rp-pppoe的问题。。

zyiyi

弱弱的问下，装了rp-pppoe的服务器和拨号程序后，
就能直接用了吗？

好像看到要adsl modem的，没有行不行呀？

没有的话，我试了一下，好像老报错：
adsl-status: link is down--could not find interface
corresponding to pppd 3923

谢谢：）

晨想

应该有个什么  pppoe-setup 之类的吧。运行一下？

zyiyi

server端：
运行了pppoe-server -I eth0 -L 10.13.82.190 -R 10.13.82.193
         echo "1" > /proc/sys/net/ipv4/ip-forward
这两个命令

client端：
运行了ifup ppp0命令 或者adsl-start命令，
然后，adsl-status，就发现
adsl-status: link is down--could not find interface corresponding to pppd 3923的错误。。

zyiyi

[root@zyiyi root]# pppoe-setup
Welcome to the Roaring Penguin PPPoE client setup.  First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...

Looks good!  Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default zyiyi): zyiyi

INTERFACE

>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0): eth1

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped.  If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses.  You may have some problems with demand-activated links.
>>> Enter the demand value (default no): no

DNS

Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here: server

PASSWORD

>>> Please enter your PPPoE password:
>>> Please re-enter your PPPoE password:

FIREWALLING

Please choose the firewall rules to use.  Note that these rules are
very basic.  You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security.  If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself.  Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc.  If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 - NONE: This script will not set any firewall rules.  You are responsible
          for ensuring the security of your machine.  You are STRONGLY
          recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
                for a LAN
>>> Choose a type of firewall (0-2): 0

** Summary of what you entered **

Ethernet Interface: eth1
User name:          zyiyi
Activate-on-demand: No
DNS addresses:      Supplied by ISP's server
Firewalling:        NONE

>>> Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/ppp/pppoe.conf
Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
  (But first backing it up to /etc/ppp/pap-secrets-bak)
  (But first backing it up to /etc/ppp/chap-secrets-bak)



Congratulations, it should be all set up!

Type 'pppoe-start' to bring up your PPPoE link and 'pppoe-stop' to bring
it down.  Type 'pppoe-status' to see the link status.
[root@zyiyi root]# pppoe-start
................TIMED OUT
/usr/sbin/pppoe-start: line 191:  2497 Terminated              $CONNECT "$@" >/dev/null 2>&1

pppoe-start运行的时候:
[root@zyiyi root]# pppoe-status
pppoe-status: Link is attached to ppp0, but ppp0 is down

pppoe-start退出以后:
[root@zyiyi root]# pppoe-status
pppoe-status: Link is down (can't read pppoe PID file /var/run/pppoe.conf-pppoe.pid.pppoe)

zyiyi

redhat-config-network中, 试着激活ppp0设备也不能激活