怎么把eth1固定成eth0

sofire

郁闷，没弄懂Gentoo中的udev是怎么生成的规则，在/etc/udev/rules.d/70-persistent-net.rules　文件中自动生成了两个规则：
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:0c:29:1a:40:4c", NAME="eth0"

# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:0c:29:0f:b8:00", NAME="eth1"

请教怎么把网卡固定成eth0，同时生成eth0，和eth1也可以

blackwhite

SUBSYSTEM=="net", DRIVERS=="?*", ATTRS{address}=="00:0c:29:1a:40:4c", NAME="eth0"

修改ATTRS{address}=="你需要网卡的MAC ADDR“。

sofire

这两条规则是自动生成的，改它没用。

blackwhite

如果我没有记错，在我的机器上，我就是这么干的。
看看其他高手有什么建议。

yggdrasil

没错，2楼正解

galaxy001

cat /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, probably run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.

所以可以自己修改.