设为首页收藏本站

LinuxSir.cn，穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
LinuxSir.cn，穿越时空的Linuxsir!»论坛 › Linux 发行版讨论区 —— LinuxSir.cn › Gentoo Linux › [求助]开机出现acpi错误
返回列表 发新帖
查看: 1079|回复: 1

[求助]开机出现acpi错误

[复制链接]
发表于 2007-3-30 19:37:35 | 显示全部楼层 |阅读模式
以前用《=2.6.19内核都没问题
升级2.6.20以后好几个版本了
开机在splash之前都会出现
ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
错误
不过不影响使用，就是看着不爽，
问问大家怎么解决啊？

  2. xfrank@KenShinXF ~ $ dmesg
  3. b80), AE_TIME
  4. ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
  5. ACPI: EC: input buffer is not empty, aborting transaction
  6. ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707]
  7. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node c137e914), AE_TIME
  8. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node c137eea0), AE_TIME
  9. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.BAT0._STA] (Node c137eb80), AE_TIME
  10. ACPI Error (uteval-0212): Method execution failed [\_SB_.PCI0.BAT0._STA] (Node c137eb80), AE_TIME
  11. ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
  12. ACPI: EC: input buffer is not empty, aborting transaction
  13. ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707]
  14. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node c137e914), AE_TIME
  15. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node c137eea0), AE_TIME
  16. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.BAT0._STA] (Node c137eb80), AE_TIME
  17. ACPI Error (uteval-0212): Method execution failed [\_SB_.PCI0.BAT0._STA] (Node c137eb80), AE_TIME
  18. ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
  19. ACPI: EC: input buffer is not empty, aborting transaction
  20. ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707]
  21. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node c137e914), AE_TIME
  22. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node c137eea0), AE_TIME
  23. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.BAT0._STA] (Node c137eb80), AE_TIME
  24. ACPI Error (uteval-0212): Method execution failed [\_SB_.PCI0.BAT0._STA] (Node c137eb80), AE_TIME
  25. ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
  26. ACPI: EC: input buffer is not empty, aborting transaction
  27. ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707]
  28. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node c137e914), AE_TIME
  29. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node c137eea0), AE_TIME
  30. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.BAT0._STA] (Node c137eb80), AE_TIME
  31. ACPI Error (uteval-0212): Method execution failed [\_SB_.PCI0.BAT0._STA] (Node c137eb80), AE_TIME
  32. ACPI: EC: acpi_ec_wait timeout, status = 255, expect_event = 2
  33. ACPI: EC: input buffer is not empty, aborting transaction
  34. ACPI Exception (evregion-0424): AE_TIME, Returned by Handler for [EmbeddedControl] [20060707]
  35. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.SBRG.EC0_.RDC3] (Node c137e914), AE_TIME
  36. ACPI Error (psparse-0537): Method parse/execution failed [\ECIO] (Node c137eea0), AE_TIME
  37. ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.BAT0._STA] (Node c137eb80), AE_TIME
  38. ACPI Error (uteval-0212): Method execution failed [\_SB_.PCI0.BAT0._STA] (Node c137eb80), AE_TIME
  39. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  40. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
  41. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
  42. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 14 15)
  43. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 7 10 11 12 14 15)
  44. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
  45. Linux Plug and Play Support v0.97 (c) Adam Belay
  46. pnp: PnP ACPI init
  47. pnp: PnP ACPI: found 13 devices
  48. SCSI subsystem initialized
  49. usbcore: registered new interface driver usbfs
  50. usbcore: registered new interface driver hub
  51. usbcore: registered new device driver usb
  52. PCI: Using ACPI for IRQ routing
  53. PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  54. NET: Registered protocol family 23
  55. pnp: 00:08: ioport range 0x228-0x22f has been reserved
  56. ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 4
  57. PCI: setting IRQ 4 as level-triggered
  58. ACPI: PCI Interrupt 0000:02:05.1[b] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4
  59. ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[4]  MMIO=[fe000000-fe0007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
  60. PCI: Bridge: 0000:00:01.0
  61.   IO window: e000-efff
  62.   MEM window: fd900000-fdcfffff
  63.   PREFETCH window: cfe00000-efdfffff
  64. PCI: Bus 3, cardbus bridge: 0000:02:05.0
  65.   IO window: 00001000-000010ff
  66.   IO window: 00001400-000014ff
  67.   PREFETCH window: 20000000-23ffffff
  68.   MEM window: 28000000-2bffffff
  69. PCI: Bridge: 0000:00:14.4
  70.   IO window: 1000-1fff
  71.   MEM window: fdd00000-fe0fffff
  72.   PREFETCH window: 20000000-23ffffff
  73. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
  74. PCI: setting IRQ 5 as level-triggered
  75. ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
  76. NET: Registered protocol family 2
  77. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  78. TCP established hash table entries: 16384 (order: 4, 65536 bytes)
  79. TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  80. TCP: Hash tables configured (established 16384 bind 8192)
  81. TCP reno registered
  82. checking if image is initramfs... it is
  83. Freeing initrd memory: 761k freed
  84. Machine check exception polling timer started.
