr/portage/packages"
PORTAGE_RSYNC_OPTS="--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages --filter=H_**/files/digest-*"
PORTAGE_TMPDIR="/var/tmp"
PORTDIR="/usr/portage"
PORTDIR_OVERLAY="/usr/portage/local/layman/gentoo-china"
SYNC="rsync://linux.ntcu.net/gentoo-portage"
USE="berkdb bitmap-fonts cli cracklib crypt cups dri fortran gdbm gif gpm iconv ipv6 isdnlog midi mudflap ncurses nls nptl nptlonly openmp pam pcre perl ppds pppd python readline reflection session spl ssl tcpd truetype-fonts type1-fonts unicode x86 xorg zlib" ALSA_CARDS="AC'97" ALSA_PCM_PLUGINS="adpcm alaw asym copy dmix dshare dsnoop empty extplug file hooks iec958 ioplug ladspa lfloat linear meter mulaw multi null plug rate route share shm softvol" ELIBC="glibc" INPUT_DEVICES="keyboard mouse evdev" KERNEL="linux" LCD_DEVICES="bayrad cfontz cfontz633 glk hd44780 lb216 lcdm001 mtxorb ncurses text" USERLAND="GNU" VIDEO_CARDS="redaon"
Unset: CPPFLAGS, CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, LINGUAS, PORTAGE_COMPRESS, PORTAGE_COMPRESS_FLAGS, PORTAGE_RSYNC_EXTRA_OPTS
下面是dmesg
beyond@gentoo ~ $ dmesg
Linux version 2.6.22-gentoo-r5 (root@livecd) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #1 SMP Thu Jan 17 14:22:16 UTC 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff30000 (usable)
BIOS-e820: 000000001ff30000 - 000000001ff40000 (ACPI data)
BIOS-e820: 000000001ff40000 - 000000001fff0000 (ACPI NVS)
BIOS-e820: 000000001fff0000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
found SMP MP-table at 000ff780
Entering add_active_range(0, 0, 130864) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 130864
HighMem 130864 -> 130864
early_node_map[1] active PFN ranges
0: 0 -> 130864
On node 0 totalpages: 130864
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 990 pages used for memmap
Normal zone: 125778 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000FAD90, 0014 (r0 ACPIAM)
ACPI: RSDT 1FF30000, 0030 (r1 A M I OEMRSDT 9000521 MSFT 97)
ACPI: FACP 1FF30200, 0081 (r2 A M I OEMFACP 9000521 MSFT 97)
ACPI: DSDT 1FF303F0, 386E (r1 100XX 100XX001 1 INTL 2002026)
ACPI: FACS 1FF40000, 0040
ACPI: APIC 1FF30390, 005C (r1 A M I OEMAPIC 9000521 MSFT 97)
ACPI: OEMB 1FF40040, 0040 (r1 A M I AMI_OEM 9000521 MSFT 97)
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:df7c0000)
Built 1 zonelists. Total pages: 129842
Kernel command line: real_root=/dev/sda9
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 2786.337 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 513288k/523456k available (2053k kernel code, 9616k reserved, 597k data, 280k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
lowmem : 0xc0000000 - 0xdff30000 ( 511 MB)
.init : 0xc039d000 - 0xc03e3000 ( 280 kB)
.data : 0xc0301591 - 0xc0396d44 ( 597 kB)
.text : 0xc0100000 - 0xc0301591 (2053 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5577.12 BogoMIPS (lpj=9291407)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 20000000 00000000 0000b180 0000651d 00000000 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20070126
CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 09
Total of 1 processors activated (5577.12 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
Generic PHY: Registered new driver
SCSI subsystem initialized
libata version 2.21 loaded.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Time: tsc clocksource has been installed.
pnp: 00:08: ioport range 0x290-0x297 has been reserved
pnp: 00:09: iomem range 0xffe80000-0xffefffff could not be reserved
pnp: 00:0a: ioport range 0x900-0x90f has been reserved
pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:0a: iomem range 0xfff80000-0xffffffff could not be reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0x1ffeffff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: dfe00000-dfefffff
PREFETCH window: 9fd00000-dfcfffff
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1876k freed
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
io scheduler noop registered
io scheduler deadline registered (default)
Boot video device is 0000:01:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: module loaded
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 16
eth0: RealTek RTL8139 at 0xe0816800, 00:15:f2:c0:4a:f6, IRQ 16
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 17
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda MA, hdbMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdcMA, hddMA
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: ASUS DVD-E616A, ATAPI CD/DVD-ROM drive
hdc: drive side 80-wire cable detection failed, limiting max speed to UDMA33
hdc: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide0...
