ppp by gprs problem, help pls

arli

我用ppp拨gprs，拨不上去了。。日志如下

2. pppd[6052]: Connect: ppp0 <--> /dev/ttyACM0
3. pppd[6052]: rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0x0> <auth pap> <magic 0xe8030000> <pcomp> <accomp>]
4. pppd[6052]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x6a931d51> <pcomp> <accomp>]
5. pppd[6052]: sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0x0> <auth pap> <magic 0xe8030000> <pcomp> <accomp>]
6. pppd[6052]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x6a931d51> <pcomp> <accomp>]
7. pppd[6052]: sent [PAP AuthReq id=0x1 user="wap" password=<hidden>]
8. pppd[6052]: sent [PAP AuthReq id=0x2 user="wap" password=<hidden>]
9. pppd[6052]: rcvd [IPCP ConfReq id=0x1]
10. pppd[6052]: discarding proto 0x8021 in phase 5
11. pppd[6052]: sent [PAP AuthReq id=0x3 user="wap" password=<hidden>]
12. pppd[6052]: rcvd [PAP AuthAck id=0x3 "Welcome to Motorola Ezx Software Modem!"]
13. pppd[6052]: Remote message: Welcome to Motorola Ezx Software Modem!
14. pppd[6052]: PAP authentication succeeded
15. pppd[6052]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0>]
16. pppd[6052]: rcvd [IPCP ConfNak id=0x1 <addr 10.66.23.11>]
17. pppd[6052]: sent [IPCP ConfReq id=0x2 <addr 10.66.23.11>]
18. pppd[6052]: rcvd [IPCP ConfAck id=0x2 <addr 10.66.23.11>]
19. pppd[6052]: rcvd [IPCP ConfReq id=0x1]
20. pppd[6052]: sent [IPCP ConfNak id=0x1 <addr 0.0.0.0>]
21. pppd[6052]: rcvd [LCP TermReq id=0x2 00 00 00 00 00 00]
22. pppd[6052]: LCP terminated by peer (^@^@^@^@^@^@)
23. pppd[6052]: sent [LCP TermAck id=0x2]
24. pppd[6052]: Modem hangup
25. pppd[6052]: Connection terminated.
26. pppd[6052]: Exit.

复制代码

ppp 配置文件如下：

2. #options
3. 460800
4. connect '/usr/sbin/chat -v -f /etc/ppp/peers/cmwap-connect.chat'
5. debug
6. defaultroute "/dev/ttyACM0"
7. ipcp-no-addresses
8. lcp-echo-failure 0
9. lcp-echo-interval 0
10. lock
11. modem
12. noauth
13. noccp
14. nodetach
15. noipdefault
16. novj
17. password cmwap
18. user cmwap

复制代码

2. #cmwap-connect.chat
3. 'ABORT' 'BUSY'
4. 'ABORT' 'ERROR'
5. 'ABORT' 'NO ANSWER'
6. 'ABORT' 'NO CARRIER'
7. 'ABORT' 'NO DIALTONE'
8. 'ABORT' 'Invalid Login'
9. 'ABORT' 'Login incorrect'
10. '' 'ATZ'
11. 'TIMEOUT' '10'
12. 'OK' 'ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0'
13. 'OK' 'AT+CGDCONT=1,"IP","CMWAP"'
14. 'OK' 'ATD*99#'
15. 'CONNECT' ''

复制代码

可以肯定的说 at 指令和波特率都没有问题，我特别用windows机器测试过并做日志比对过，AT指令顺序是一样的。。
而且IP也取到了。。似乎是在较劲 dns？
是不是最近移动改了啥东西了？

因为很久没用gprs了，有熟ppp 或 IPCP协议的朋友帮帮忙。。官站的howto 也连不上。。:mad:

hooong.jiang

我的是用西门子手机边接的，先用在NET设置为ppp0, 然后用kppp拨号，

1. 
   
2.   GNU nano 2.0.2                           File: /etc/conf.d/net
   
3. 
   
4. # This blank configuration will automatically use DHCP for any net.*
   
5. # scripts in /etc/init.d.  To create a more complete configuration,
   
6. # please review /etc/conf.d/net.example and save your configuration
   
7. # in /etc/conf.d/net (this file :]!).
   
8. 
   
9. dns_domain_lo="home"
   
10. 
    
11. # config_eth0=( "adsl" )
    
12. # adsl_user_eth0="username"
    
13. 
    
14. # config_eth0=( "dhcp" )
    
15. # dhcp_eth0="nodns nontp nonis"
    
16. 
    
17. # config_eth0=( "192.168.1.2 netmask 255.255.255.0 brd 192.168.1.255" )
    
18. # routes_eth0=( "default gw 192.168.1.1" )
    
19. 
    
20. config_ppp0=( "ppp" )
    
21. link_ppp0="/dev/ttyUSB0"
    

复制代码

kppp的modem commands设置：

1. 
   
2. pre-init delay(sec/100):        50
   
3. initialization string 1:        ATZ
   
4. initialization string 2;        AT+CGDCONT=1,IP,CMNET
   
5. Post-init delay(sec/100):        50
   
6. Dialing speed(sec/100):                70
   
7. Init response:                        OK
   
8. No dial tone detection:                ATX3
   
9. Dial string:                        ATDT
   
10. Connect response:                CONNECT
    
11. Busy response:                        BUSY
    
12. No carrier response:                NO CARRIER
    
13. No dial tone response:                NO DIALTONE
    
14. Hangup string:                        +++ATH
    
15. Hangup response:                OK
    
16. answer string:                        ATA
    
17. Ring response:                        RING
    
18. Answer response                        CONNECT
    
19. DLP response:                        DIGITAL L.INE DETECTD
    
20. Escape string:                        +++
    
21. Escape response:                OK
    
22. Guard time(sec/50):                50
    
23. Volume off/low/high:                M0L0 M1L1 M1L3
    

复制代码

arli

3q 楼上的，可惜我的那台机器没装wm。。

还有哪位兄弟用ppp拨号的吗。。without gui
是我的脚本没配好，还是此modem比较特殊？。。。

最后一顶，版主帮忙表删，有ppp（包括wvdial） 拨 gprs 的帮忙试下
或者推荐一个可以dump 这个应答过程包的东东（打算跟踪 ipcp），象以前rs232口我还会抓，usb modem没抓过。。