Pls help on ADSL installation.

dshuang001

My computer Network Card (NC) is RTL8111B, ADSL is HA500.

First, setup up NC in Suse10.1 YAST, select DHCP to get all IP address automatically. In NC select list, can not find RTL8111B, so skipped the selection ( also tried RTL8139 ). Restart computer after all. Ping 192.168.1.1 failure, so continue to setup DSL modem. Select protocol PPP over Ethernet. From the list of ADSL manufacture and device number, can not find proper choice, so tried many choices. After DSL modem setup, I try to dial-up to internet but failed, checked log file I found following failure message.

SuSE Meta pppd (smpppd-ifcfg), Version 1.59 on home.
Status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
Interface is eth0.
Status is: connecting
pppd[0]: Plugin rp-pppoe.so loaded.
pppd[0]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.3
pppd[0]: Plugin passwordfd.so loaded.
Status is: disconnected
pppd[0] died: pppd options error (exit code 2)

Pls help me to explain, thanks in advance.

I don’t know if it is due to that Suse 10.1 can not support RTL8111B. Since in WINDOS XP, after I connected my ADSL modem and power it up, I can see “local network connected” signal , of course I can ping through 192.168.1.1 (my ADSL modem IP) or do ADSL setup using IE (http://192.168.1.1).

pengiums

Sir,
    ping 192.168.1.1 failed is because you don't have DHCP Server,So ,you don't have     IP address. you can use "ifconfig eth0 192.168.1.2" or set in YAST.rember,use static IP.

If you have all installed,Set the ADSL equiment startup in system boot. Suse 10.0 like has a bug---if system has startuped,you wanted reconnected the Internet was difficult.

At the end,I mean to say,if you are a Chinese,please speak national language,because of my English is very very poor~~

dshuang001

谢谢！今晚回去试试。

以后用中文好了。

我的中文打字速度太慢，上次好不容易敲完了，在贴的时候出现“超过了论坛规定的时间”的警告，再回去就找不到了，很生气。

dshuang001

Post by dshuang001
ifconfig eth0 192.168.1.2" or set in YAST.rember,use static IP。

不对，我记得我试过的，不行。

pengiums

你的NIC是否已经启动？如果已启动的话，看一下能否ping通你的HA500，能通的话，仔细地查看一下你拨号的设置。

dshuang001

其实我一真在怀疑是不是Suse不支持NIC，我的NIC芯片是RTL8111B。在网上找不到驱动程序。实际设置时我试了很多种系统列出来的NIC，完成设置后YAST有激活NIC的运行步骤，但依然不能ping通。即使重启后也不行。另外HA500在ADSL系统列表中也找不到，试了很多种选择，在拨号时依然出现第1帖中的错误。

dshuang001

可能我找到解决办法了。今晚试试看。

http://forums.suselinuxsupport.de/index.php?showtopic=36365

pengiums

我总觉得还是你NIC的问题。
另外，新建一个“不知名”的连接，没有必要在ADSL列表中找，我的就找不到。