hdc: ATAPI 48X DVD-ROM drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
sata_sis 0000:00:05.0: version 0.8
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 18
sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
scsi0 : sata_sis
scsi1 : sata_sis
ata1: SATA max UDMA/133 cmd 0x0001eff0 ctl 0x0001efe6 bmdma 0x0001ef90 irq 18
ata2: SATA max UDMA/133 cmd 0x0001efa8 ctl 0x0001efe2 bmdma 0x0001ef98 irq 18
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-6: ST380011AS, 3.46, max UDMA/133
ata2.00: 156301488 sectors, multi 16: LBA NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST380011AS 3.46 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 > sda3
sd 1:0:0:0: [sda] Attached SCSI disk
PNP: PS/2 Controller [PNP0303 S2K,PNP0f03S2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
EISA: Probing bus 0 at eisa.0
EISA: Detected 0 cards.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Freeing unused kernel memory: 280k freed
ata1: exception Emask 0x10 SAct 0x0 SErr 0x180001 action 0x3
ata1: soft resetting port
ata1: SATA link down (SStatus 0 SControl 300)
ata1: EH complete
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 19
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 19, io mem 0xdffff000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xdfffc000
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.1 -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xdfffd000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:03.2: irq 22, io mem 0xdfffe000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
sl811: driver sl811-hcd, 19 May 2005
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
sd 1:0:0:0: Attached scsi generic sg0 type 0
Real Time Clock Driver v1.12ac
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
fglrx: Unknown symbol agp_bind_memory
fglrx: Unknown symbol agp_enable
fglrx: Unknown symbol agp_backend_acquire
fglrx: Unknown symbol agp_free_memory
fglrx: Unknown symbol agp_allocate_memory
fglrx: Unknown symbol agp_unbind_memory
fglrx: Unknown symbol agp_copy_info
fglrx: Unknown symbol agp_backend_release
EXT3 FS on sda9, internal journal
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on sda10, internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1004020k swap on /dev/sda8. Priority:-1 extents:1 across:1004020k
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
NTFS driver 2.1.28 [Flags: R/O MODULE].
NTFS-fs warning (device sda5): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
fglrx: Unknown symbol agp_bind_memory
fglrx: Unknown symbol agp_enable
fglrx: Unknown symbol agp_backend_acquire
fglrx: Unknown symbol agp_free_memory
fglrx: Unknown symbol agp_allocate_memory
fglrx: Unknown symbol agp_unbind_memory
fglrx: Unknown symbol agp_copy_info
fglrx: Unknown symbol agp_backend_release
eth0: no IPv6 routers present
fglrx: Unknown symbol agp_bind_memory
fglrx: Unknown symbol agp_enable
fglrx: Unknown symbol agp_backend_acquire
fglrx: Unknown symbol agp_free_memory
fglrx: Unknown symbol agp_allocate_memory
fglrx: Unknown symbol agp_unbind_memory
fglrx: Unknown symbol agp_copy_info
fglrx: Unknown symbol agp_backend_release
fglrx: Unknown symbol agp_bind_memory
fglrx: Unknown symbol agp_enable
fglrx: Unknown symbol agp_backend_acquire
fglrx: Unknown symbol agp_free_memory
fglrx: Unknown symbol agp_allocate_memory
fglrx: Unknown symbol agp_unbind_memory
fglrx: Unknown symbol agp_copy_info
fglrx: Unknown symbol agp_backend_release
fglrx: Unknown symbol agp_bind_memory
fglrx: Unknown symbol agp_enable
fglrx: Unknown symbol agp_backend_acquire
fglrx: Unknown symbol agp_free_memory
fglrx: Unknown symbol agp_allocate_memory
fglrx: Unknown symbol agp_unbind_memory
fglrx: Unknown symbol agp_copy_info
fglrx: Unknown symbol agp_backend_release
fglrx: Unknown symbol agp_bind_memory
fglrx: Unknown symbol agp_enable
fglrx: Unknown symbol agp_backend_acquire
fglrx: Unknown symbol agp_free_memory
fglrx: Unknown symbol agp_allocate_memory
fglrx: Unknown symbol agp_unbind_memory
fglrx: Unknown symbol agp_copy_info
fglrx: Unknown symbol agp_backend_release
fglrx: Unknown symbol agp_bind_memory
fglrx: Unknown symbol agp_enable
fglrx: Unknown symbol agp_backend_acquire
fglrx: Unknown symbol agp_free_memory
fglrx: Unknown symbol agp_allocate_memory
fglrx: Unknown symbol agp_unbind_memory
fglrx: Unknown symbol agp_copy_info
fglrx: Unknown symbol agp_backend_release
fglrx: Unknown symbol agp_bind_memory
fglrx: Unknown symbol agp_enable
fglrx: Unknown symbol agp_backend_acquire
fglrx: Unknown symbol agp_free_memory
fglrx: Unknown symbol agp_allocate_memory
fglrx: Unknown symbol agp_unbind_memory
fglrx: Unknown symbol agp_copy_info
fglrx: Unknown symbol agp_backend_release
fglrx: Unknown symbol agp_bind_memory
fglrx: Unknown symbol agp_enable
fglrx: Unknown symbol agp_backend_acquire
fglrx: Unknown symbol agp_free_memory
fglrx: Unknown symbol agp_allocate_memory
fglrx: Unknown symbol agp_unbind_memory
fglrx: Unknown symbol agp_copy_info
fglrx: Unknown symbol agp_backend_release
貌似问题出在dmesg的后面,可是我太菜了,看不懂,会懂的朋友帮忙分析一下,先谢了,我都搞了两天的,实在是没有办法了 |
|
IP卡
狗仔卡
发表于 2008-1-19 23:26:26
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
显身卡
楼主