  85. NTFS driver 2.1.28 [Flags: R/W].
  86. io scheduler noop registered
  87. io scheduler cfq registered (default)
  88. Real Time Clock Driver v1.12ac
  89. Linux agpgart interface v0.101 (c) Dave Jones
  90. agpgart: Detected Ati IGP9100/M chipset
  91. agpgart: AGP aperture is 128M @ 0xf0000000
  92. [drm] Initialized drm 1.1.0 20060810
  93. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
  94. PCI: setting IRQ 11 as level-triggered
  95. ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
  96. [drm] Initialized radeon 1.25.0 20060524 on minor 0
  97. vesafb: unrecognized option mtrr
  98. vesafb: ATI Technologies Inc., BS3 , 01.00 (OEM: ATI MOBILITY RADEON 9100 IGP)
  99. vesafb: VBE version: 2.0
  100. vesafb: protected mode interface info at c000:520f
  101. vesafb: pmi: set display start = c00c527d, set palette = c00c52b7
  102. vesafb: pmi: ports = e010 e016 e054 e038 e03c e05c e000 e004 e0b0 e0b2 e0b4
  103. vesafb: no monitor limits have been set
  104. vesafb: scrolling: ywrap using protected mode interface, yres_virtual=3072
  105. Console: switching to colour frame buffer device 128x48
  106. fbsplash: console 0 using theme 'gentoo-blue'
  107. fbsplash: switched splash state to 'on' on console 0
  108. vesafb: framebuffer at 0xd0000000, mapped to 0xd8900000, using 6144k, total 131072k
  109. fb0: VESA VGA frame buffer device
  110. ACPI: AC Adapter [AC0] (on-line)
  111. ACPI: Battery Slot [BAT0] (battery present)
  112. input: Power Button (FF) as /class/input/input0
  113. ACPI: Power Button (FF) [PWRF]
  114. input: Lid Switch as /class/input/input1
  115. ACPI: Lid Switch [LID]
  116. input: Sleep Button (CM) as /class/input/input2
  117. ACPI: Sleep Button (CM) [SLPB]
  118. input: Power Button (CM) as /class/input/input3
  119. ACPI: Power Button (CM) [PWRB]
  120. ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
  121. Using specific hotkey driver
  122. ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000319073e]
  123. ACPI: duty_cycle spans bit 4
  124. ACPI: Thermal Zone [THRM] (30 C)
  125. Asus Laptop ACPI Extras version 0.30
  126.   L4R model detected, supported
  127. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
  128. serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  129. ACPI: PCI Interrupt 0000:00:14.6[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
  130. ACPI: PCI interrupt for device 0000:00:14.6 disabled
  131. floppy0: no floppy controllers found
  132. RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
  133. loop: loaded (max 8 devices)
  134. b44.c:v1.01 (Jun 16, 2006)
  135. ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKC] -> GSI 4 (level, low) -> IRQ 4
  136. eth0: Broadcom 4400 10/100BaseT Ethernet 00:0e:a6:b4:6e:2b
  137. Linux video capture interface: v2.00
  138. saa7130/34: v4l2 driver version 0.2.14 loaded
  139. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  140. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  141. ATIIXP: IDE controller at PCI slot 0000:00:14.1
  142. ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
  143. ATIIXP: chipset revision 0
  144. ATIIXP: not 100% native mode: will probe irqs later
  145.     ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:pio
  146.     ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:pio
  147. Probing IDE interface ide0...
  148. hda: IC25N040ATMR04-0, ATA DISK drive
  149. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  150. Probing IDE interface ide1...
  151. hdc: TOSHIBA DVD-ROM SD-C2612, ATAPI CD/DVD-ROM drive
  152. ide1 at 0x170-0x177,0x376 on irq 15
  153. hda: max request size: 512KiB
  154. hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100)
  155. hda: cache flushes supported
  156. hda: hda1 hda2 < hda5 hda6 > hda3
  157. hdc: ATAPI 24X DVD-ROM drive, 192kB Cache, UDMA(33)
  158. Uniform CD-ROM driver Revision: 3.20
  159. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
  160. PCI: setting IRQ 10 as level-triggered
  161. ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
  162. ehci_hcd 0000:00:13.2: EHCI Host Controller
  163. ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
  164. ehci_hcd 0000:00:13.2: irq 10, io mem 0xfeb00000
  165. ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  166. usb usb1: configuration #1 chosen from 1 choice
  167. hub 1-0:1.0: USB hub found
  168. hub 1-0:1.0: 6 ports detected
  169. hub 1-0:1.0: over-current change on port 1
  170. ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
  171. ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
  172. ohci_hcd 0000:00:13.0: OHCI Host Controller
  173. ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
  174. ohci_hcd 0000:00:13.0: irq 10, io mem 0xfe900000
  175. usb usb2: configuration #1 chosen from 1 choice
  176. hub 2-0:1.0: USB hub found
  177. hub 2-0:1.0: 3 ports detected
  178. ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
  179. ohci_hcd 0000:00:13.1: OHCI Host Controller
  180. ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
  181. ohci_hcd 0000:00:13.1: irq 10, io mem 0xfea00000
  182. usb usb3: configuration #1 chosen from 1 choice
  183. hub 3-0:1.0: USB hub found
  184. hub 3-0:1.0: 3 ports detected
  185. hub 1-0:1.0: over-current change on port 6
  186. USB Universal Host Controller Interface driver v3.0
  187. Initializing USB Mass Storage driver...
  188. usb 3-1: new low speed USB device using ohci_hcd and address 2
  189. usb 3-1: configuration #1 chosen from 1 choice
  190. usbcore: registered new interface driver usb-storage
  191. USB Mass Storage support registered.
