[已OK]与Sony Ericsson无线上网卡连接问题！

hooong.jiang

大家好！

我的电脑是IBM X41，系统Gentoo、Kernel 2.6.21-r3。
现刚买到了一块Sony Ericsson GC89无线网卡，这个网卡支持EDGE/GPRS/WIFI等。

我按照这里：http://jakilinux.org/aplikacje/iplus-w-linuksie
进行设置，信息显示已自动获得IP与DNS，但ping不通网址也打不开网页！

希望大伙帮忙看看，如何解决？先多谢大家！

我的ppp设置文件：
/etc/ppp/peers/iplus

1. 
   
2. noauth
   
3. connect "/usr/sbin/chat -v -f /etc/ppp/peers/iplus-connect"
   
4. disconnect "/usr/sbin/chat -v -f /etc/ppp/peers/iplus-disconnect"
   
5. debug
   
6. /dev/ttyS0
   
7. 57600
   
8. defaultroute
   
9. crtscts
   
10. lock
    
11. local
    
12. nodetach
    
13. usepeerdns
    
14. lcp-echo-failure 4
    
15. lcp-echo-interval 65535
    

复制代码

/etc/ppp/peers/iplus-connect

1. 
   
2. TIMEOUT 600
   
3. ABORT 'BUSY'
   
4. ABORT 'NO ANSWER'
   
5. ABORT 'ERROR'
   
6. SAY 'Starting GPRS connect script\n'
   
7. 
   
8. "" 'AT+CFUN=1,1'
   
9. 
   
10. OK 'ATE1\d'
    
11. 
    
12. SAY 'Setting APN\n'
    
13. OK 'AT+CGDCONT=1,"IP","CMNET"'
    
14. 
    
15. ABORT 'NO CARRIER'
    
16. SAY 'Dialing...\n'
    
17. OK 'ATD*99***1#'
    
18. 
    
19. CONNECT ''
    
20. 
    

复制代码

pppd call iplus 的连接信息:

1. 
   
2. Gentoo jiang # pppd call iplus
   
3. Starting GPRS connect script
   
4. Setting APN
   
5. Dialing...
   
6. Serial connection established.
   
7. using channel 1
   
8. Using interface ppp0
   
9. Connect: ppp0 <--> /dev/ttyS0
   
10. sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8fd2820e> <pcomp> <accomp>]
    
11. rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x8fd2820e> <pcomp> <accomp>]
    
12. sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8fd2820e> <pcomp> <accomp>]
    
13. rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x8fd2820e> <pcomp> <accomp>]
    
14. rcvd [LCP ConfReq id=0xf3 <mru 1500> <asyncmap 0x0> <auth pap> <magic 0x200069> <pcomp> <accomp>]
    
15. No auth is possible
    
16. sent [LCP ConfRej id=0xf3 <auth pap>]
    
17. rcvd [LCP ConfReq id=0xf4 <mru 1500> <asyncmap 0x0> <magic 0x200069> <pcomp> <accomp>]
    
18. sent [LCP ConfAck id=0xf4 <mru 1500> <asyncmap 0x0> <magic 0x200069> <pcomp> <accomp>]
    
19. sent [LCP EchoReq id=0x0 magic=0x8fd2820e]
    
20. sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
    
21. sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    
22. rcvd [IPCP ConfReq id=0xf3 <addr 10.227.133.0> <compress VJ 0f 01>]
    
23. sent [IPCP ConfAck id=0xf3 <addr 10.227.133.0> <compress VJ 0f 01>]
    
24. rcvd [LCP EchoRep id=0x0 magic=0x8fd2820e]
    
25. appear to have received our own echo-reply!
    
26. rcvd [LCP ProtRej id=0xf5 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
    
27. Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
    
28. rcvd [IPCP ConfNak id=0x1 <addr 10.227.133.111> <ms-dns1 211.136.20.203> <ms-dns3 211.136.17.107>]
    
29. sent [IPCP ConfReq id=0x2 <compress VJ 0f 01> <addr 10.227.133.111> <ms-dns1 211.136.20.203> <ms-dns3 211.136.17.107>]
    
30. rcvd [IPCP ConfAck id=0x2 <compress VJ 0f 01> <addr 10.227.133.111> <ms-dns1 211.136.20.203> <ms-dns3 211.136.17.107>]
    
31. not replacing existing default route to eth0 [192.168.1.1]
    
32. local  IP address 10.227.133.111
    
33. remote IP address 10.227.133.0
    
34. primary   DNS address 211.136.20.203
    
35. secondary DNS address 211.136.17.107
    
36. Script /etc/ppp/ip-up started (pid 5843)
    
37. Script /etc/ppp/ip-up finished (pid 5843), status = 0x1
    

复制代码

hooong.jiang

呵呵，OK了，好开心！EDGE的速度还是不错哦！原来我没有把/etc/conf.d/net 设置为ttyS0。改为如下就好啦！

1. 
   
2.   config_ppp0=( "ppp" )
   
3.   link_ppp0="/dev/ttyS0"
   

复制代码

不过还是疑惑与上面的连接信息相同，没有显示"CONNECT"呢？也不返回待输入命令状态！