求助：一个困扰很久的问题，电信LAN宽带的拨号？

foxxxx_82

在window下是用pppoe拨号，在linux下要用什么软件呢？

用raspppoe好像不行，那是用于adsl的。 :help

Qlin

不跟win一样吗..把用户名和密码写上去再拨号..

foxxxx_82

Post by Qlin
不跟win一样吗..把用户名和密码写上去再拨号..

用什么软件？

Qlin

比如说.rp-pppoe

foxxxx_82

在RH 7.2的时代就一直试了，没有成功过，那个好像是针对ADSL的

拨号的时候老是提示忙线……

Qlin

是否是本身设置的问题..

我在学校也是这种方式上网.用的rp-pppoe




1.首先确定内核支持ppp.如下:

Network device support --->
<*> PPP (point-to-point protocol) support
<*> PPP support for async serial ports
<*> PPP support for sync tty ports

2.安装rp-pppoe.

3.然后再来设置ADSL。这一处，我们要用命令。

#adsl-setup


Welcome to the Roaring Penguin ADSL client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default XXX): 在这里输入ADSL的用户名

INTERFACE

>>> Enter the Ethernet interface connected to the ADSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0):上网用的网卡接口. 默认eth0

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default no):是按需拨号还是持续拨号.按需是填写空闲时间如60(秒).默认的是持续拨号.

DNS
Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here:域名解析服务器.可填server自动寻找.也可直接填地址.

PASSWORD

>>> Please enter your PPPoE password:输入密码
>>> Please re-enter your PPPoE password:再输入一次

FIREWALLING

Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):防火墙设置. 0-无防火墙 1-基本工作站. 2-局域网网关.

** Summary of what you entered **

Ethernet Interface: eth0
User name: XXX
Activate-on-demand: No
DNS: Do not adjust
Firewalling: MASQUERADE

>>> Accept these settings and adjust configuration files (y/n)? 确认保存退出.

连接adsl使用命令:adsl-start

断开adsl使用命令:adsl-stop

可能遇到一种情况是.adsl拨号上网后.打不开网站.也PING不通.确认前面步骤没错的情况下.拨号连上后使用命令: route add default ppp0

foxxxx_82

非常感谢，我试试