  192. input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
  193. input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-1
  194. usbcore: registered new interface driver usbhid
  195. drivers/usb/input/hid-core.c: v2.6:USB HID core driver
  196. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
  197. i8042.c: Detected active multiplexing controller, rev 1.1.
  198. serio: i8042 KBD port at 0x60,0x64 irq 1
  199. serio: i8042 AUX0 port at 0x60,0x64 irq 12
  200. serio: i8042 AUX1 port at 0x60,0x64 irq 12
  201. serio: i8042 AUX2 port at 0x60,0x64 irq 12
  202. serio: i8042 AUX3 port at 0x60,0x64 irq 12
  203. mice: PS/2 mouse device common for all mice
  204. input: AT Translated Set 2 keyboard as /class/input/input5
  205. input: PS/2 Mouse as /class/input/input6
  206. input: AlpsPS/2 ALPS GlidePoint as /class/input/input7
  207. i2c /dev entries driver
  208. IPv4 over IPv4 tunneling driver
  209. ip_tables: (C) 2000-2006 Netfilter Core Team
  210. TCP cubic registered
  211. NET: Registered protocol family 1
  212. NET: Registered protocol family 17
  213. NET: Registered protocol family 15
  214. speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated.
  215. Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.
  216. Using IPI Shortcut mode
  217. ACPI: (supports S0 S1 S3 S4 S5)
  218. Time: tsc clocksource has been installed.
  219. ReiserFS: hda3: found reiserfs format "3.6" with standard journal
  220. ReiserFS: hda3: using ordered data mode
  221. ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
  222. ReiserFS: hda3: checking transaction log (hda3)
  223. ReiserFS: hda3: Using r5 hash to sort names
  224. VFS: Mounted root (reiserfs filesystem) readonly.
  225. Freeing unused kernel memory: 180k freed
  226. ACPI: PCI Interrupt 0000:00:14.5[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
  227. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  228. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
  229. Adding 586332k swap on /dev/hda6.  Priority:-1 extents:1 across:586332k
  230. fbsplash: console 1 using theme 'gentoo-blue'
  231. fbsplash: switched splash state to 'on' on console 1
  232. fbsplash: console 2 using theme 'gentoo-blue'
  233. fbsplash: switched splash state to 'on' on console 2
  234. fbsplash: console 3 using theme 'gentoo-blue'
  235. fbsplash: switched splash state to 'on' on console 3
  236. fbsplash: console 4 using theme 'gentoo-blue'
  237. fbsplash: switched splash state to 'on' on console 4
  238. fbsplash: console 5 using theme 'gentoo-blue'
  239. fbsplash: switched splash state to 'on' on console 5
  240. fbsplash: console 6 using theme 'gentoo-blue'
  241. fbsplash: switched splash state to 'on' on console 6
  242. fbsplash: console 7 using theme 'gentoo-blue'
  243. fbsplash: switched splash state to 'on' on console 7
  244. fbsplash: console 8 using theme 'gentoo-blue'
  245. fbsplash: switched splash state to 'on' on console 8
  246. fbsplash: console 9 using theme 'gentoo-blue'
  247. fbsplash: switched splash state to 'on' on console 9
  248. fbsplash: console 10 using theme 'gentoo-blue'
  249. fbsplash: switched splash state to 'on' on console 10
  250. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
  251. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
  252. agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
  253. [drm] Setting GART location based on old memory map
  254. [drm] Loading R200 Microcode
  255. [drm] writeback test succeeded in 1 usecs
  256. spurious 8259A interrupt: IRQ7.
  257. b44: eth0: Link is up at 100 Mbps, full duplex.
  258. b44: eth0: Flow control is off for TX and off for RX.
  259. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
  260. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
  261. agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
  262. [drm] Loading R200 Microcode
  263. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
  264. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
  265. agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
  266. [drm] Loading R200 Microcode
  267. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
  268. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
  269. agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
  270. [drm] Loading R200 Microcode
  271. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
  272. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
  273. agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
  274. [drm] Loading R200 Microcode
  275. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
  276. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
  277. agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
  278. [drm] Loading R200 Microcode
  279. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
  280. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
  281. agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
  282. [drm] Loading R200 Microcode
  283. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
  284. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
  285. agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
  286. [drm] Loading R200 Microcode
  287. agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
  288. agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
  289. agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
  290. [drm] Loading R200 Microcode
  291. xfrank@KenShinXF ~ $                    
复制代码
回复

使用道具 举报

 楼主| 发表于 2007-4-1 22:07:33 | 显示全部楼层
自己顶一下
看来没人出现这个问题？
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表