X起不了

michael.lou

failde to load module  "1830"
..................................."mouse"
.................................."kbd"


请指教thx

etheldreda

最简单的方法：进livecd，把里面的xorg.conf拷过来，然后根据情况改动，到gentoo网站上可以找到指南

michael.lou

我觉得问题不是在设置，为什么会load不到moduel呢？

michael.lou

就算显卡load不到，连键盘也load不到奇怪了，其故的是usb鼠标load不到我notebook的tuchpad居然load了。不明白

etheldreda

把配置文件贴出来看看

michael.lou

Section "ServerLayout"
        Identifier     "Layout"
        Screen         "Screen 1"
        InputDevice    "Mouse1" "SendCoreEvents"
        InputDevice    "Keyboard1" "CoreKeyboard"
        InputDevice    "Touchpad"  "CorePointer"
        Option         "offTime"     "20"
        Option         "StandbyTime"  "5"
        Option         "SuspendTime"  "10"
EndSection

Section "Files"
        RgbPath      "/usr/share/X11/rgb"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "/usr/share/fonts/misc"
        FontPath     "/usr/share/fonts/75dpi"
        FontPath     "/usr/share/fonts/100dpi"
        FontPath     "/usr/share/fonts/TTF"
        FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
        SubSection "extmod"
           Option "omit xfree86-dga"
        EndSubSection
        Load  "glx"
        Load  "extmod"
        Load  "xtrap"
        Load  "record"
        Load  "dbe"
        Load  "dri"
        Load  "freetype"
        Load  "type1"
        Load  "synaptics"

EndSection

Section "InputDevice"
        Identifier  "Keyboard1"
        Driver      "kbd"
        Option      "CoreKeyboard"
        Option      "AutoRepeat" "500 30"
        Option      "XkbRules"   "xorg"
        Option      "XkbModel"   "pc101"
        Option      "XkbLayout"  "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse1"
        Driver      "mouse"
        Option      "CorePointer"
        Option            "rotocol" "IMPS/2"
        Option            "Device" "/dev/input/mouse1"
        Option            "ZAxisMapping" "4 5"
        Option      "Emulate3Buttons" "yes"
EndSection

Section "InputDevice"
        Identifier  "Touchpad"
        Driver       "synaptics"
        Option      "Device"  "/dev/input/event0"
        Option       "rotocol" "event"

EndSection

Section "Monitor"
        Identifier   "LCD"
        HorizSync    31.5 - 79.0
        VertRefresh  50-100
        Option       "DPMS"
        Modeline     "1280x800" 101.92 1280 1312 1696 1728 800 816 825 841
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "ShadowFB"                   # [<bool>]
        #Option     "KGAUniversal"               # [<bool>]
        Identifier  "i830" #"Card0"
        Driver      "i830" #"vga"
        VideoRam    65536
        Option      "VBERestore" "true"
        Option      "DRI"
        Option      "AGPFastWrite" "true"
        Option      "MonitorLayout" "LEP"
        Option      "ActiveDevice"  "LCD"
        VendorName  "Intel Corporation"
        BoardName   "82852/855GM Integrated Graphics Device"
        BusID       "CI:0:2:0"
EndSection

Section "Screen"
        Identifier "Screen 1"
        Device     "i830" #"Card0"
        Monitor    "LCD"
        DefaultDepth  24
        SubSection "Display"
                Viewport   0 0
                Depth      24
                Modes      "1280x800"
        EndSubSection

       
EndSection

Section "DRI"
        Mode 0666
EndSection

michael.lou

再附上lspci
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
02:01.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
02:04.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
02:04.1 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
02:04.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller
02:04.3 Mass storage controller: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller
02:05.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)



另外一个问题我究竟要i810 i830 i915  哪一个呢？

michael.lou

帮帮小弟吧！

etheldreda

应该用i810,试试我上传的文件，不行的话可以去www.ubuntu.org.cn论坛问配置差不多的人要个现成的，我刚装的时候也碰到一样的问题，后来就备份了一下gentoo，装了个ubuntu，把xorg。conf拷过来才搞定。

michael.lou

先谢谢etheldreda的热心帮助

还是同样的问题。
太奇怪了我参考了很多文章了已经。